John Deere 2230FH
  • + Expand All
  • - Close All
  • True 152-mm (6-in.) split-the-middle spacing provides complete field coverage
    TruPosition™ standards on 2230 Field Cultivator
    TruPosition™ standards on 2230 Field Cultivator
    152-mm (6-in.) split-the-middle shank spacing
    152-mm (6-in.) split-the-middle shank spacing

    Thanks to an updated frame design that enables true 152-mm (6-in.) split-the-middle shank spacing, the 2230 Field Cultivators can maintain consistent depth and evenly cover the field to achieve an optimal seedbed and manage weeds.

    Seedbed preparation

    Even at high speeds and in tough field conditions, the TruPosition C-shanks with 91 kg (200 lb) of trip force minimize side-to-side movement and provide the operator better control of the soil profile for improved leveling capabilities.

     

    These shanks provide a full tillage cut across the entire width of the implement. The shanks stay firmly planted in tough soils without quickly relieving. As a result, the soil is mixed completely and streaks are reduced. This helps producers maximize their productivity and create flat seedbeds for smooth planter operation and consistent seed depth.

    Weed management

    The even 152-mm (6-in.) split-the-middle shank spacing enables the 2230 Field Cultivator to minimize the potential of remaining strips of weeds that survive the tillage pass. With a field cultivator pass just prior to planting/seeding, the crop can emerge into a weed-free field that gives it the best chance to reach canopy ahead of the weeds.

    If some weeds emerge and a post-emergence herbicide is needed, weeds should be smaller and easier to control. As a result, the field cultivator pass helps keep weed management costs under control and helps preserve crop yield potential.

    Spacing options
    True 152-mm (6-in.) split-the-middle spacing
    True 152-mm (6-in.) split-the-middle spacing

    152-mm (6-in.) shank spacing base equipment on the 2230LL and 2230FH. Additional options for implement customization include:

  • Floating hitch frame keeps implement level across varying terrain
    Floating hitch frame on 2230FH
    Floating hitch frame on 2230FH
    Level-lift hitch frame on 2230LL
    Level-lift hitch frame on 2230LL

    The 2230FH Floating Hitch Field Cultivator offers superior ground-hugging capability with precise depth and pressure control across all types of terrain. The floating hitch frame design enables this field cultivator to work independently of the tractor and follow the contour of the ground so the implement remains level. The 2230FH commands consistent depth from front to back and from side to side.

  • TruSet™ features, packages, and documentation
    Overview

    With short windows of time to perform tillage operations, TruSet provides significant productivity improvements as operators can adjust the tool with just the push of a button, maximizing acres covered per day. By responding to conditions as they change throughout the field, TruSet Active enables operators to generate a higher-quality tillage performance within the first pass.

     

    Using a GreenStar™ display, an operator sees real-time data for a variety of feature settings, ensuring confidence in desired tillage outcomes. Four customizable presets enable operators to save and name different combinations of settings for their most common field conditions, which allows for even quicker implement adjustments.

    TruSet allows for adjustments from the cab
    TruSet allows for adjustments from the cab
    TruSet Tillage system
    TruSet Tillage system

    Single-point depth control is included with the TruSet Tillage system, giving operators the choice of automated or manual adjustments. Hydraulic routings on the tool are designed to allow each implement to feature both TruSet and standard single-point depth control for system redundancy, operator preference, and flexibility at resale.

     

    John Deere has expanded TruSet features to bring even more functionality into the cab: 

    • Active depth, and basket pressure and raise
    • Gang angle
    • Hydraulic active stabilizer wheels
    • Hydraulic wing control
    • Hydraulic fore-aft control
    TruSet features and packages

    TruSet Tillage features a variety of technology features and packages. With either the Select or Premium package, you can elevate your experience with some or full control of your tillage tool from the cab at your fingertips. The following table outlines each TruSet offering specific to the implement model. For additional information on each feature, see the details after the table.

     

    TruSet offerings
    Control of: Set-point depth Active depth Basket pressure Side-to-side leveling Gang angle Fore-aft Wing down pressure Stabilizer wheels
    2230 Floating Hitch Field Cultivator --- Select** Select Premium --- --- --- ---
    2230 Level-Lift™ Field Cultivator --- Select** Select --- --- --- --- ---
    2330 Mulch Finisher --- Select** Select Premium** --- Premium** --- ---
    2630 Series Disks --- Select** Select Premium --- Premium** --- Option
    2633VT Vertical Tillage --- Select** Select Premium --- Premium** --- ---
    2660VT Vertical Tillage --- Select** Select Premium Premium Premium Premium Option
    2680H High-Speed Disk* In base --- --- --- --- --- --- ---

    *Currently not available in feature packaging

    **New feature

     

    NOTE: All Select package features are also included in the Premium package.

