The 54-in. (138-cm) Accel Deep Mower Deck is a stamped-steel, deep, flat-top design that delivers excellent cut quality, productivity, cleanliness, durability, and versatility. Optimal performance and dispersion of clippings is provided, even at faster mowing speeds:
4.5-in. (11.4-cm) deep throughout the entire deck shell for optimum mowing, mulching, and bagging performance
Optional MulchControl™ attachment provides superior mulching performance and versatility.
Stamped-steel design eliminates sharp edges and corners where material can build up and diminish mowing performance
Mower deck is suspended from the vehicle for a smooth and level cut
Adjustable mower wheels, positioned just above ground level, help smooth out the mowing job
Excellent cut quality
54A Mower top (similar mower from X500 Series Tractor shown)
54A Mower underside (similar mower from X500 Series Tractor shown)
Deep mower-deck stamping gives excellent cut quality. It allows the cut and suspended material room to exit the deck without getting recut:
Reducing the amount of recutting enables more power to be used to cut incoming grass, which greatly improves mower capacity.
Helps maintain excellent cut quality at faster mowing speeds
Clean flow of material out of discharge area prevents cut material from interfering with cutting the incoming grass, making it possible for the blades to cut incoming material cleanly.
Even in mulching mode, cut evenness is improved compared to other designs because the additional depth allows for continuous circulation, optimal recutting, and an even distribution of clippings.
Productivity - getting the job done fast
Right side of Accel Deep 54A Mower Deck
Deep mower-deck stamping gives high productivity, which gets the job done fast. It allows the cut and suspended material room to exit the deck quickly, reducing the amount of re-cutting so more power is available to process incoming grass:
Greatly improves mowers capacity to maintain excellent mowing performance in difficult mowing conditions and at higher speeds
Large discharge opening is both high and wide to handle more material:
Gives a smooth, even discharge of clippings at all mowing speeds
Reduces the chance of plugging, especially important when operating in wet, thick, or dense grass and when bagging
Cleanliness - for the mower and the operator
Accel Deep 54A Mower Deck
The flat-top shape of the deck stamping is optimal for keeping itself and the operator clean:
There are few places to catch and hold material on top and underneath the deck.
Top of deck stays cleaner, reducing time and effort needed for cleaning and service
Underside of deck is self-cleaning to maintain optimum performance without buildup of material to interfere with the flow of air and clippings
Less need to clean and remove build-up of material from underside deck
The depth of the Accel Deep Mower Deck minimizes the amount of material that escapes from the front of the deck
Limited amount of material to drift onto the operator and mower deck
Even for material discharged out the chute, less re-cutting results in larger pieces that are less likely to end up on the operator
Mulching prevents the discharge of material completely and the MulchControl attachment makes mulching a practical solution for most mowing situations.
Cleaning a mower deck, both top and bottom, is one of the most frequent maintenance activities:
The flat-top design reduces places for material to build up and makes material that does collect easy to remove.
MulchControl option
The MulchControl attachment for the 54A Mower Deck makes mulching more practical for many mowing situations because it not only does an excellent job of mulching but it also allows the mower to be easily converted for times when it is more desirable to side discharge or collect the lawn material. Advantages of mulching grass clippings include:
A beautiful looking lawn
Grass clippings not blown onto the operator, driveways, or flower beds
Less fertilizer use
Elimination of the effort needed to dispose of clippings
Mower wash port
Mower wash port with hose connector
A wash port is provided to make cleaning the underside of the mower deck easy.
Hose connector is included with the mower deck.
Superior durability is designed in
Spindle pocket
Mower wheels are double captured
The 54A Mower Deck has strong spindle pockets, to keep the blades aligned, even after years of tough service:
Ribs in the deck shell add strength where it is needed.
Mower wheels are double captured:
Provides greater strength and durability for longer, trouble-free life.
Single-bolt adjustment makes setting wheels to the correct height for the cutting height quick and easy.
Low-tension belt-drive design reduces the side load on engine lower bearings and mower deck bearings for longer life.
