3-point hitch

Lift capacity, 24-in. behind link arms 998 kg
2200 lb
Type Category 1


Compliance Complies with OSHA, SAE, and CSA standards for roll-over protection
Visibility 360 degree (angle)
Doors Two
Noise rating 80 dBA


Wheelbase 172.7 cm
68 in.
Front axle clearance 31 cm
12.2 in.
Turning radius with brakes 2.7 m
8.8 ft
Approximate shipping weight (open-station; cab) ROPS: 1315.4 kg
2900 lb
Cab: 1619.3 kg
3570 lb


Battery size 500 CCA
Alternator (12-V) 75 amp
Starter size 1.4 kW
1.9 hp


Family EYDXL1.64NDA
Manufacturer Yanmar
Engine model 3TNV88C-MJT
Engine power (gross) 23.7 kW
32.2 hp
Power take-off (PTO) power Gear 4WD (four-wheel drive) - 18.5 kW
24.8 hp
Hydrostatic transmission (HST) 4WD - 18.1 kW
24.3 hp
Rated engine speed 2600 rpm
Type Diesel
Injection pump type High pressure common rail direct injection
Aspiration Natural
Emissions compliance Final Tier 4
Cylinders/displacement 3 / 1.64 L
3 / 100 cu in.
Number of cylinders Three
Cylinder liners Cast-in-block
Bore and stroke 88x90 mm
3.46x3.54 in.
Compression ratio 19.1:1
Lubrication Pressurized
Cooling system Water pump
Air cleaner Dual element with electronic restriction indicator
Engine torque at rated speed 87 Nm
64.2 lb-ft
Fuel tank capacity Rollover protective structure (ROPS): 51.1 L
13.5 U.S. gal.
Cab: 44.7 L
11.8 U.S. gal.

Final drive

Type Bull Gear

Fluid capacities

Crankcase with filter 4.8 L
5.1 qt
Transmission and hydraulic system 23.8 L
6.3 U.S. gal.

Fuel system

Type High pressure common rail direct injection
Fuel consumption 7.6 L/hr
2.0 U.S. gal.


Type Open center
Pump rated output Steering
22.3 L/min
5.9 gpmImplement
32.5 L/min
8.6 gpm
54.5 L/min
14.4 gpm
Pump type Dual gear
Maximum operating pressure 172.4 bar
2500 psi
Draft control sensing Position control
Remote control valves available Up to four rear remotes

Key Specs

Steering hydraulics 22.3 L/min<br/>5.9 gpm
Implement hydraulics 32.5 L/min<br/>8.6 gpm
Engine power (gross) 23.7 kW<br/>32.2 hp
Hitch type Category 1
Standard transmission; forward/reverse Gear 4WD / eHydro (electronic hydrostatic)
Approximate shipping weight (open-station; cab) OPS: 1315.4 kg<br/>2900 lb<br/>Cab: 1619.3 kg<br/>3570 lb
Cruise control Standard
Power take-off (PTO) power Gear 4WD (four-wheel drive) - 18.5 kW<br/>24.8 hp<br/>Hydrostatic transmission (HST) 4WD - 18.1 kW<br/>24.3 hp
Lift capacity, 24-in. behind link arms 998 kg<br/>2200 lb
Wheelbase 172.7 cm<br/>68 in.

Operator station

Rollover protective structure Type
Platform - flat/straddle Flat
Gear shift location - console/floor Left-hand side

Power take-off (PTO)

Standard Independent Rear - 540 rpm
Optional Mid - 2100 rpm
Control Position control
Clutch Wet disc
Brake (for mid and rear PTO) Multi-plate wet disc


Front Farm - 7-14
Turf (Gear 4WD) - 27x8.50-15
Turf (HST 4WD) - 25x10.5LLx15
R4 - 25x8.5-14
Rear Farm - 11.2-24
Turf (Gear 4WD) - 41x14-20
Turf (HST 4WD) - 41x18LL-16.1
R4 - 15-19.5
Front tread range 114 cm
44.9 in.
Rear tread spacing 103.1 cm
40.6 in.


Standard transmission; forward/reverse Gear 4WD / eHydro (electronic hydrostatic)
Left-hand reverser Yes
Transmission gear ranges 12F/12R PowrReverser (PRT)
3-range, infinitely variable
Final drive Bull Gear
Brakes Multi-plate wet disc
Steering Hydrostatic power steering
Clutch, wet/dry Wet disc
Axle capacity Front
720-1450 kg
1587-3197 lbRear
2400 kg
5292 lb
Creeper SpeedMatch optional
Cruise control Standard
Differential lock Yes