     

    Active depth (Select and Premium package)

    Adjust depth and pressure while in the field
    Adjust depth and pressure while in the field
    • With TruSet Active, the tillage tool automatically adjusts and keeps the desired depth even through changing field conditions, such as tire sink in soft soils or mud buildup in damp and sticky conditions.
    • This is possible using an ultrasonic sensor that measures the distance from the mainframe to the soil as the implement travels through the field.

     

    Basket pressure and raise (Select and Premium package)

     

    • Integrated TruSet Tillage technology enables the operator to adjust their down pressure on the hydraulic rolling baskets while on the go to respond to changing field conditions such as varying soils, heavier residue, and moisture.
    • Easily raise your baskets with one touch to avoid certain areas of the field, whether you are wanting to check the tillage tool with the baskets up or avoid going through a wet spot in the field. Once you’re through the area and ready to lower the baskets, simply press the basket lower to resume your desired basket pressure. 

     

    Side-to-side leveling (Premium package)

    Individual section leveling with TruSet side-to-side
    Individual section leveling with TruSet side-to-side
    • Operators have the option to enhance the TruSet Tillage system with individual section leveling functionality. TruSet side-to-side is available as a field-installed option that can be ordered with the tillage tool or through aftermarket parts. The base TruSet Tillage system can also be upgraded to TruSet side-to-side with a conversion kit.

     

    Gang angle (Premium package)

    Gang angle adjustment
    Gang angle adjustment
    • With TruSet gang angle control, operators can adjust the gang angle on the go right from the cab. Adjusting the gang angle from 0 to 12 degrees provides more horizontal soil movement. The more aggressive the gang angle, the more soil mixing and burying of residue. Operators can also remove light ruts, tracks, and weeds at the most aggressive gang angle.

     

    Fore-aft (Premium package)

    Hydraulic fore-aft control levels the 2660VT
    Hydraulic fore-aft control levels the 2660VT
    • TruSet hydraulic fore-aft control enables operators to level the implement from the comfort of the tractor cab.

     

    Wing down pressure (Premium package)

    Hydraulic wing control pressure
    Hydraulic wing control pressure
    • TruSet hydraulic wing control transfers the weight from the mainframe to the wings to improve penetration in hard or heavy soils. In high-speed, shallow-depth tillage operations, maintaining a consistent depth across the tillage tool is critical to the consistency of the seedbed.

             

    NOTE: TruSet hydraulic wing control pressure is only offered on three-section models.

     

    Stabilizer wheels (additional factory option)

    • Getting the best field performance is easier with TruSet Active hydraulic stabilizer wheels. Choose the option to easily adjust the depth of the stabilizer wheels from the cab to match the overall depth as changes are made. This feature replaces the mechanical linkage on stabilizer wheels with a hydraulic cylinder.

    NOTE: Stabilizer wheels are not offered on one-section models.

    TruSet documentation

    With integrated TruSet Tillage technology, operators can incorporate documentation and prescription functionality into their tillage operations. The tillage documentation feature allows producers to capture and analyze the tillage pass for additional coverage of the crop production cycle. Prescription functionality provides producers the capability to ensure their tillage operations are executed correctly, optimizing their investment in preparing for the next crop.

     

    Operators can document data for the depth of their tillage tool along with rolling basket down pressure. By creating an as-applied map based off global positioning system (GPS) data for the job performed by each functional area on the implement, TruSet enables producers to document their tillage passes then later review and analyze the data for future agronomic decisions.

     

    Additionally, the Prescription Creator by Agrian® company, a connected partner tool through the John Deere Operations Center, enables producers to create prescriptions for each functional area on the tillage tools. Data from previous yields, soil surveys, or freehand drawing tools can be used to create prescriptions that command the implement to the desired depth and pressure settings for optimum agronomic results.

     

    Agrian is a trademark of Agrian, Inc.

  • Variety of sweeps provide solutions for all soil conditions

    Bolt-on, knock-on, and s-tine sweep options are available to customize the 2230 Field Cultivators to perform well in a variety of field conditions.

       Bolt-on sweeps  Knock-on sweeps  S-tine sweeps* 
    Tru-Width™ High productivity Perma-Loc™ Perma-Loc high productivity Wide S-tine V-pattern S-tine
    152-mm (6-in.) spacing X X X X --- ---
    229-mm (9-in.) spacing X X X X --- ---
    114-mm (4.5-in.) spacing --- --- --- --- X X

    *NOTE: S-tine sweeps not available for all 2230 configurations.

