Specifications

Capacities

Fuel tank 764 L
202 U.S. gal.
Transmission-hydraulic system 180 L
47.5 U.S. gal.
Cooling system

40.3 L
10.6 U.S. gal.
Crankcase oil volume 25 L
6.8 U.S. gal.
Diesel exhaust fluid (DEF) tank 31.3 L
8.3 U.S. gal.

Drawbar

Drawbar category Standard: Category 4
Optional: Category 4 with heavy-duty support
Maximum vertical load Standard: 2245 kg
4950 lb
Optional (dependent on drawbar position): 4990 kg
11,000 lb

Electrical system

Type of bulb in headlight (Halogen, Zenon, LED)
Standard: halogen, 65 W
Available: LED
Battery options 12 V
Alternator size Standard: 200 amp
Optional: 330 amp
Working lights Standard: 18 halogen
Available: 18 LED
22 LED
Total cold cranking amps 1,850 CCA
Type of bulb in beacon (Halogen, Zenon, LED)

Engine performance

PTO torque rise 40 percent
Maximum engine power ECE-R120: 299 kW
407 hp
Engine peak torque At 1600 rpm: 1732 Nm
1277 lb-ft
Power boost 10 percent
Rated power ECE-R120: 272 kW
370 hp
Rated PTO power (hp SAE) 231 kW
310 hp

Engine specifications

Aspiration Dual turbochargers, variable geometry turbo with fixed geometry turbo in series; air-to-air aftercooling and cooled exhaust gas recirculation
Emission level Final Tier 4
Engine family JJDXL09.0308
After treatment type Diesel oxidation catalyst (DOC)/diesel particulate filter (DPF)/selective catalytic reduction (SCR)
Rated speed 2100 rpm
Cylinders liners Wet-sleeve
Description John Deere PowerTech™ PSS 9.0 L (B20 diesel compatible)
Displacement 9 L
549 cu in.
Engine type Diesel, in-line, 6-cylinder, wet-sleeve cylinder liners with four valves in head

Hydraulic system

Number of rear selective control valves (SCVs) Standard: 1.3-cm (1/2-in.) ISO couplers: 4
Optional: 1.3-cm (1/2-in.) ISO couplers: 5 and 6 available
1.9-cm (3/4-in.) ISO coupler: 1
SCV control Electronic
Type Closed-center, pressure/flow compensated system with load sensing
Pump rated output Standard: 85-cc pump: 227.1 L/min
60 gpm
Optional: 85-cc plus 35-cc dual pump: 321 L/min
85 gpm
Available flow at a single rear SCV 1.3-cm (1/2-in.) couplers: 132 L/min
35 gpm
1.9-cm (3/4-in.) coupler: 159 L/min
42 gpm

Key Specs

Rated PTO power (hp SAE) 231 kW
310 hp
Engine description John Deere PowerTech™ PSS 9.0 L (B20 diesel compatible)
Rated engine power ECE-R120: 272 kW
370 hp
Rear hitch category (SAE designation) Standard: Category 4N/3 at 610 mm (24 in.) behind hitchpoint: 6,803 kg
15,000 lb
Optional: Category 4N/3 at 610 mm (24 in.) behind hitchpoint: 9,072 kg
20,000 lb
Base machine weight e23, 63.5-cm (25-in.) tracks: 15,600 kg
34,400 lb
Hydraulic pump rated output Standard: 85-cc pump: 227.1 L/min
60 gpm
Optional: 85-cc plus 35-cc dual pump: 321 L/min
85 gpm
Maximum engine power ECE-R120: 299 kW
407 hp
Transmission type Standard: e23™ PowerShift™ with Efficiency Manager™ 40K, 40 km/h (24.9 mph)
Optional: John Deere AutoPowr™ IVT™ 40K, 0.05-42 km/h (0.03-26 mph)
Engine displacement 9 L
549 cu in.

Miscellaneous

Country of manufacture USA

Operator station

Cab suspension Standard: four-post cab suspension
Seat Degree of seat swivel, left hand
25 degree (angle)
Degree of seat swivel, right hand
40 degree (angle)
Standard: air suspension
Cab glass area 6.52 m2
70.18 sq ft
Display Standard: Generation 4 4100 CommandCenter™ with 17.8-cm (7-in.) display
Optional: Generation 4 4600 CommandCenter with 25.4-cm (10-in.) display
Radio Standard: AM/FM stereo with weatherband, remote controls, auxiliary input jack, four speakers and external antenna
Inner cab volume 3.24 m3
114 cu ft
Rollover protective structure, OOS

Instructional seat Standard

Precision AG

Guidance Integrated AutoTrac™
Telematic Available with JDLink™ hardware, activations, and Ethernet harnesses (availability dependent upon destination)
Remote diagnostics Available with activated JDLink hardware and activations

Rear axle

Final drive type Inboard planetary three pinion

Rear hitch

Sensing type Electrohydraulic
Hitch category (SAE designation) Standard: Category 4N/3 at 610 mm (24 in.) behind hitchpoint: 6,803 kg
15,000 lb
Optional: Category 4N/3 at 610 mm (24 in.) behind hitchpoint: 9,072 kg
20,000 lb
Maximum lift capacity behind lift points Standard (at 610-mm [24-in.] behind hitch point): 12,124 kg
26,729 lb

Rear power take-off (PTO)

Type Independent
Standard: 44 mm (1.75 in.) 20-spline, 1,000 rpm
Engine rpm (at rated PTO speeds) IVT: 1,000 PTO rpm at 2,000 engine rpm, 1,000 ECO PTO at 1594 engine rpm, 540 PTO rpm at 1,814 engine rpm
e23 PowerShift: 1,000 PTO rpm at 1,995 engine rpm, 1,000 ECO PTO at 1,590 engine rpm, 540 PTO rpm at 1,810 engine rpm
Multispeed PTO option availability Available: 45-mm (1.75-in.), 1000-rpm and 1000E economy rpm PTO, in-cab shiftable
PTO actuation Electrohydraulic with adjustable modulation

Serviceability

Interval for hydraulic/transmission oil change 1,500 hours
Interval for engine coolant change 6,000 hours
Interval for engine oil change 500 hours

Steering

Type Standard: Speed-sensitive, hydrostatic, differential: 406-mm (16-in.) diameter steering wheel - 1.8 turns lock-to-lock

Tracks

Drive type Camso® 4500 and 6500 General Ag Series - friction drive track belts
Midrollers Three
Track width Standard: 635 mm
25 in.
Available: 406 mm
16 in.
457 mm
18 in.
609 mm
24 in.
762 mm
60 in.
Tread spacing Standard: 1,828.8 to 3,048 mm
72 - 120 in.

Transmission

Type Standard: e23™ PowerShift™ with Efficiency Manager™ 40K, 40 km/h
24.9 mph
Optional: John Deere AutoPowr™ IVT™ 40K, 0.05-42 km/h (0.03-26 mph)

Weight

Maximum permissible weight 19,958 kg
44,000 lb
Maximum ballast level 17,690 kg
39,000 lb
Base machine weight

e23, 63.5-cm (25-in.) tracks: 15,600 kg
34,400 lb

Additional information

Date collected 11-Oct-19