John Deere 2230LL
  • + Expand All
  • - Close All
  • Wing stabilizer wheels ensure steady and consistent operation
    Active-hydraulic castering wheel on 2230FH
    Active-hydraulic castering wheel on 2230FH
    Mechanical stabilizer wheel on 2230LL
    Mechanical stabilizer wheel on 2230LL

    Wing stabilizer wheels are recommended when producers encounter rolling ground conditions, terraces, or when the tool is operated at speeds above 11 km/h (7 mph).


    Stabilizer wheel options and quantities are dependent on the model.

     

    On the 2230LL Level-lift™ Field Cultivator, two mechanical wing stabilizer wheels are included on the outer wings for all five-section configurations. Both three-section and five-section configurations have the option to add stabilizer wheels to the inner wings.

    On the 2230FH Floating Hitch Field Cultivator, the 12.95-m (42-ft, 6-in.) low-transport configuration has the option of adding a pair of mechanical stabilizer wheels. The active-hydraulic castering wheels are included in base equipment for the inner and outer wings on the 2230FH.

    Radial and bias-ply tire options are available for mechanical stabilizer wheels and active-hydraulic castering wheels.

    NOTE:Not all tire options are available for all configurations.

    Configuration Mechanical stabilizer wheels  Active-hydraulic castering wheels
      Base quantity Optional quantity Base quantity Optional quantity
    2230LL Three-section --- 2 --- ---
    Five-section 2 2 --- ---
    Low transport --- 2 --- ---
    2230FH Three-section --- --- 4 ---
    Five-section --- --- 6 ---
    Low transport --- 2 4 ---
    Radial Tire Sizes
    Main Frame

    Wing Frame

    2230LL   Three-section N/A IF280/80 R15
    Six bolt
    Five-section

    IF280/70 R15
    Six bolt

    IF280/70 R15
    Six bolt

    Low transport N/A IF280/80 R15
    Six bolt
    2230FH  Three-section

    IF280/70 R15
    Six bolt

    IF280/70 R15
    Six bolt

     Five-section

    IF320/70 R15
    Eight bolt

    IF320/70 R15
    Six bolt

    Low transport

    IF320/70 R15
    Six bolt

    IF320/70 R15
    Six bolt

         Bias Tire Sizes
    Main Frame

    Wing Frame

    2230LL   Three-section N/A 9.5L-15 LD D
    Six bolt
    Five-section

    9.5L-15 LD D
    Six bolt

    9.5L-15 LD D
    Six bolt

    Low transport N/A  9.5L-15 LD D
    Six bolt
    2230FH  Three-section

    11L-15 FI LR D
    Six bolt

    11L-15 FI LR D
    Six bolt

     Five-section

    12.5L-15 FI LR F
    Eight bolt

    12.5L-15 FI LR D
    Six bolt

    Low transport

    12.5L-15 FI LR D
    Six bolt

    12.5L-15 FI LR D
    Six bolt

  • ProFinish™ Leveling System offers wide range of rear harrows to meet agronomic needs
    #

    The ProFinish Leveling System offers a wide range of rear harrows to meet agronomic needs.

    Depending on agronomic needs, producers have a choice of six rear harrow options included in the ProFinish Leveling System on the 2230 Field Cultivators.

    Capabilities 4-bar coil-tine harrow 6-bar spike-tooth harrow 3-bar coil-tine with round-bar basket 3-bar coil-tine with flat-bar basket 3-bar spike-tooth with round-bar basket 3-bar spike-tooth with flat-bar basket
    Level seedbed Good Better Best Best Best Best
    Firm seedbed Fair Good Best Better Best Better
    Handle residue Best Better Best Best Better Better
    Break up clods Good Better Better Best Better Best
    Handle moisture/wet soil Best Better Good Good Good Good
    Handle rocks Best Good Better Good Better Good

     

  • True 152-mm (6-in.) split-the-middle spacing provides complete field coverage
    TruPosition™ standards on 2230 Field Cultivator
    TruPosition™ standards on 2230 Field Cultivator
    152-mm (6-in.) split-the-middle shank spacing
    152-mm (6-in.) split-the-middle shank spacing

    Thanks to an updated frame design that enables true 152-mm (6-in.) split-the-middle shank spacing, the 2230 Field Cultivators can maintain consistent depth and evenly cover the field to achieve an optimal seedbed and manage weeds.

    Seedbed preparation

    Even at high speeds and in tough field conditions, the TruPosition C-shanks with 91 kg (200 lb) of trip force minimize side-to-side movement and provide the operator better control of the soil profile for improved leveling capabilities.

    These shanks provide a full tillage cut across the entire width of the implement. The shanks stay firmly planted in tough soils without quickly relieving. As a result, the soil is mixed completely and streaks are reduced. This helps producers maximize their productivity and create flat seedbeds for smooth planter operation and consistent seed depth.