    John Deere’s high-productivity sweep options are recommended for the high-working-speed market and perform best at speeds of 11-16 km/h (7-10 mph). With a low profile and curved wing shape, the high-productivity sweeps provide low draft and consistent penetration while easily getting through tough and heavy residue. Compared to Tru-Width sweeps, high-productivity sweeps are designed to exert less draft and retain their shape for longer wear life so producers can stay productive in the field longer.

    The high-productivity sweeps are available bolt-on and the knock-on Perma-Loc versions. They fit all 47-degree standards with 44-mm (1.75-in.) hole spacing and 11 mm (0.4375 in.) that currently take Tru-Width sweeps, both John Deere and other makes.

    Sweep sizes

    229-mm (9-in.) sweeps and 178-mm (7-in.) sweeps can both be utilized on a machine with shanks on 152-mm (6-in.) spacing. The decision between the two is dependent on soil type, operating speed, and the agronomic goal of the tillage pass.

     

    • 229-mm (9-in.) sweeps – When weed management or weed removal is an important part of the tillage pass, a 229-mm (9-in.) sweep provides more of a cutting edge and can catch weeds that may bend around the wings of the 178-mm (7-in.) sweep.
    • 178-mm (7-in.) sweeps – These sweeps provide enough wing width to maintain full-width tillage, but with less draft load than a 229-mm (9-in.) sweep. Less draft results in the shank maintaining a more consistent depth, especially at higher speeds, and less of a horsepower draw on the tractor. This will be most evident in harder, heavier soil types.
    • 114-mm (4.5-in.) sweeps – These sweeps are only available on S-tine configurations.
    Bolt-on sweeps

    The Tru-Width design offers the following benefits:

    • Maintains full cutting width and point through the life of the sweep
    • Gives greater wear life and improved performance over regular sweeps
    • Provides superior scouring and penetration
    • Works soil well for level seedbed and good seed-to-soil contact
    • Gives excellent chemical incorporation
    • Wears evenly and pulls easily
    • Replacement without charge if breakage occurs before appreciable wear
    Knock-on sweeps
    Perma-Loc sweep
    Perma-Loc sweep
    High-productivity Perma-Loc sweep
    High-productivity Perma-Loc sweep

    Perma-Loc utilizes a self-tightening ratcheting system for easy installation. Indentations formed in the sweep stem provide the spring clip with a locking surface. The adapter edge, sweep, and spring all act together to tightly lock the sweep to the shank. The operator simply pushes the sweep on by hand to the first notch (audible click). As the resistance is increased (ground engagement), the sweep progressively wedges tighter. The mounting design minimizes lost sweeps and wear on adapter.

     

    Utilizing the removal tool to depress the spring through the stem access opening and a tap with a hammer easily releases the sweep from the adapter and spring.

     

    Perma-Loc sweeps have the advantage of using a Tru-Width design for penetration, residue flow, and long life. The proven 47-degree sweep angle minimizes soil slabbing yet promotes soil movement. The narrow stem enhances excellent soil and residue flow. Stem geometry ensures soil flow over the spring access opening, effectively separating and lifting flow to a point higher on the shank. The force of soil flow is reduced on the shank, improving shank life.

     

    Tru-Width sweeps with the Perma-Loc adapter can seamlessly move the high-productivity sweeps. The high-productivity sweeps use the current Perma-Loc adapter for 47-degree curved standard, N237614.

  • Active-hydraulic castering wheels facilitate excellent turning
    Active-hydraulic castering wheel
    Active-hydraulic castering wheel
    Castering wheels on 2230FH
    Castering wheels on 2230FH

    Front-mounted active-hydraulic castering depth-control wheels come standard on the 2230FH Floating Hitch Field Cultivator’s centerframe and wings. These active-hydraulic castering wheels rotate a full 360 degrees and provide good stability at the front of the implement and facilitate excellent turning, reducing tire scuffing.

    Working together with John Deere’s floating hitch, the active-hydraulic castering wheels help ensure level operation for the 2230FH as the implement is free to follow the contour of the terrain. This frame flexibility over rolling terrain provides more uniform depth integrity fore to aft for:

    • Consistent sweep depth
    • Thorough seedbed preparation through the entire width and length of the implement
    • Consistent chemical placement and mixing 

    The active-hydraulic castering wheels can be manually adjusted with a turnbuckle. TruSet™ with side-to-side leveling capabilities also enables operators to individually control wing depth and the castering wheels from the cab while on the go.