The 54A Mower Deck features a 5/8-in. (16-mm) diameter solid-steel rod side bumper that provides extra strength and protection.
Dual-stage E-coat and powder-paint coatings provide extra protection from rust.
Versatility - easy to change between side discharge, mulch, and bagging modes
The 54A Mower is designed for maximum versatility, providing the greatest ease in changing from one mower discharge mode to another:
With the optional MulchControl attachment installed (along with the special mulching blades), changing from side discharge to mulching or vice versa is done with the simple flip of a lever.
How MulchControl works
MulchControl baffle open
MulchControl baffle closed
MulchControl is an innovative, simple design that is easy to use and maintain:
The MulchControl attachment includes baffles to control the flow of material under the deck.
The MulchControl baffle, or divider, between the left and middle spindles is about halfway down. The height is designed to balance the mulching and side-discharge modes.
When the MulchControl baffle is open, the divider between the left and middle spindles passes a portion of the material to the discharge opening, along with the material from the middle and right spindle areas.
When the MulchControl baffle is closed, the material stays within the deck and gets chopped into mulch and deposited in the turf.
MulchControl baffle closed
MulchControl handle
The MulchControl handle is located on top of the mower deck and used to open and close the discharge baffle.
The operator is required to get off of the machine in order to engage or disengage mulch mode.
Changing from mulching to side discharge or vice versa takes only a few seconds.
MulchControl is well-suited to the following mowing situations:
Usually mulch, but side discharge when grass gets too long
Usually side-discharge, but would like to be able to close the chute to control clippings
Always mulch a main lawn, but often side discharge secondary lawns
Bag clippings, but want to go farther before emptying bags
MulchControl puts the operator in control of the clippings. Now the operator can have all the benefits of mulching with the ability to easily change to side discharge or bagging when needed.
While in the side-discharge mode, MulchControl will still mulch about one third of the material. Therefore, the side-discharge mode is essentially a partial-mulch mode. This can be an advantage when side discharging or bagging, as it helps to reduce the amount of material being discharged. Other times this could work as a disadvantage:
When cutting strong southern grasses, such as Zoysia and Bermuda
When cutting in wet, high-growth conditions, such as those found in the Pacific Northwest United States
When optimum bagging and lawn clean-up is desired
NOTE: A rear bagger is not available for the ZTrak Z375R.
The Z365R and Z375R have full-featured engines with extended life series (ELS) features that are engineered to deliver world-class endurance and power. A step above the competition, it is designed to be more dependable and longer lasting, saving time and money over the long run. They are built to exceed demanding needs by incorporating premium features and innovative designs:
Overhead valve (OHV) design for cooler operation and longer valve life
Contains an advanced debris management system that directs cooling air through the rotating screen to the air cleaner compartment, where large debris is pre-filtered through ejector slots
Keeps unfiltered air out of the engine through a large, dual-sealed, premium oval-shaped cartridge-style filter
Ensures maximum protection for extended engine life with the premium air cleaner, a pleated paper filter with a foam precleaner
Captures fine particles for maximum protection and extended maintenance
Provides maximum protection with full-pressure lubrication system
Pumps oil by a mechanical gerotor-style pump to all critical engine components
Enhances the system through a premium automotive-style spin-on oil filter, which removes over 95 percent of oil contaminates
A premium bearing package for improved durability; includes a super-finished crank pin bearing with a 50 percent smoother surface to increase load capacity by 35 percent
Uses a premium DU Teflon®-coated bearing
Helps resist wear and increases durability through self-lubricating bronze bearing
Wear-resistant chrome-plated valve stems for long-life valves
44 percent smoother for longer life
Cast-iron cylinder sleeve for extended life
Dependable float-feed type carburetor with integral fuel pump
High-capacity fuel filter for dependable operation
Maintenance-free electronic ignition for quick, dependable starts
Platinum spark plugs for extended life
Teflon is a trademark of E.I. du Pont de Nemours and Company or its affiliates.
