John Deere 1575
  • + Expand All
  • - Close All
  • Standard premium ComfortCab provides superior comfort and performance
    1575 Front Mower with optional side mirrors, beacon light, and rear lighting 1575 Front Mower with optional side mirrors, beacon light, and rear lighting
    1585 Front Mower and rotary broom with optional exterior mirrors and radio  1585 Front Mower and rotary broom with optional exterior mirrors and radio

    The ComfortCab is standard equipment on the TerrainCut™ 1575 and 1585 Front Mowers. It is one of the most comfortable and easy-to-use cabs available anywhere. This premium cab was developed using extensive research and testing, and some of the most advanced design techniques available.

    Cab vehicles are designed for those operators who demand superior comfort and performance:

    • Large-property owners
    • Commercial operators
    • Governmental agencies
    • Producers

    Whether mowing or doing other implement work (such as use of the snow blower, rotary broom, or front blade), the TerrainCut Front Mowers have the versatility and muscle to get the job done, all while protecting the operator from the elements.

    Design
    Standard equipment ComfortCab Standard equipment ComfortCab
    ComfortCab visibility from operator's seat ComfortCab visibility from operator's seat

    Operators are sure to appreciate what this cab has to offer - beginning with a design with visibility in mind. The cab is designed with robust mounting points integrated into the rollover protective structure (ROPS).

    The spacious design and carefully laid-out interior provide a full 360 degrees of visibility:

    • Operators enjoy a unobstructed view no matter what task is being performed.
    • Operator fatigue caused by awkward bending is reduced, leading to increased overall productivity.
    • The ample headroom and curved glass on all four sides provide a roomy interior and give operators a big-cab feel.
    Climate control system
    Cab air filter Cab air filter
    ComfortCab high-quality interior ComfortCab high-quality interior

    Operators are well-protected from the elements with a high-performance climate-control system providing heating and air conditioning:

    • The climate-controlled cab makes any task more enjoyable, whether on a frigid winter day or a hot summer day.
    • A standard high-efficiency clean-air filter reduces dust and allergen particles.
    Heater and air-conditioning controls and vents Heater and air-conditioning controls and vents
    Heat and air-conditioning roof vents Heat and air-conditioning roof vents

     A high-quality climate-control system for maximum operator comfort is standard equipment with the ComfortCab on the 1575 and the 1585:

    • Heater and air-conditioner controls are conveniently located in headliner.
    • Vents in the roof are located on both sides of the operator.
    ComfortCab features
    Superior operator comfort and visibility Superior operator comfort and visibility
    Right-hand controls, instruments, and cupholder (1575 shown with optional single-spool auxiliary hydraulic kit) Right-hand controls, instruments, and cupholder (1575 shown with optional single-spool auxiliary hydraulic kit)

    Several features are integrated into the design of the cab that deliver superior operator comfort and visibility. These features include:

    • Ultra-quiet interior with noise dampening foam floor mats
    • Curved glass for 360-degree visibility and spacious interior
    • Raised header bar for maximum front visibility
    • Right-hand control center with the most frequently used controls at the operator's fingertips
    • Tilt steering
    • Removable floor
    • In-base equipment, deluxe cloth seat with a retractable seat belt
      • Standard armrests for additional operator comfort
    • Inside rearview mirror for rear visibility
    • Interior dome light for illumination in low-light conditions
    • Standard sun visor to block unwanted sunlight
    • Creature comforts like:
      • Convenient cup holder
      • 12-V power supply
    • Integrated handle providing support for ingress and egress
    • Lockable, push-button entry handles
    • Left-side step for convenient ingress and egress (1585 only)

    Optional comfort features include:

    • Optional dual exterior rearview mirrors for added rear visibility
    • Optional radio mount kit and a choice of field-installed stereos are available:
       
      • Stereo with AM/FM, weatherband, SiriusXM® Satellite, and iPod® ready
      • Radio, Deere/Delco AM/FM stereo with single compact disc player, clock, front audio input jack for MP3 players, and weatherband
      • Stereo with AM/FM, weatherband, SiriusXM Satellite and iPod Ready
    Standard and optional cab operating features
    Standard two-speed windshield wiper control Standard two-speed windshield wiper control
    Optional radio Optional radio

     

    The cab has been designed with many standard features that provide ease and convenience for the operator:

    • Standard two-speed front windshield wiper to keep the front glass clear
    • Dual roof-mounted forward work lights for optimum forward visibility at night
    • Integrated warning lights/turn signals, protected from trees and branches
    • Double-spool auxiliary hydraulic valve with forward-mounted couplers (base code 2443TC - 1575, 2463TC - 1585)

    The cab has been designed to easily accept accessories that improve operator comfort and performance:

    • Pre-wired for optional accessories like a radio, rear work lights, and beacon light
    • Dual roof-mounted rearward work lights for optimum rearward visibility at night
    Seat
    Seat and controls Seat and controls
    Comfortable cloth seat Comfortable cloth seat

    Comfortable cloth seat is provided for the operator.

     

    A deluxe cloth air-ride seat with retractable seat belt is in base equipment on cab models:

    • An ergonomically sculpted seat cushion, lumbar, adjustable seat back, air suspension, and seat armrests are combined to provide excellent operator comfort and support.
    • The operator can adjust suspension by increasing/decreasing pressure to place arrow in center of gauge for optimum comfort.
    • Using a lever located under the seat, the seat is adjustable fore and aft for operator height.
    • Retractable seat belts prevent belts from becoming tangled in the seat suspension and controls.
    Standard lighting
    Two standard front lights Two standard front lights
    #

    Optional lighting includes:

    • Dual roof-mounted adjustable rear work lights
    • Rotating beacon light
    Cab safety features
    • ROPS - Certified to the highest industry standards for maximum operator protection
    • Operator presence system
    • Right-side emergency exit
    • Tempered safety glass in case of breakage
    • Roof-mounted warning lights/turn signals for road transport — two front and two rear 

    SiriusXM is a trademark of Sirius XM Radio Inc.  iPod is a trademark of Apple Incorporated.