    Weed management

    The even 152-mm (6-in.) split-the-middle shank spacing enables the 2230 Field Cultivator to minimize the potential of remaining strips of weeds that survive the tillage pass. With a field cultivator pass just prior to planting/seeding, the crop can emerge into a weed-free field that gives it the best chance to reach canopy ahead of the weeds.

    If some weeds emerge and a post-emergence herbicide is needed, weeds should be smaller and easier to control. As a result, the field cultivator pass helps keep weed management costs under control and helps preserve crop yield potential.

    Spacing options
    True 152-mm (6-in.) split-the-middle spacing
    True 152-mm (6-in.) split-the-middle spacing

    152-mm (6-in.) shank spacing base equipment on the 2230LL and 2230FH. Additional options for implement customization include:

  • Tillage documentation and prescription functionality included with TruSet™ Tillage

    With integrated TruSet Tillage technology, 2230 Field Cultivator operators can incorporate documentation and prescription functionality into their tillage operations. The tillage documentation feature will give producers the ability to capture and analyze the field cultivator pass for additional coverage of the crop production cycle. Prescription functionality provides producers the capability to ensure their tillage operations are executed correctly, optimizing their investment in preparing for the next crop.

    Operators can document data for the depth of their field cultivator sweeps along with rolling basket down pressure. By creating an as-applied map based off of global positioning system (GPS) data for the job performed by each functional area on the implement, TruSet enables producers to document their tillage passes then later review and analyze the data for future agronomic decisions.

    Additionally, the Prescription Creator by Agrian® company, a connected partner tool through the John Deere Operations Center, enables producers to create prescriptions for each functional area on the 2230 Field Cultivators. Data from previous yields, soil surveys, or freehand drawing tools can be used to create prescriptions that will command the implement to the desired depth and pressure settings for optimum agronomic results.

    Agrian is a trademark of Agrian, Inc.

  • Level-lift™ frame ensures even operation through all operating depths
    2230LL Field Cultivator
    2230LL Field Cultivator

    The Level-lift hitch ensures a level operation through all operating depths. It also provides consistent gang and sweep depth fore to aft for thorough seedbed preparation. This quick, easy adjustment ensures a flat seedbed floor and level soil profile for planting.

    The combination of the sweep and harrow functions promotes consistent and uniform chemical placement and mixing. The T-hitch enables easy turnbuckle adjustment for fast tractor changeover and quick implement leveling fore to aft.

    The heavy-duty T-hitch allows for tighter turning, decreasing the amount of headlands required for quick turns on the end. The T-hitch also houses the hoses and wiring harness, protecting them from crop and incidental tire contact.

  • Low-transport configurations available for 2230LL
    2230LL in transport
    2230LL in transport
    Low-transport configuration
    Low-transport configuration

    Low power lines and bridges can be a concern when transporting equipment. The 2230 Field Cultivator lineup includes low-transport configurations as a solution for transportation concerns.

    The 2230LL has two low-transport configurations. These implements fold like a five-section implement, but operate like a three-section implement for improved transportability thanks to the addition of small outer wings that lock rigid for field operation.

    Another advantage of the low-transport models is operation over uneven terrain. The low-transport models allow for the rigid wing to follow the contour of the ground.

     

    Working width Transport height Transport width
    11.7 m (38 ft, 6 in.) 4.1 m (13 ft, 6 in.) 4.3 m (14 ft, 0 in.)
    13.3 m (43 ft, 6 in.) 4.4 m (14 ft, 4 in.) 5.5 m (18 ft, 0 in.)
  • Wide range of working widths available to match acreage and horsepower requirements
    Five-section configuration
    Five-section configuration

    At 16-km/h (10-mph) working speeds, the 2230LL can cover up to 29.5 hectares (73 acres) per hour enabling producers to size their implement for their unique productivity and agronomic needs.

    The 2230LL is available in sizes ranging from 7.2 to 18.4 m (23 ft, 6 in. to 60 ft, 6 in.). Horsepower requirements range from 19.6 to 29.4 kW/m (8 to 12 hp-ft), depending on the soil, depth, and speed.