The motion-control levers can be adjusted to two height settings and nine fore-aft settings for a total of 18 different positions:
Increased operator comfort
Adjustable for more precise control of the machine
Shock absorber for motion-control levers
Cut-height pin doubles as tracking adjustment tool
A standard shock absorber for the motion-control levers makes maneuvering ZTrak™ Mowers easy and comfortable:
Shock absorber modulates the movement of control levers for smoother operation.
Operator can smoothly and precisely control the machine.
On-board tracking adjustment from the operator seat is quick and easy. The cut-height pin includes a 13-mm wrench and doubles as a convenient tool for adjusting tracking and the motion-control lever position.
Control panel
Control panel (Z335E shown)
Low fuel warning light illuminated
The operator control panel is conveniently located and easy to use. The following instruments and controls are included:
Hour meter
Low fuel warning light
Ignition switch
Power take-off (PTO) control
Engine speed/choke control
A choke position is built into the engine speed control.
Park brake
Park brake
The park brake is conveniently located:
Large lever is easy to use.
Lever is color-coded for easy identification.
Park brake effectively holds the machine in the parked position.
Park brake must be engaged (in the upper position) to start the engine.
Once the engine is started, the park brake must be disengaged before operating the motion-control levers.
Mower deck lift/cut-height adjustment
Mower deck lift/cut-height adjustment in place
Mower deck cutting height adjusts from 1 in. (2.5 cm) to 4 in. (10.2 cm) in 0.25-in. (0.64-cm) increments for excellent cut quality and performance.
Mower deck adjustment has built-in memory so the operator can easily return to the desired cutting height after raising the deck.
Foot pedal on Z375R
Foot pedal on Z345R
The Z345R, Z355R, Z365R, and Z375R include a foot-lift pedal along with the hand-lift lever to make raising the mower deck easier. The foot-lift pedal also provides a convenient way to temporarily raise the mower deck over an obstruction while mowing.
Heavy-duty power take-off (PTO) clutch
PTO clutch
The PTO clutch is designed to operate through many on/off cycles.
CAUTION: Children or bystanders may be injured by rotating blades. Before traveling forward or rearward:
Carefully check the area around the machine.
Disengage the mower before backing up.
NOTE: Operating the mower while backing up is strongly discouraged.
Interlock switches
Switch senses if hopper is installed
A switch senses if the hopper is installed. If the hopper is not installed and the PTO switch is actuated, the PTO will not operate.
A brake interlock switch is provided so the tractor will not start unless the brake is depressed or the parking brake set.
A tractor seat switch will turn off the PTO if the operator leaves the tractor seat; it will also shut-down the engine if the park brake is not set and the operator leaves the seat.
Either the operator needs to be in the seat or the hopper or deflector installed for the engine to run.
Steering is easy with large diameter front caster wheels
Motion-control levers shown on Z335E
Shock absorber dampens movement of control levers
Motion-control levers are designed for comfortable and easy operation.
A shock absorber is included to dampen the movement of the control levers so any operator can make smooth, controlled turns.
Front caster wheel (Z335E)
Front caster wheel (Z365R)
Pneumatic caster wheels give a smoother ride and easier steering:
Large diameter front caster wheels provide extra ride comfort and better steering control.
Caster wheels have sealed bearings for long life and easy steering.
Tires are sized for the size and weight of the vehicle.
ZTrak™ model
Caster wheel tire size
Z335E, Z345M, Z345R
11x4.0-5
Z355E, Z355R, Z365R, Z375R
13x5.0-6
Controls are designed to promote safe operation
Park brake (Z365R shown)
Motion-control levers (Z365R shown)
Park brake must be engaged for the engine to crank.
Motion-control levers must be in the outward position for the engine to crank.
Premium control levers on the Z345R, Z355R, Z365R, and Z375R are painted green and have a unique shape and size for more comfortable operation.
Park brake must be disengaged before operating the motion-control levers or the engine will stall.
Interlock switch is located under the seat (Z365R shown)
Seat interlock switch disengages the mower when the operator leaves the seat.
Engine will stall if the operator leaves the seat without the motion-control levers in the outward position and the park brake set.