    ComfortCab includes rollover protection for the operator
    1585 Front Mower 1585 Front Mower

    The ComfortCab includes rollover protective structure (ROPS) protection for the operator. A retractable seat belt is included as standard equipment.

  • Welded frame structure is made of high-strength steel
    High-strength, tubular steel frame High-strength, tubular steel frame

    The revolutionary tubular, high-strength welded steel frame provides durability and allows major components to be located lower in the machine:

    • The design results in a lower center of gravity for better stability and traction on hillsides and slopes.
    • Rollover protective structures (ROPS) are integral members of the frame.
    Durable design

    Durability features of the frame include:

    • Heat-treated cast-iron axles with 1.24-in. (3.15-cm) kingpins
    • Internal wet-disk brakes
    • Hydraulic PTO clutch, with brake
      • Provides smooth engagement and long life
    • Hydrostatic oil cooler
    • O-ring seal (ORS) hydraulic fittings
    • Integrated, shaft-driven power take-off (PTO)
    • Sealed relays and electrical connectors
    • Heavy-duty, dual hydraulic cylinders
    • Nodular cast-iron lift arm sockets
    • Cast-iron rear bumper
  • Two-function mechanical rear-wheel drive for optimum use of the four-wheel drive feature
    Mechanical rear-wheel drive axle Mechanical rear-wheel drive axle

    Mechanical rear-wheel drive is available as standard equipment (1575, 1580, 1585) or as a factory-installed option (1550, 1570):

    • On-demand four-wheel drive automatically engages and disengages as needed.
      • Constantly maximizes trimming ability
      • Offers better fuel economy than full-time four-wheel drive 
      • Provides better steering tire wear than full-time four-wheel drive 
      • Increases traction and trimming ability to allow a novice operator to mow like an expert
      • Works in the forward direction only
    • Full-time four-wheel drive is on at all times.
      • Can be engaged or disengaged on the go
      • Provides maximum traction and flotation in poor conditions
      • Works in reverse as well as the forward direction
    • Two-wheel drive position is available on 1580 and 1585 with two-speed transaxle.
      • Disengages rear axle when transporting at high ground speeds
  • Front mower ballast requirements

    Front mowers must be properly ballasted for both good performance and safe operation. Ballast requirements differ depending on the front mower model and the implement being used.

    The chart below gives the minimum ballast requirements for the various product configurations. Additional ballast is recommended for operating on slopes or other conditions that may warrant it.

    NOTE: Use only implements and accessories recommended by the manufacturer.

     Front mowers and current (model year 2015 and later) implements

    TerrainCut™ 1500 Series Front Mowers
    Product Configuration 60-in. (152-cm)
    Side-Discharge Deck (7-Iron™ PRO)
     
    72-in. (183-cm)
    Side-Discharge Deck (7-Iron PRO)
    62-in. (157-cm)
    Rear-Discharge
    Mower Deck
    72-in. (183-cm)
    Rear-Discharge Mower Deck
    72-in. (183-cm) 7-Iron V-Flex Deck 60-in. (152-cm) HD Front Blade 47-in. (119-cm) HD Two-Stage Snow Blower 60-in. (152-cm) HD Two-Stage Snow Blower  60-in. (152-cm) Rotary Broom 43-in. (109-cm) Drop Spreader (Order Zone)
    1550 Front Mower 2WD 1* 2* 1* 2* NA*** 0 2* 3* 1* NA***
    1550 Front Mower 4WD 0 1* 0 1* NA*** 0 2* 2* 0 Wide track
    1570 Front Mower 2WD 1* 2* 1* 2* 6* 0 2* 3* 1* NA***
    1570 Front Mower 4WD 0 1* 0 1* 6* 0 2* 2* 0 Wide track
    1575 Front Mower Narrow track + 4 * Wide track + 5* Narrow track + 1 wheel weight
    on each side**
    + 3 weights* 
    or wide track
    + 3 weights*
    Wide track + 6* Wide track + 6* 1* NA*** 6* Wide track + 1 wheel weight on each side** + 3 weights* With 60-in. Rotary Broom: wide track + 2 wheel weight on each side**
    or
    with 60-in. Snow Blower: wide track
    1580 Front Mower 0 1* 0 1* 6* 0 NA*** 2* 0 Wide track
    1585 Front Mower Narrow track + 4* Wide track + 5* Narrow track + 1 wheel weight
    on each side**
    + 3 weights* 
    or wide track
    + 3 weights*
    Wide track + 6* Wide track + 6* 1* NA*** 6* Wide track + 1 wheel weight on each side** + 3 weights* With 60-in. Rotary Broom: wide track + 2 wheel weight on each side**
    or
    with 60-in. Snow Blower: wide track
    1400 and 1500 Series II Front Mowers
    1420 Series II Front Mower   2*  1* 4*   NA*** 6*   4*  6* 6*  NA*** 
    1435 Series II Front Mower  2*  1*  4*  NA*** 6*   4*  6* 6*  NA*** 
    1445 Series II Front Mower  2*  1*  4*  6* 6*   4*  6* 6*  NA*** 
    1545 Series II Front Mower  2*  1* 4*   6*  6*  NA***  6* 6*  NA*** 
    1565 Series II Front Mower 0  2*  1*  4*  6* 6*   NA***  6*  6* NA***
    1575/1585 Cab models: Rim design allows for tire assembly to be mounted in two different configurations, a narrow track or wide track width to meet ballast requirements.
    *42-lb (19-kg) (R66949) Quik-Tatch weight (installation requires TCB10303, rear weight mounting kit).
    **50-lb (23-kg) front wheel weight(s) required (installation requires BM17985, mounting hardware kit).
    ***NA - Not recommended for use on front mower.
    NOTE: Ballast requirements may change. Always refer to the implement owner's manual for the appropriate ballast requirements. 

