Specifications

3-point hitch

Lift capacity, 24-in. behind link arms 997.9 kg
2200 lb
Type Category 1

Cab

Compliance Complies with OSHA, SAE, and CSA standards for roll-over protection
Visibility 360 degree (angle)
Doors Two
Noise rating 80 dBA
Seat equipment Scissor-link

Dimensions

Wheelbase 172.7 cm
68 in.
Front axle clearance 31 cm
12.2 in.
Turning radius with brakes 2.7 m
8.8 ft
Turning radius without brakes 2.8 m
9.2 ft
Approximate shipping weight (open-station; cab) Rollover protective structure (ROPS) - 1315.4 kg
2900 lb
Cab - 1619.3 kg
3570 lb

Electrical

Battery size 500 CCA
Alternator (12-V) 75 amp
Starter size 1.4 kW
1.9 hp

Engine

Family FYDXL1.57TDA
EYDXL1.57TDA
GYDXL1.57TDA
Manufacturer Yanmar
Engine model 3TNV86CT-MJT
Engine power (gross) 28.5 kW
38.8 hp
Power take-off (PTO) power Gear four-wheel drive (4WD) - 23.6 kW
31.6 hp
Hydrostatic transmission (HST) 4WD - 23.2 kW
31.1 hp
Rated engine speed 2600 rpm
Type Diesel
Injection pump type High pressure common rail direct injection
Aspiration Turbocharged
Emissions compliance Final Tier 4
Cylinders/displacement 3 / 1.57 L
3 / 95.7 cu in.
Number of cylinders Three
Cylinder liners Cast-in-block
Bore and stroke 86 x 90 mm
3.4 x 3.54 in.
Compression ratio 19.1:1
Lubrication Pressurized
Cooling system Water pump
Air cleaner Dry-type, two-stage dual element
Engine torque at rated speed 105 Nm
77.4 lb-ft
Fuel tank capacity Rollover protective structure (ROPS): 51.1 L
13.5 U.S. gal.
Cab: 44.7 L
11.8 U.S. gal.

Final drive

Type Bull Gear

Fluid capacities

Crankcase with filter 4.8 L
5.1 qt
Transmission and hydraulic system 23.8 L
6.3 U.S. gal.

Fuel system

Type High pressure common rail direct injection
Fuel consumption 9.1 L/hr
2.4 gph

Hydraulics

Pump rated output Steering
22.3 L/min
5.9 gpmImplement
32.5 L/min
8.6 gpm
54.5 L/min
14.4 gpm
Pump type Dual gear
Maximum operating pressure 172.4 bar
2500 psi
Draft control sensing Position control
Remote control valves available Up to four rear remotes

Key Specs

Approximate shipping weight (open-station; cab) Rollover protective structure (ROPS) - 1315.4 kg<br/>2900 lb<br/>Cab - 1619.3 kg<br/>3570 lb
Power take-off (PTO) power 31.1 hp
Steering hydraulics 22.3 L/min<br/>5.9 gpm
Implement hydraulics 32.5 L/min<br/>8.6 gpm
Hitch type Category 1
Lift capacity, 24-in. behind link arms 997.9 kg<br/>2200 lb
Engine power (gross) Gear four-wheel drive (4WD) - 23.6 kW<br/>31.6 hp<br/>Hydrostatic transmission (HST) 4WD - 23.2 kW
Standard transmission; forward/reverse Gear 4WD / eHydro (electronic hydrostatic)
Cruise control Standard
Wheelbase 172.7 cm<br/>68 in.

Operator station

Rollover protective structure Type
Foldable
Yes
Platform - flat/straddle Flat
Gear shift location - console/floor Left-hand side

Power take-off (PTO)

Standard Rear - 540 rpm
Optional Mid - 2100 rpm
Control Position control
Clutch Wet disc
Brake (for mid and rear PTO) Wet disc

Tires

Front Farm - 7-14
Turf (Gear 4WD) - 27x8.50-15
Turf (HST 4WD) - 25x10.5LLx15
R4 - 25x8.5-14
Front tread range 114 cm
44.9 in.
Rear tread spacing 103.1 cm
40.6 in.
Rear Farm - 11.2-24<br/>Turf - 41x14-20 or 41x18LL-16.1<br/>R4 - 15-19.5

Transmission

Standard transmission; forward/reverse Gear 4WD / eHydro (electronic hydrostatic)
Left-hand reverser Yes
Transmission gear ranges 12F/12R PowrReverser (PRT)
Infinitely variable - 3 range
Final drive Bull Gear
Brakes Multi-plate wet disc
Steering Hydrostatic power steering
Clutch, wet/dry Wet
Axle capacity Front
720-1450 kg
1587-3197 lbRear
2400 kg
5292 lb
Creeper SpeedMatch optional
Cruise control Standard