The operator station is designed for operator comfort and convenience when operating all controls:
Excellent visibility forward and to the trim side of the deck makes operation easy and comfortable for the operator.
Controls are color coded for easy identification.
Low-fuel warning light is easily visible in daylight.
Twin-lever controls adjust, using cut-height pin/socket, for convenience and operator comfort.
A shock absorber dampens motion control lever movement to give smooth operation.
Comfortable seat
Comfortable seat (Z345R shown)
Comfortable seats make the operator experience more pleasant. Armrests included on the Z345R, Z355R, and Z375R seat can be flipped up out of the way, if desired:
Z345R, Z355R, and Z375R – 18-in. (46-cm) high seat back with adjustable armrests
Seat suspension
Seat suspension springs
Making seat fore-aft adjustment (Z335E pictured) the Z375R has a seat slide lever
Two steel coil suspension springs under the seat absorb shocks when traveling over rougher areas to provide a smoother ride.
The seat has a 2.5-in. (6.35-cm) fore-aft adjustment. The cut-height pin/socket can be used to loosen the bolts in order to make seat adjustments.
Cup holder and storage compartments
Cup holder
The cup holder is designed to hold two common cup sizes securely.
Storage compartment with cover located under seat
Open storage on left side of vehicle
Open storage on left side of vehicle
Covered storage under the seat and open storage along the left side of the vehicle provide safe and secure places for the operator to keep safety equipment, a cell phone, etc.
Operator foot platform
Comfortable operator's platform
Large foot platform helps the operator remain comfortable and secure:
Volcano grips give a secure grip.
Raised footrests at the front of the platform provide a comfortable area for the operator's feet.
ZTrak Mowers are designed around a heavy-duty formed and welded steel frame for strength and reliability.
Large front caster wheels and large rear drive wheels provide several operator benefits:
Smoother ride
Better slope performance
More operator comfort over uneven ground
Better traction
The operator platform is roomy and uncluttered for maximum comfort, and the controls are convenient to use:
Easy to get on and off the mower
Ample legroom for comfortable operation
Adjustable motion-control levers for height and position, enabling the operator to stay comfortable while using them
Color-coded and logically placed controls
Styling is both functional and attractive
ZTrak Z335E
The styling of ZTrak Mowers is functional and attractive to appeal to residential owners who value product appearance and the easy, comfortable operation that comes with thoughtful control designs:
Color-coded controls are not only attractive, but easy to find and use.
Large foot platform, surrounded by frame rails, has a safe and inviting appearance and provides easy access for the operator.
Contoured shape of the fenders provides improved visibility to the drive tires, minimizes storage space required, and adds to the stylish appearance of the vehicle.
Heavy-duty welded steel frame for reliability and long life
Heavy-duty frame tubing
ZTrak mower frame
The ZTrak frame includes 1- x 1.5-in. (2.5- x 3.8-cm) steel tubing for long-term durability:
Heavy-duty frame tubing provides a solid support.
Reinforced frame offers additional strength where needed.
Loosening bolt to remove platform for access to mower deck
Footrest opens for access to mower deck
The footrest area is easily removed, utilizing the on-board tool, for access to the mower deck.
A V-twin engine with 44.2-cu in. (724-cc) displacement provides plenty of power and torque to handle tough mulching, mowing, and bagging conditions:
V-twin cylinder design for greater torque, lower vibration, and improved sound quality
Engine model M44 ELS
Electronic ignition for fast starts
Cast-iron sleeves for longer engine life
Overhead valves for excellent power and fuel economy
Spin-on oil filter with pressure lubrication for keeping the oil cleaner for long engine life and extended time between oil changes; pressure lubrication is also more effective when operating the tractor on an incline
Easy access to the no-tools oil drain valve for oil changes
Rear engine guard for protecting the engine and providing additional strength and integrity
Dual transmissions efficiently power the ZTrak™ mower forward and reverse and give steering capability:
Transmissions are set low in the vehicle for excellent hillside stability.