     Front mowers and model year 2014 and prior implements

    1400 and 1500 Series II Front Mowers
    Product Configuration 60-in. (152-cm) Side-Discharge Deck (7-Iron™ and
    7-Iron II)
      
    72-in. (183-cm) Side-Discharge Deck (7-Iron and 7-Iron II) 62-in. (157-cm) Rear-Discharge
    Mower Deck
    72-in. (183-cm) Rear-Discharge
    Mower Deck
    72-in. (183-cm)7-Iron V-Flex Deck MCS 600 Hydraulic Dump Soft
    cab
    Hard cab 60-in. (152-cm) HD Front Blade 47-in. (119-cm) HD Two-Stage
    Snow Blower
    60-in. (152-cm) HD Two-Stage
    Snow Blower
    60-in. (152-cm) Rotary Broom
    1420 Series II Front Mower 0 1* 0 1* NA 0 0 0 6* 4* 6* 6*
    1435 Series II Front Mower 0 1* 0 1* NA 0 0 0 6* 4* 6* 6*
    1445 Series II Front Mower 0 1* 0 1* 3* 0 0 0 6* 4* 6* 6*
    1545 Series II Front Mower NA 1* NA 1* 3* 0 0 0 6* NA 6* 6*
    1565 Series II Front Mower NA 1* NA 1* 3* 0 0 0 6* NA 6* 6*
    1500 TerrainCut Front Mowers
    1550 Front Mower 2WD 1* 2* 1* 2* NA NA NA NA 0 2* 3* 1*
    1550 Front Mower 4WD 1* 0 1* NA NA NA NA 0 2* 2* 0
    1570 Front Mower 2WD 1*  2* 1* 2* 6* NA NA NA 0 2* 3* 1*
    1570 Front Mower 4WD 1* 0 1* 6* NA NA NA 0 2* 2* 0
    1575 Front Mower Narrow track + 4* Wide track + 5* Narrow track 1 wheel weight on each side**
    + 3 weights* or wide track + 3 weights*
    Wide track + 6* Wide track + 6* NA NA NA 1*   NA  6* Wide track 1 wheel weight on each side** + 3 weights*
    1580 Front Mower 0 1* 0 1* 6* NA NA NA 0 NA 2* 0
    1585 Front Mower Narrow track + 4* Wide track + 5* Narrow track 1 wheel weight on each side**
    + 3 weights* or wide track + 3 weights*
    Wide track + 6* Wide track + 6* NA NA NA 1* NA 6* Wide track 1 wheel weight on each side** + 3 weights*
    1575/1585 Cab models: Rim design allows for tire assembly to be mounted in two different configurations, a narrow track or wide track width, to meet ballast requirements.
    * 42-lb (19-kg) (R66949) Quik-Tatch weight (requires TCB10303, rear weight mounting kit).
    ** 50-lb (23-kg) front wheel weight(s) required (installation requires BM17985, mounting hardware kit).
    NA - Not recommended for use on front mower.
    NOTE: Ballast requirements may change. Always refer to the implement owner's manual for the appropriate ballast requirements.  

     

  • Easy-to-operate controls maximize productivity
    1585 Front Mower ComfortCab 1585 Front Mower ComfortCab
    1585 Front Mower and rotary broom with optional mirrors and radio 1585 Front Mower and rotary broom with optional mirrors and radio

    Hydrostatic power steering provides the following benefits:

    • Makes it easy to turn the unit, for less operator fatigue
    • Allows quick turns – two turns lock to lock – for excellent productivity

    The steering console offers the following:

    • Throttle
    • Key switch
    • Headlight switch
    Operator controls Operator controls
    Controls conveniently located Controls conveniently located

    Heads-up indicator lights are always visible to the operator for easy monitoring.

     

    Console information/warning lights include the following:

    • Hourmeter
    • Engine oil pressure
    • Engine coolant temperature
    • Hydraulic oil over temperature light and alarm PTO shutdown
    • Air preheater
    • Power take-off (PTO) operation indication
    • T4 display

    Maneuverability:

    • Turn radius of 13 in. (33 cm)
    • Uncut circle of 28 in. (71.1 cm) with a 72-in. (183-cm) 7-Iron™ PRO mower deck
    • Deck offset and pulled rearward
    • Tail-follows-the-trail trimming capability with 72-in. (183-cm) side-discharge mower deck
      • Steered wheels (tail) stay within the path (trail) cut by the mower deck, allowing maneuverability without the rear of the machine contacting mowing obstacles
    Master stop brake/directional foot pedals Master stop brake/directional foot pedals

    Two-pedal foot control:

    • Allows operator to select speed and direction with just the touch of a toe
    • Keeps both hands free for steering and operating controls

     

    Master stop brake (parking brake):

    • Provides stopping power to both drive wheels
    • Disengages the power take-off (PTO)
    • Disengages the optional cruise control
    • Used also for a parking brake
    Individual turn-assist brakes and differential lock Individual turn-assist brakes and differential lock

    Individual turn-assist brakes:

    • Provides additional traction when operating on hillsides
    • Ideal for tight trimming situations
    • Work in conjunction with hydrostatic foot controls to stop or slow the unit for turns

    Differential lock:

    • Locks both of the front drive wheels together for added traction
    • Easily engaged with the left foot
    Four-wheel-drive (4WD) lever Four-wheel-drive (4WD) lever
    Control levers Control levers

    Two-speed transaxle shift lever is standard on 1580 and 1585.