  • Regular- and low-transport configuration available for 2230FH
    Low-transport field cultivator
    Low-transport field cultivator

    Low power lines and bridges can be a concern when transporting equipment. The 2230 Field Cultivator lineup includes regular- and low-transport configurations as a solution for transportation concerns.

     

    The 12.95-m (42.5-ft) 2230FH folds like a five-section implement, but operates like a three-section implement. A small wing is added to these implements. This allows them to have an extra fold to achieve the tight and narrow transport dimensions. When the implement is unfolded for operation, the small, outer-wings lock rigid to allow for three-section operation.

     

    Another advantage of the low-transport models is operation in uneven terrain. The low-transport models allow for the rigid wing to follow the contour of the ground.

     

    The regular-transport model features an 18.44-m (60.5-ft) working width on a 4.6-m (15-ft) mainframe that allows for a lower transport height compared to the other 18.44-m (60.5-ft) configuration.

     

    Configuration Working width Transport height Transport width
    Low transport 12.95 m (42.5 ft) 4.22 m (13 ft, 10 in.) 5.33 m (17.5 ft)
    Regular transport 18.44 m (60.5 ft) 4.75 m (15 ft, 7 in.) 7.16 m (23.5 ft)

     

  • ProFinish™ Leveling System offers wide range of rear harrows to meet agronomic needs
    #

    The ProFinish Leveling System offers a wide range of rear harrows to meet agronomic needs.

    Depending on agronomic needs, producers have a choice of six rear harrow options included in the ProFinish Leveling System on the 2230 Field Cultivators.

    Capabilities Four-bar coil-tine harrow Six-bar spike-tooth harrow Three-bar coil-tine with round-bar basket Three-bar coil-tine with flat-bar basket Three-bar spike-tooth with round-bar basket Three-bar spike-tooth with flat-bar basket
    Level seedbed Good Better Best Best Best Best
    Firm seedbed Fair Good Best Better Best Better
    Handle residue Best Better Best Best Better Better
    Break up clods Good Better Better Best Better Best
    Handle moisture/wet soil Best Better Good Good Good Good
    Handle rocks Best Good Better Good Better Good

     

  • Wide range of working widths available to match acreage and horsepower requirements
    Three-section configuration
    Three-section configuration
    Five-section configuration
    Five-section configuration

    At 16-km/h (10-mph) working speeds, the 2230FH can cover up to 34 ha (84 acres) per hour, enabling producers to size their implement for their unique productivity and agronomic needs.

     

    The 2230FH is available in sizes ranging from 7.8 to 21.2 m (25.5 ft to 69.5 ft). Horsepower requirements range from 19.6-29.4 kW/m (8 to 12 hp-ft), depending on the soil, depth, and speed.

    Three-section configurations
    Working widths Centerframe size Productivity per hour
    at 16 km/h (10 mph)
    7.77 m (25.5 ft) 3.4 m (11 ft) 12.5 ha (31 acres)
    8.99 m (29.5 ft) 14.6 ha (36 acres)
    9.60 m (31.5 ft) 15.4 ha (38 acres)
    10.21 m (33.5 ft) 16.6 ha (41 acres)
    10.82 m (35.5 ft) 17.4 ha (43 acres)
    12.95 m (42.5 ft)
    low transport
    21 ha (52 acres)

     

    Five-section configurations
    Working widths Centerframe size Productivity per hour
    at 16 km/h (10 mph)
    12.34 m (40.5 ft) 3.4 m (11 ft) 19.8 ha (49 acres)
    13.56 m (44.5 ft) 21.9 ha (54 acres)
    14.78 m (48.5 ft) 23.9 ha (59 acres)
    16.00 m (52.5 ft) 25.9 ha (64 acres)
    17.22 m (56.5 ft) 27.5 ha (68 acres)
    18.44 m (60.5 ft) 29.5 ha (73 acres)
    18.44 m (60.5 ft) 4.6 m (15 ft) 29.5 ha (73 acres)
    19.66 m (64.5 ft) 31.6 ha (78 acres)
    21.18 m (69.5 ft) 34 ha (84 acres)

     

Centerframe depth control wheels and tires

Type Center frame tires on Walk-Over tandem wheels (bias-ply tire option available)
3-section Option 1: (4) IF280/70 R15 134D tires
Option 2: (4) IF280/70 R15 134D tires
Option 3: (4) IF280/70 R15 134D tires
Option 4: (4) IF280/70 R15 134D tires
Option 5: (4) IF280/70 R15 134D tires
Option 6: (4) IF320/70 R15 144D tires