Specifications

Blades

Length Varies by deck size
Thickness 0.25 in.
0.64 cm
Number Three
Blade tip speed Approximately 18,000 fpm<br/>5,486 m/min

Brakes

Dynamic braking Twin levers
Park brake Internal wet disk integrated in the transmission
Park brake actuation Hand brake

Buyer's note

Warranty 36 months or 1200 hours, whichever comes first<br/>First 24 months, no hour limitation

Dimensions

Length 84 in.
213 cm
Width With chute down, 62, 68, 74 in.
157, 173, 188 cm
Height With ROPS up, 73 in.
185 cm
With ROPS down, 47 in.
119 cm
Weight 1,220 to 1,283 lb
553 to 582 kg

Drivetrain

Wheel motors Tuff Torq heavy-duty integrated piston wheel motor
Speed and direction control Twin levers
Hydraulic capacity 5.9 U.S. qt
5.6 L
Filter Internal, replaceable
Transmission Hydrostatic
Travel speed <br/>Forward<br/>0-10 mph<br/>0-16.1 km/h<br/>Reverse<br/>0-4.5 mph<br/>0-7.2 km/h<br/>

Electrical system

Charge system 20 amp
Battery voltage 12 V
Cold cranking amp 300 amp
Hour meter Standard, digital
Operator presence starting system Brake-N-Go (hand)

Engine

Displacement 44.3 cu in.
726 cc
Cylinders Two
Crankcase capacity With filter, 2 U.S. qt
1.9 L
Oil filter Full flow, replaceable
Lubrication Full pressure
Cooling Air
Air cleaner Pre-cleaner
Yes
Heavy-duty canister type with safety element
Power Gross at 3,600 rpm: 23.5 hp<br/>17.5 kW
Manufacturer/Model FX730V

Fuel system

Fuel type Gasoline
Fuel consumption Under normal conditions, load, operation, and dependent on loads and operating conditions 1.1-1.9 U.S. gal./hr
4.2-7.2 L/hr
Fuel tank capacity 11.5 U.S. gal.
43.5 L
Fuel tank switch/shut-off valve Yes

Key Specs

Engine Manufacturer/model FX730V
Drive wheels 24x9.5-12 (48 in.), 24x12-12 (54 in., 60 in.)
Blade tip speed Approximately 18,000 fpm<br/>5,486 m/min
Caster wheels 13x6.5-6
Engine Power Gross at 3,600 rpm: 23.5 hp<br/>17.5 kW
Fuel tank capacity 11.5 U.S. gal.<br/>43.5 L
Warranty 36 months or 1200 hours, whichever comes first<br/>First 24 months, no hour limitation
Mower deck Size 48, 54, 60 in.<br/>122, 137, 152 cm
Transmission Hydrostatic
Speed range 0-10 mph<br/>0-16.1 km/h

Mower decks

Deck construction 7-Iron PRO, one-piece stamped steel with reinforcements
Deck thickness 7 gauge
0.18 in.
4.6 mm
Discharge Side, MOD
Height-of-cut range Increments
0.25 in.
0.64 cm
1-5.5 in.
2.54-14 cm
Cutting width 48, 54, 60 in.
122, 137, 152 cm
Size 48, 54, 60 in.<br/>122, 137, 152 cm

PTO

Type Electro-magnetic, 200 lb-ft
271 Nm
Drive V-belt

Tires

Load rating 4 PR
Drive wheels 24x9.5-12 (48 in.), 24x12-12 (54 in., 60 in.)

Wheels

Caster wheel type Flat free
Front anti-scalp rollers RH, center, LH
Rear anti-scalp rollers Optional
Caster wheels 13x6.5-6

Additional information

Date collected 07-Jun-2017