     

    4WD control lever is standard on 1575, 1580, and 1585; factory-installed option on 1550 and 1570.

    Safety starting system helps protect the operator and others
    1550 mowing grass 1550 mowing grass
    1550 mowing grass 1550 mowing grass

    TerrainCut™ Front Mowers have an operator-presence system.

    To start the engine the following conditions must be met:

    • Master brake must be depressed or the parking brake locked; the hydrostatic foot controls will then be in the neutral position.
    • PTO must be disengaged
    • Ignition key must be used.

    In addition, once the engine is running, an interlock automatically shuts the engine and PTO off if the operator leaves the seat. To keep the engine running, the operator must disengage the PTO and set the parking brake before dismounting.

    Tilt steering and headlights are standard equipment to reduce cost
    Three-piece steering column Three-piece steering column

    The three-piece steering column provides the following:

    • Easy access to the steering valve and electrical components
    • Better fit-up and appearance
    • Easy adjustment to accommodate all operators
    • Standard 50-W halogen headlights
    Tilt steering
    Tilt steering column Tilt steering column

    Tilt steering column allows the operator to adjust to the most comfortable position:

    • Allows additional clearance for platform entry and exit
    • Over 15 in. (38.1 cm) of travel
    • Works in conjunction with the seat to accommodate all operators, regardless of size
    Brakes and differential lock are convenient to use for maximum productivity
    Wet-disk brakes/differential lock Wet-disk brakes/differential lock

    Wet-disk brakes are standard equipment:

    • Provide positive stopping power and long life
    • Require minimal adjustment
    • Individual turn brakes are located on left side of platform

    The differential lock is also included as standard equipment:

    • Locks both front drive wheels together for extra traction, when needed
    • Conveniently located pedal to allow the operator to engage the differential lock with the left foot while maintaining speed and direction (forward or reverse) with the right foot
    12-V power outlet is convenient to use
    12-V power outlet 12-V power outlet

    The 12-V power outlet can be used to recharge radios and cell phones, popular tools used by commercial cutters.

    The outlet is conveniently located under the front of the seat.

    Certification ensures compliance with safety standards
    Rollover protective structure (ROPS) Rollover protective structure (ROPS)

    TerrainCut™ Front Mowers comply with ANSI B71.4 2004 safety certification specification.

    Rollover protective structure (ROPS) complies with the U.S. Occupational Safety and Health Administration (OSHA) 1928.51 standard for rollover protection.

  • Serviceability is designed-in to reduce maintenance cost and increase uptime
    Engine hood
    Large screened area of engine hood Large screened area of engine hood
    Hood latch Hood latch

    Engine hood includes large screened area:

    • Minimizes the amount of material that can get to the cooling radiators
    • Minimizes the need to clean the hood screens 

    Hood latch keeps the hood securely in place, providing an optimum seal:

    • A single hood latch is located on top of the hood behind the seat.
    Engine hood opens to the rear Engine hood opens to the rear
    Designed-in service accessibility Designed-in service accessibility

    Designed-in service accessibility helps ensure daily maintenance is completed to keep the machine operating at peak performance.

     

    The hood opens rearward, exposing the following:

    • Engine
    • Oil and fuel filter
    • Hydraulic oil cooler
    • Radiator check/fill

    The hood can be totally removed, if necessary. The seat flips forward for access to air filter, fuse bank, engine oil dipstick, and front of engine.

    Condenser release knob Condenser release knob
    Condenser tilted back to permit cleaning Condenser tilted back to permit cleaning

    Easy-to-turn knobs are provided to release the air conditioning condenser (1575 and 1585 only) and fuel and hydraulic oil coolers so they can be tilted back to permit thorough cleaning between them and the engine coolant radiator.

    Foot platform access panel
    Removable foot platform Removable foot platform
    #

    The panel on the foot platform can be removed for access to the transaxle, PTO shaft, and most linkages.

     

    Easy-to-read daily service decal is located on the bottom of the foot platform panel:

    • Provides access to easily hook up driveshaft when changing implements
    • Makes it more likely service will be performed at the optimum time, thus ensuring the highest level of performance and uptime
    Panel on foot platform removed Panel on foot platform removed
    #

    Removal of the foot platform gives convenient access to the driveshaft that powers the mower deck, snow blower and rotary broom:

    • Helps make changing from one front implement to another easier and more convenient

     Hydraulic hoses have reusable O-ring seal (ORS) fittings:

    • ORS fittings seal at a lower torque to prevent leaks.
    • Fittings can be removed from a damaged hose and installed on another hose.
    • Downtime and cost for repairs are reduced considerably.
    Rotate For Service™ (RFS) feature shown Rotate For Service™ (RFS) feature shown
    RFS service lockout latch RFS service lockout latch

    RFS feature provides access for cleaning and maintenance of the mower decks:

    • The service-latch pin allows mower deck to lock into position to ensure deck is held in position for cleaning or service.
    • The top-greaseable spindle grease fittings can be accessed without removing the belt covers. 
    Trailering features are included to reduce the time and cost to move equipment
    1550 TerrainCut™ Front Mower 1550 TerrainCut™ Front Mower
    1570 Front Mower with deck raised 1570 Front Mower with deck raised

    Trailering features are designed-in for convenience:

    • Designed-in trailer tie-downs are located at the front and rear of the machine.
    • 26-degree deck lift will clear the steepest trailer ramps for easy loading and unloading.
    • Rotate For Service™ (RFS) decks take up less room when transporting on trailers, allowing more room for other important equipment.
    Mower deck shown in RFS position Mower deck shown in RFS position
  • Tail-follows-the-trail design helps avoid obstacles in turns
    Tail follows the trail
    1550 Front Mower with 60-in. (152-cm) mower deck 1550 Front Mower with 60-in. (152-cm) mower deck
    1550 Front Mower with 72-in. (183-cm) mower deck 1550 Front Mower with 72-in. (183-cm) mower deck

    Tail-follows-the-trail trimming with 72-in. (183-cm) mower decks. Steered wheels (tail) stay within the path (trail) cut by the mower deck, allowing maneuverability without the rear of the machine contacting mowing obstacles.