Hydro-Gear® transmissions are reliable and durable.
Beefed-up 1-in. (2.5-cm) axles for greater strength
Maintenance-free unitized transmissions are sealed and have no hose connections to leak hydraulic fluid.
Hydro-Gear EZT transmission
Tow-valve control (left side shown)
Four-bolt hubs provide a reliable and convenient wheel-mounting system.
Tow-valve controls are provided for each transmission and located above the vehicle frame on either side of the engine:
Easy to reach and use
Allow the vehicle to be moved without the engine running
Hydro-Gear is a trademark of Hydro-Gear, a joint venture of Sauer-Danfoss and Agri-Fab. Sauer-Danfoss is a trademark of Sauer-Danfoss Incorporated. Agri-Fab is a trademark of Agri-Fab Incorporated.
Buyer's notes
U.S. warranty
2 year or 120 hour bumper-to-bumper* (*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.)
Note 2
Flip-up foot platform for easy service access
Note 3
18-position adjustable motion-control levers
Note 1
Mower wash port makes cleaning the deck easier
Chassis
Front caster bearings
Sealed ball bearings
Cup holder
Yes
Storage compartment
Yes
Frame
Heavy-duty frame tubing
Front caster tires
13x5-6
Primer/paint
E-coat/powder
Hourmeter
Yes
Service interval decal
Yes
Drive tires
20x9-10
Dimensions
Height
40.1 in. 101.9 cm
Overall length
72.2 in. 183.5 cm
Wheelbase
47.5 in. 121 cm
Width with mower
68.8 in. 174.8 cm
Weight
With mower and fuel, 590 lb 268 kg
Width with mower (deflector raised for storage)
59.7 in. 151.6 cm
Width without mower
44 in. 111.9 cm
Drive train
Dual hydros
Hydro-Gear EZT with 1-in. (2.5-cm) axles
Engine
Type
Overhead valve
Fuel gauge
Low-fuel light
Battery
12 V 300 CCA
Lubrication
Full pressure with replaceable filter, capacity, 2 U.S. qt 1.9 L
Fuel tank capacity
2.1 U.S. gal. 8 L
Cooling method
Air
Cylinders
V-twin
Power
25 hp 18.6 kW
Displacement
44.2 cu in. 724 cc
Model number
M44 Extended Life Series (ELS)
Choke/speed control
Single lever
Key Specs
Engine power
25 hp 18.6 kW
Engine model number
M44 Extended Life Series (ELS)
Width of cut
Accel Deep™ mower deck, 54 in. 137 cm
Forward speed
0-7 mph 0-11.3 km/h
Mulching system
Optional MulchControl™ attachment
U.S. warranty
year or 120 hour bumper-to-bumper* (*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.)
Drive tires
20x9-10
Front caster tires
13x5-6
Seat back height
Medium back with armrests, 18 in. 45.7 cm
Lift system
Type
Hand lever and foot lift
Preset cut height
Yes
Mower cut height
1-4 in. 2.5-10.2 cm
Cut height increments
0.25 in. 0.64 cm
Mower deck
Mower deck material
10 gauge 0.135 in. 3.4 mm
Type
Side discharge
Width of cut
Accel Deep™ mower deck, 54 in. 137 cm
Mower drive system
V-belt
Operation
Park brake interlock
Yes
Operator video
Yes
Operator presence system
Yes
Slope operating limit
13 degrees
Rollover protective structure (ROPS)
No
Optional attachments
Mulching system
Optional MulchControl™ attachment
Rubber floor mat
Standard
Material collection system
Not available
Storage cover
Yes
Sun shade
Yes
Light kit
Dual headlight kit
Mounted sprayer
Not available
PTO
Type
Electric, 105 lb-ft 142.4 Nm
Drive
V-belt
Seat
Fore-aft adjustment
While seated, 2.5 in. 6.35 cm
Seat back height
Medium back with armrests, 18 in. 45.7 cm
Seat suspension
Two springs
Travel speed
Forward speed
0-7 mph 0-11.3 km/h
Speed and direction control
Twin premium levers
Reverse speed
0-3.5 mph 0-5.6 km/h
Control adjustment
2-height/9-fore-aft, 18 positions
Additional information
Date collected
27-Aug-2020
3.8
5 Reviews
3.8
4.2
4.0
Aug 09, 2018
Bad company to deal with!