    Three-section configurations

     

    Working widths Centerframe size Productivity per hour
    at 16 km/h (10 mph)
    7.16 m (23 ft, 6 in.) 2.74 m (9 ft)    11.3 hectares (28 acres)
    7.77 m (25 ft, 6 in.) 12.5 hectares (31 acres)
    8.38 m (27 ft, 6 in.) 13.6 hectares (33 acres)
    8.99 m (29 ft, 6 in.) 14.6 hectares (36 acres)
    9.60 m (31 ft, 6 in.) 3.35 m (11 ft)   15.4 hectares (38 acres)
    10.21 m (33 ft, 6 in.) 16.6 hectares (41 acres)
    10.82 m (35 ft, 6 in.) 17.4 hectares (43 acres)
    11.73 m (38 ft, 6 in.) low transport 2.74 m (9 ft) 19.0 hectares (47 acres)
    13.25 m (43 ft, 6 in.) low transport 3.35 m (11 ft) 21.4 hectares (53 acres)

     

     

    Five-section configurations
    Working widths Centerframe size Productivity per hour
    at 16 km/h (10 mph)
    12.95 m (42 ft, 6 in.) 2.74 m (9 ft) 21.0 hectares (52 acres)
    14.17 m (46 ft, 6 in.) 22.7 hectares (56 acres)
    15.39 m (50 ft, 6 in.) 24.7 hectares (61 acres)
    16.00 m (52 ft, 6 in.) 3.35 m (11 ft) 25.9 hectares (64 acres)
    17.22 m (56 ft, 6 in.) 27.5 hectares (68 acres)
    18.44 m (60 ft, 6 in.) 29.5 hectares (73 acres)
  • Rear hitch compatible with all 2230 configurations and rear harrows
    Rear hitch
    Rear hitch

    A substantial rear hitch is available to give the 2230 the versatility to pull the 200 Seedbed Finisher or other rear attachments. The rear hitch includes:

    • Rectangular tube construction
    • Telescoping hitch
    • Serviceable drawbar
    • 453-kg (1000-lb) tongue weight rating
    • 13,000 gross vehicle weight (GVW) rating for five-section machines; 10,000 gross vehicle weight (GVW) rating for three-section machines
    • Wiring harness for transport lights
    • Hydraulic hoses and couplers
    • Higher load safety chain between tractor and implement

    The rear hitch is fully compatible with all 2230 rear harrow configurations available in the ProFinish™ Leveling System.

  • TruSet™ Tillage provides precise depth and pressure control from the cab on the go
    TruSet and single-point depth control
    TruSet and single-point depth control
    TruSet controller
    TruSet controller

    Integrated TruSet Tillage technology enables field cultivator operators to adjust sweep depth and down pressure on the active hydraulic rolling baskets while on the go to respond to changing field conditions such as varying soils, heavier residue, and moisture.

    With short window of time to perform tillage operations, TruSet can provide significant productivity improvements as operators are able to adjust the field cultivator while covering acres with the push of a button. By responding to conditions as they change throughout the field, TruSet enables operators to generate better-quality tillage performance with the first pass.

    Using a GreenStar™ display, a user sees real-time data for sweep depth and basket down pressure for assurance of desired tillage outcomes. Once the actual set point is validated and configured to the display in the cab, operators are able to make independent adjustments as small as one tenth of an inch. Four customizable presets enable operators to save and name different combinations of settings for their most common field conditions.  

    Single-point depth control is included with the TruSet Tillage system, giving operators the choice of automated or manual adjustments. Hydraulic routings on the 2230 Field Cultivators are designed to allow each implement to feature both TruSet and standard single-point depth control for system redundancy, operator preference, and flexibility at resale.

    Components

    TruSet is compatible with John Deere and competitive tractors. Depending on the tractor, a compatibility kit may be needed in addition to the TruSet Tillage system. The following chart identifies the components needed to operate TruSet on a 2230LL or 2230FH Field Cultivator with a GreenStar ready tractor.

     

    TruSet product John Deere 30 Series
    and newer Tractors
    John Deere 20 Series Tractors (large frame or IVT™ system) John Deere 20 Series Tractors (small frame or non IVT) John Deere 10 Series and older Tractors Competitive tractors
    TruSet Tillage system Yes Yes Yes Yes Yes
    TruSet compatibility kit No No Yes Yes Yes


    Both the TruSet Tillage system and the compatibility kit will be available as a field-installed option that can be ordered with the field cultivator or through aftermarket parts.

    All model years of the 2230LL and 2230FH can be retrofitted with TruSet.

    TruSet Tillage requires a GreenStar ready tractor with a supported display. The TruSet Tillage system must have a connection to the tractor ISO connection. Additional TruSet Tillage information:

Centerframe depth control wheels and tires

Type Center frame tires on Walk-Over tandem wheels (bias-ply tire option available)
3-section Option 1: (4) IF280/70 R15 134D tires
Option 2: (4) IF280/70 R15 134D tires
Option 3: (4) IF280/70 R15 134D tires
Option 4: (4) IF280/70 R15 134D tires
Option 5: (4) IF280/70 R15 134D tires
Option 6: (4) IF280/70 R15 134D tires
Option 7: (4) IF280/70 R15 134D tires
Option 8: (4) IF320/70 R15 144D tires
Option 9: (4) IF320/70 R15 144D tires