    Maneuverability:

    • Turn radius - 13 in. (33 cm)
    • Uncut circle - 28 in. (71cm) with a 72-in. (183-cm) PRO mower deck
      • Deck offset for increased trim capability
  • Diesel engine has high-quality features to minimize operating cost
    Hood open for access to engine Hood open for access to engine
    3-cylinder, liquid-cooled diesel engine 3-cylinder, liquid-cooled diesel engine

    The 1500 Series TerrainCut Front Mowers are powered by liquid-cooled, 3-cylinder diesel engines.

    These engines feature low levels of exhaust and emissions, reduced noise levels, and excellent fuel economy. They also meet the necessary Environmental Protection Agency (EPA) Tier 4 emissions requirements.

    Models 1570, 1575, 1580, and 1585 are biodiesel compatible from the factory up to B20. Model 1550 requires an optional kit to be compatible with B20 biodiesel fuel.

    Engine drawing for 1570, 1575, 1580, 1585 shown Engine drawing for 1570, 1575, 1580, 1585 shown
      1550 1570, 1575, 1580, 1585
    Fuel Diesel (optional kit permits B20 compatibility) Diesel (B20 compatible)
    Power    
         Gross at maximum rpm 24.2 hp (17.8 kW), PS 37.4 hp (27.5 kW), PS
         Net --- ---
    Displacement 77 cu in. (1.262 L) 100.2 cu in. (1.642 L)
    Maximum torque --- ---

    Key features of the engine include:

    • Economical cast-in block cylinder design for good cooling and long life
    • Indirect fuel injection (model 1550)
    • Direct fuel injection (model 1570, 1575, 1580, 1585) 
      • Injects fuel directly on top of pistons for more efficient combustion
      • Delivers more horsepower per gallon of fuel
      • Improves starting
      • Develops more horsepower per gallon of fuel; improves starting
    • Aluminum alloy pistons with built-in steel struts are lightweight to reduce connection rod bearing loads and provide good heat transfer characteristics
    • Design permits tighter tolerances and neutralizes expansion of the piston, thereby reducing blow-by gas and noise from the piston slap
    • Higher top rings on the piston and a thinner head gasket greatly reduce the volume of unburned waste gases and increase combustion efficiency
    • Timing gears and injector drive gears utilize helical profile gears to help lower engine noise; gear teeth have a newly designed roll-off profile, giving almost no clash, no noise, and no backlash
    • Fuel filter with replaceable element
    • Full-pressure intake manifold provides quick starts in temperatures down to 0°F (-18°C). (Optional engine coolant heater attachment will assist starting under more extreme conditions.)
    • Auto-bleed fuel system; there is no need to prime the system if the tractor runs out of fuel; the system will self-prime the injection pump, lines and injectors, providing fast fuel recovery
    • Key start and shutoff eliminates fuel shut-off knob; electric solenoid shuts fuel supply off immediately when key is turned off
    • See-through coolant recovery tank permits operator to check coolant level without removing radiator cap
    • Enclosed engine compartment to keep out debris and lower sound levels
    • Sealed radiator compartment to keep trash and debris on outside of hood
    • Excellent torque for plenty of lugging power when operating in tough mowing conditions
    • Full-pressure lubrication for positive lubrication, even when operating on slopes
    • Dual-element, dry-type, replaceable air cleaner completely sealed for effective cleaning
      • 90 percent to 95 percent of dirt ejected before it reaches the paper element
    • Secondary safety element for additional filtering
    • Progressive-type air restriction indicator to let operator know when the filter needs servicing
    • Automotive-type alternator for plenty of charge to the battery and power for accessories 
      • 75 amp for open-station models
      • 95 amp for ComfortCab models
    • Automatic initiation of air heater for easier cold-weather starting
    • Automotive-sensing system tells operator when engine is ready to start
    Rear-mounted radiators
    Rear-mounted radiators (1550, 1570, 1580) Rear-mounted radiators (1550, 1570, 1580)
    Rear-mounted radiators and air conditioner condenser (1575, 1585) Rear-mounted radiators and air conditioner condenser (1575, 1585)
    Fuel tank is large capacity with convenient gauge for maximum uptime
    Fuel tank Fuel tank
    Fuel gauge (shown on 1585 model) Fuel gauge (shown on 1585 model)

    Fuel tank features include:

    • 16-U.S. gal. (60.6-L) capacity provides a 10-hour run time.
    • Top draw provides clean fuel.
    • Fuel indicator is conveniently located.
  • Hydrostatic transmission and transaxle are heavy-duty to maximize uptime
    Kanzaki 30-cc transmission Kanzaki 30-cc transmission

    A Kanzaki® 30-cc transmission is used for reliable operation.

