Bargain Barn Equipment
Key Features & Specs
- 7-Iron™ PRO deck
- Flex Fuel capable (E85)
- Electronic fuel injection
- Fuel Options Gas, EFI, Flex Fuel
- HP* 25 hp
- Deck 7Iron™ PRO Deck
- Deck Size 54", 54" MOD, 60"
Specifications
Blades
| Length | Varies by deck size |
| Thickness | 0.25 in. 0.64 cm |
| Tip speed | Approximately 18,000 fpm 5,486 m/min |
| Number | Three |
Brakes
| Dynamic braking | Twin levers |
| Park brake | Internal wet disk integrated in the transmission |
| Park brake actuation | Hand brake |
Dimensions
| Length | 84 in. 213 cm |
| Width | With chute down, 68, 74 in. 173, 188 cm |
| Height | With ROPS up, 73 in. 185 cm With ROPS down, 47 in. 119 cm |
| Weight | 1,198 to 1,291 lb 543 to 586 kg |
Drivetrain
| Wheel motors | Tuff Torq heavy-duty integrated piston wheel motor |
| Speed and direction control | Twin levers |
| Hydraulic capacity | 5.9 U.S. qt 5.6 L |
| Filter | Internal, replaceable |
| Travel speed | Forward<br/>0-10 mph<br/>0-16.1 km/h<br/>Reverse<br/>0-4.5 mph<br/>0-7.2 km/h<br/> |
Electrical system
| Charge system | 20 amp |
| Battery voltage | 12 V |
| Cold cranking amp | 300 amp |
| Hour meter | Standard, digital |
| Operator presence starting system | Brake-N-Go (hand) |
Engine
| Model no. | FCV740 |
| Horsepower (gross) | At 3,600 rpm, 25 hp 18.6 kW |
| Displacement | 45.6 cu in. 747 cc |
| Cylinders | Two |
| Crankcase capacity | With filter, 2 U.S. qt 1.9 L |
| Oil filter | Full flow, replaceable |
| Lubrication | Full pressure |
| Cooling | Air |
| Air cleaner | Pre-cleaner Yes Heavy-duty canister type with safety element |
Fuel system
| Fuel type | Gasoline or ethanol blends up to E85 |
| Fuel consumption | Under normal conditions, load, operation, and dependent on loads and operating conditions 1.1-1.9 U.S. gal. 4.2-7.2 L/hr |
| Fuel tank capacity | 11.5 U.S. gal. 43.5 L |
| Fuel tank switch/shut-off valve | Yes |
Mower decks
| Available widths | 54, 60 in. 137, 152 cm |
| Deck construction | 7-Iron PRO, one-piece stamped steel with reinforcements |
| Deck thickness | 7 gauge 0.18 in. 4.6 mm |
| Discharge | Side, MOD |
| Height-of-cut range | Increments 0.25 in. 0.64 cm 1-5.5 in. 2.54-14 cm |
| Cutting width | 54, 60 in. 137, 152 cm |
PTO
| Type | Electro-magnetic, 225 lb-ft 305 Nm |
| Drive | V-belt |
Tires
| Drive tires | 24x12-12 (54 in., 60 in.) |
| Load rating | 4 PR |
Wheels
| Caster wheel type | Flat free |
| Caster wheel size | 13x6.5-6 |
| Front anti-scalp rollers | RH, center, LH |
| Rear anti-scalp rollers | Optional |
Additional information
| Date collected | 24-Apr-2017 |