1/5
On July 21, 2018, I place an online order through the John Deere web site for a new Z375R 54A. New being implied by the Web site promotional material and my intent to purchase a new mower. New meaning for all practical purposes, (something recently built). A mower was delivered by a local John Deere dealer. The delivery guy was gone before I had a chance to have a good look at the mower or the paper work. After a little investigation I found that the mower was manufactured in late 2016 for distribution in 2017 where it sat at some dealership out in sunlight and weather for over a year. This meant that the battery is almost two years old and that the tires and plastics have been UV deteriorating for over a year. I tried to get the John Deere dealership and/or the John Deere Company to deliverer to me what I paid for (a new 2018 Z375R 54A mower). The response I got in summary was an in your face response, (too bad, your stuck with what you got. You shouldn’t have trusted us). I’m sure John Deere will censor my review, but that’s OK because I’m going to post it all over the internet.
Johndoe944
From: Zachary, LA.
1
1
1
Jun 09, 2018
Best upgrade
5/5
I have a 155 c that is 12 years old and still runs great, I have 3 ac. And was usually spending 3 hours cutting, 1 st time out cut whole yard in just over a hour. And that is learning how to use a zero turn for the first time! This thing cut thick and overgrown in one pass at twice the speed of my older mower. The 155 c usually needed two passes for the thick stuff, I was really impressed with this mower. Hopefully this Deere will be just as reliable as my old one. Would highly recommend this mower.
NJAmowing
From: Greenville, SC, USA
Usage Frequency: Weekly
Level of Experience: Intermediate
Yes, I would reccomend this product
5
5
5
May 19, 2018
Great beginner's mower
4/5
This is my first zero turn mower and I have had my Z375R for a year now. I mow 1.5 acres. I started out mowing by side discharge and loved the cut quality and overall feel of the mower's operation. After a few cuts of the lawn, I decided to have the mulching kit put on. Mistake. The mower went from a smooth, fun mowing experience to almost loathing getting on the mower. I mowed with the mulching kit on last year from May-Nov. The mulch kit did a great job if you mowed at about a walking pace. Any faster and you would be forced to re-cut to get rid of the clippings lines. This year, I took the mulch kit off and I am back loving my mower again. Some other gripes besides the mulch kit... The low fuel light is pretty much useless. As stated in another review, it would be better to have a gauge. The only time I've noticed the light is when the engine shuts off and I look down to find out why. Also, I gave a 4/5 for Ease of Use because the mower never starts up on the first crank. In cooler weather, I have to stand behind the engine and hold the choke lever while turning the key to get the engine to start. Not sure if I would recommend the mower to anyone. If you're looking for mowers, I would definitely request a demo of some other models.
BPbp
From: Columbus, OH, USA
Usage Frequency: Weekly
Level of Experience: Intermediate
Yes, I would reccomend this product
4
5
4
Mar 02, 2017
Good Mower for Small Acreage/Home Use
4/5
Traded in my older 20hp/42inch deck John Deere for this 25hp/54 inch deck unit and so far it cuts nice and clean on both manicured grass and slightly heavier, taller grass outside my fence on County property. Only two small complaints.
(1) No visual window or gauge for the gas tank level. I fill the tank at every use so I have not seen the low gas light come on yet. Anyway, while mowing who looks down and to the right enough to notice a small light. Wish there was a gauge like every other riding mower I have owned.
(2) The grease fitting on the idler pulley on the mower deck is near impossible to get to even with the deck all the way down and with a flexible hose on a grease gun. One has to force the hose at a sharp angle
To get the grease gun tip on the fitting and with my arthritis it is near impossible. I plan to find a 90 degree tip next time I go to the local farm store to see if that will help.
All in all though a good unit so far with no problems.