     

    Durability features include the following:

    • High-capacity hydrostatic transmission and heavy-duty transaxle maximize performance and uptime and minimize cost of maintenance. 
    • Charge pump is used to efficiently deliver oil to the transmission.
    • Oil cooler helps maintain optimum transmission oil temperature for superior performance and longer transmission life in the most challenging operating conditions.
    • Maximum forward top speed is 12 mph (19.3 km/h) on the 1550, 1570, and 1575 and 15 mph (24.1 km/h) on the 1580 and 1585.
    • Self-bleeding design helps keep air out of the system.

    Kanzaki is a trademark of Kanzaki Kokyukoki Manufacturing Company.

  • Mower decks for TerrainCut™ Front Mowers match a wide variety of needs

    Since 1998 the John Deere 7-Iron™ mower deck has demonstrated commercial quality, performance, and durability. The 7-Iron PRO, Fastback™, and V-Flex mower decks deliver an even higher-quality cut in even more diverse conditions.

    1580 Front Mower 1580 Front Mower
    1585 Front Mower 1585 Front Mower
    #

    TerrainCut Commercial Mower Compatibility

     

    Mower Deck  1550 1570 1575 1580 1585
    60-in. (152-cm) 7-Iron PRO Side-Discharge Mower Deck X X X* X* X*
    62-in. (157-cm) Fastback Rear-Discharge Mower Deck X X X X X
    72-in. (183-cm) 7-Iron PRO Side-Discharge Mower Deck X X X X X
    72-in. (183-cm) Fastback Rear-Discharge Mower Deck X X X X X
    72-in. (183-cm) 7-Iron V-Flex Side Discharge Mower Deck   X X X X

    Rear weights (R66949) are required based on machine configuration. Must also order TCB10303, rear weight mounting bracket.

    *Mower deck offset for trimming capability. Vehicle track width is 2 in. (5.1 cm) wider on the discharge side of deck. This may cause the tire to drive over uncut grass on discharge side of deck.

    NOTE: These mower decks will not retrofit to F900 Series or F1145 Front Mowers.

    Rotate for Service (RFS™)
    Mower deck showing RFS feature Mower deck showing RFS feature

    Rotate for Service (RFS) feature provides access for cleaning and maintenance of the mower decks:

    • The rotation angle will vary depending on deck size and power unit tire size.
    • No tools are required to access belts.
    • The underside of the mower deck is easy to access.
    • Easy on/off design simplifies installing and removing mower decks.
    • Top, greaseable spindles can be accessed without removing belt covers.

    The Rotate for Service position also reduces the length of the machine for trailering.

    Certification

    TerrainCut Front Mowers comply with ANSI B71.4 safety certification.

    Heavy-duty blade spindles
    Cast-iron spindle housing Cast-iron spindle housing
    Cast-iron spindle housing Cast-iron spindle housing

    The mower spindle housings are made of ductile cast iron, except for the 72-in. (183-cm) 7-Iron V-Flex Side-Discharge Mower Deck, which has an aluminum center spindle housing and cast-iron gearboxes to drive the outer blades.

    Key benefits of ductile cast-iron spindle housings:

    • Ductile cast-iron material provides superior impact strength.
    • Gusseted design puts reinforcement where it is needed.
    • Strength of cast iron protects against damage from blade impacts.
    • Grease fitting is mounted at the top for easy access.
    • Grease pressure-relief valve minimizes seal damage from overfilling with grease and keeps debris from entering housing.
    • The 8-in. (20.3-cm) diameter housing distributes loads and impacts to minimize deck-shell damage.
    • Spindle allows ability to be rebuilt.

    NOTE: The 72-in. (183-cm) 7-Iron V-Flex Side-Discharge Mower Deck has an aluminum center spindle housing. The outside blades are driven by cast-iron gearboxes.

    60-in. (152-cm) 7-Iron PRO Side-Discharge Mower Deck
    60-in. 7-Iron PRO Mower Deck 60-in. 7-Iron PRO Mower Deck
    60-in. 7-Iron PRO Mower Deck 60-in. 7-Iron PRO Mower Deck

    Features include:

    • Blade tip speed of 18,000 fpm (5486 m/min) for more blade strikes per inch mowed.
    • Redesigned front baffle manages airflow and controls clippings better.
    • Blade spindle housings are made of ductile cast iron
      • Gusseted design puts reinforcement where it is needed.
    • Spindle pocket reinforcement gives even greater structural durability.
    • Adjustable anti-scalp wheels help smooth out the mowing job.
    • Standard semi-pneumatic caster tires will not go flat from punctures.

    The mower is designed to provide exceptional cut quality at higher travel speeds:

    • The mower deck is stamped from 7-gauge, 0.179-in. (4.6-mm) steel to minimize the number of welds and provide a smooth underside, with fewer sharp corners, for reduced material buildup.
      • Provides precision components and long deck life
      • Single piece of steel means no welds to break
      • Provides a smooth underside, without corners, reducing material buildup
    • 0.75-in. (1.9-cm) solid steel bar is welded to mower deck perimeter for added strength.
    • The rounded corners of the stamped deck help distribute impact stress to reduce the potential of damage when the mower contacts trees, rocks, curbs, and other fixed obstacles.
    • A deep-deck design of 5.5-in. (14-cm) delivers excellent airflow so material can be processed quickly and efficiently.
    • 1-in. to 6-in. (2.5-cm to 12.7-cm) cutting heights, in 0.5-in. (1.3-cm) increments, allow the operator to match all mowing conditions.

    Unique baffling system allows grass to stand up before being cut, producing a uniform length and appearance:

    • Baffling system eliminates clumping, blowout, and windrowing.
    • Wide discharge opening provides even clipping dispersal for an excellent, finished appearance in all conditions.
    62-in. (157-cm) Fastback Mower Deck
    62-in. Fastback Mower Deck 62-in. Fastback Mower Deck
    #

    The 62-in. (157-cm) Fastback rear-discharge mower is ideally suited for:

    • Areas where people are present
      • Schools
      • Parks
      • Playgrounds
      • Traffic areas (city boulevards, roadsides, etc.)
    • Conditions and applications:
      •  Areas with long grass and weeds
      • Areas where customer is not as concerned about having a wide dispersal of grass (park areas, roadsides, etc.)
    • Government bids that specify a rear discharge mower. 

    Key features of the 62-in. (157-cm) Rear-Discharge Mower Deck include: 

    • Mower deck is constructed of 7-gauge, 0.179-in. (4.6-mm) steel for the strength to stand up to the demanding use of commercial and municipal mowing applications.
    • Blade spindle housings are made of ductile cast iron.
      • Gusseted design puts reinforcement where it is needed.
    • Deck is constructed with a patented baffling system that reduces clumping and windrowing and
      produces a finished appearance that competitive rear-discharge mowers cannot match.
    • The belt-drive system has an easy-to-adjust tension device.
      • By using a spring system, the risk for over tensioning is eliminated, ensuring a long belt life and excellent performance during the season.
    • For easy service and maintenance, the deck can be rotated into the vertical locked service position.
    • Deep-deck design increases airflow so more material can be processed.
    • Operator can trim with either side.
      • Dual side trimming increases operator productivity.
    • 1-in. to 6-in. (2.5-cm to 15.2-cm) cutting heights, in 0.5-in. (1.3-cm) increments, allow the operator to match all mowing conditions.
    • Gauge wheels, rollers, or side-mounted skid shoes lift the deck over uneven surfaces for a well-groomed appearance.
    • Double-captured anti-scalp wheels provide increased durability.

    • Easy lift and lock system for service purposes.

    • Standard semi-pneumatic caster tires will not go flat when punctured.

    • Spindles can be greased without removing belt shields.
    • 1-in. (2.5-cm) cold-forged spindles are strong for long life.
      • Heat-treated to provide additional strength
    • Certified to European (CE) standards
    72-in. (152-cm) 7-Iron PRO Side-Discharge Mower Deck
    72-in. 7-Iron Pro Side-Discharge Mower Deck 72-in. 7-Iron Pro Side-Discharge Mower Deck

    Features include:

    • Blade tip speed of 18,000 fpm (5486 m/min) for more blade strikes per inch mowed.
    • Redesigned front baffle manages airflow and controls clippings better.
    • Spindle pocket reinforcement gives even greater structural durability.
    • Blade spindle housings are made of ductile cast iron.
      • Gusseted design puts reinforcement where it is needed.
    • Adjustable anti-scalp wheels help smooth out the mowing job.
    • Standard semi-pneumatic caster tires will not go flat from punctures.

    The mower is designed to provide exceptional cut quality at higher travel speeds:

    • The mower deck is stamped from 7-gague, 0.179-in. (4.6-mm) steel to minimize the number of welds and provide a smooth underside, with fewer sharp corners, for reduced material buildup.
      • Provides precision components and long deck life
      • Single piece of steel means no welds to break
      • Provides a smooth underside, without corners, reducing material buildup
    • 0.75-in. (1.9-cm) solid steel bar is welded to mower deck perimeter for added strength.
    • The rounded corners of the stamped deck help distribute impact stress to reduce the potential of damage when the mower contacts trees, rocks, curbs, and other fixed obstacles.
    • A deep-deck design of 5.5-in. (14-cm) delivers excellent airflow so material can be processed quickly and efficiently.
    • 1-in. to 6-in. (2.5-cm to 12.7-cm) cutting heights, in 0.5-in. (1.3-cm) increments, allow the operator to match all mowing conditions.

    Unique baffling system allows grass to stand up before being cut, producing a uniform length and appearance:

    • Baffling system eliminates clumping, blowout, and windrowing.
    • Wide discharge opening provides even clipping dispersal for an excellent, finished appearance in all conditions.
    72-in. (183-cm) 7-Iron V-Flex Commercial Side Discharge Mower Deck
    72-in. 7-Iron V-Flex Deck 72-in. 7-Iron V-Flex Deck

    The 72-in. (183-cm) 7-Iron V-Flex Mower Deck is suitable for those who need a rotary deck capable of following the undulations and mounding in rough or uneven areas: 

    • Golf courses
    • Sports facilities
    • Parks and recreation facilities
    • Municipalities 

    The V-Flex deck is constructed of 7-gauge, 0.179-in. (4.6-mm) steel:

    • Added strength to stand up to the demanding uses on the golf course. 

    The deck has a patented vertical belt drive system, which allows for the deck to articulate 20 degrees above and below center. This design also allows for belts to stay clean and prevents the belt from stretching and twisting when flexing.

    Mower deck specifications

     

      60-in. (152-cm) 7-Iron PRO Side-Discharge 62-in. (157-cm) Fastback Rear-Discharge 72-in. (183-cm) 7-Iron PRO Side-Discharge 72-in. (183-cm) Fastback Rear-Discharge 72-in. (183-cm) 7-Iron V-Flex Side-Discharge
    Gauge (thickness) 7 gauge, 0.179 in. (4.6 mm) 7 gauge, 0.179 in. (4.6 mm) 7 gauge, 0.179 in. (4.6 mm) 7 gauge, 0.179 in. (4.6 mm) 7 gauge, 0.179 in. (4.6 mm)
    Cutting height 1 to 6 in.  (2.5 to 15.2 cm) 1 to 6 in.  (2.5 to 15.2 cm) 1 to 6 in.  (2.5 to 15.2 cm) 1 to 6 in.  (2.5 to 15.2 cm) 1 to 6 in.  (2.5 to 15.2 cm)
    Caster wheel type Semi-pneumatic Semi-pneumatic Semi-pneumatic Semi-pneumatic Pneumatic
    Gauge wheels Yes, front and rear Yes, front and rear Yes, front and rear Yes, front and rear Yes, front and rear
    Deck oscillation relative to ground plane +/- 15 degrees +/- 15 degrees +/- 15 degrees +/- 15 degrees +/- 15 degrees
    Lateral deck tilt +/- 8 degrees +/- 8 degrees +/- 8 degrees +/- 8 degrees +/- 8 degrees
    Deck installed at factory No No No No No
    Time required for one person to install or remove deck (without tools) 10 minutes 10 minutes 10 minutes 10 minutes 10 minutes
    Time to change height of cut 3 minutes without tools 3 minutes without tools 3 minutes without tools 3 minutes without tools 3 minutes without tools
    Belt type Kevlar belt Kevlar belt Kevlar belt Kevlar belt Kevlar belt
    Belt shield type Plastic Plastic Plastic Plastic Plastic
    Belt shield time to remove or install 2 minutes or less 2 minutes or less 2 minutes or less 2 minutes or less 2 minutes or less
    Blade type High lift Medium lift High lift Medium lift High lift
    Blade tip speed 18,000 fpm (5,486 m/min) 16,000 fpm (4,877 m/min) 18,000 fpm (5,486 m/min) 16,000 fpm (4,877 m/min) 16,800 fpm (5,122 m/min)
    Spindles 3 3 3 3 3
    Spindle-housing material Ductile cast iron Ductile cast iron Ductile cast iron Ductile cast iron Center - aluminum, outside - cast-iron gearbox
    Deck level laterally when raised Yes Yes Yes Yes Yes
    Discharge Side Rear Side Rear Side
    Mowing width 60 in. (152 cm) 62 in. (157 cm) 72 in. (183 cm) 72 in. (183 cm) 72 in. (183 cm)
    Overall width (chute down) 74 in. (188 cm) 64 in. (163 cm) 86 in. (218 cm) 74 in. (188 cm) 86 in. (218 cm)
    Weight --- --- --- --- ---
    PTO shaft drive is easy to access for quick-change of equipment
    Front mower PTO shaft drive Front mower PTO shaft drive

    Live, independent power take-off (PTO) powers a mower deck, rotary broom, or two-stage snow blower:

    • PTO can be engaged or disengaged on the go for greater productivity.
    • Hydraulic PTO clutch has delay relief valve for soft engagement.
    • Wet clutch design provides long life.
    • PTO is easily accessible.
    Tires are matched to the machine size and mower widths
    1550, 1570, 1575 tires
    Tires Tires

    Standard drive tires:

    • 23x10.5-12 or 23x8.5-12 (1550, 1570)
    • 23x10.5-12 (1575)

    Available steering tires: 18x8.5-10 (4WD) or 18x8.5-8 (2WD)

    1580, 1585 tires

    Standard drive tires: 26x12-12, 6 PR drive tires (1580, 1585)

    Standard steering tires: 20x10.00-10, 6 PR steering tires (1580, 1585)

    Optional mulching kits add versatility to the mower decks
    Typical mulch kit shown Typical mulch kit shown

    Kits are available to convert the 60-in. (152-cm) and 72-in. (183-cm) 7-Iron™ PRO Side-Discharge Mower Decks into mulching decks for use in grass and leaves.

    The mulch kits include mulching blades, baffles, end covers, and attaching hardware.

    72-in. (183-cm) Fastback Mower Deck
    72-in.  Fastback Mower Deck 72-in. Fastback Mower Deck

    The 72-in. (183-cm) rear-discharge mower deck is ideally suited for:

    • Areas where people are present
      • Schools
      • Parks
      • Playgrounds
      • Traffic areas (city boulevards, roadsides, etc.)
    • Conditions and applications:
      • Areas with long grass and weeds
      • Areas where customer is not as concerned about having a wide dispersal of grass (park areas, roadsides, etc.)
    • Government bids that specify a rear discharge mower.

    Key features of the 72-in. (183-cm) Rear-Discharge Mower Deck include:

    • Mower deck is constructed of 7-gauge, 0.179-in. (4.6-mm) steel for the strength to stand up to the demanding use of commercial and municipal mowing applications.
    • Blade spindle housings are made of ductile cast iron.
      • Gusseted design puts reinforcement where it is needed.
    • Deck is constructed with a patented baffling system that reduces clumping and windrowing and
      produces a finished appearance that competitive rear-discharge mowers cannot match.
    • The belt-drive system has an easy-to-adjust tension device.
      • By using a spring system, the risk for over tensioning is eliminated, ensuring a long belt life and excellent performance during the season.
    • For easy service and maintenance, the deck can be rotated into the vertical locked service position.
    • Deep-deck design increases airflow so more material can be processed.
    • Operator can trim with either side.
      • Dual side trimming increases operator productivity.
    • 1-in. to 6-in. (2.5-cm to 15.2-cm) cutting heights, in 0.5-in. (1.3-cm) increments, allow the operator to match all mowing conditions.
    • Gauge wheels, rollers, or side-mounted skid shoes lift the deck over uneven surfaces for a well-groomed appearance.
    • Double-captured anti-scalp wheels provide increased durability.

    • Easy lift and lock system for service purposes.

    • Standard semi-pneumatic caster tires will not go flat when punctured.

    • Spindles can be greased without removing belt shields.
    • 1-in. (2.5-cm) cold-forged spindles are strong for long life.
      • Heat-treated to provide additional strength
    • Certified to European (CE) standards

Brakes

Type Internal wet disk
Individual turn brakes Standard
Master brake Standard, locking