Specifications

Capacities

Transmission-hydraulic system MFWD: 140 L
37 U.S. gal.
ILS: 165 L
43.6 U.S. gal.
Crankcase oil volume 1500 MFWD: 28 L
7.4 U.S. gal.
ILS: 27.5 L
7.3 U.S. gal.
Diesel exhaust fluid (DEF) tank 37.2 L
9.8 U.S. gal.
Fuel tank 727 L
192 U.S. gal.
Cooling system

40.3 L
10.6 U.S. gal.

Dimensions

Front axle center MFWD: 686 mm
27 in.
ILS: 590 mm
23.2 in.
Wheelbase MFWD: 3,080 mm
121.3 in.
ILS: 3,050 mm
120.1 in.
Overall length 6,636 mm
261.3 in.
Drawbar clearance 376 mm
14.8 in.

Drawbar

Drawbar category Standard: Category 4
Optional: Category 4 with heavy-duty support
Maximum vertical load Dependent on drawbar position: 1837 to 2700 kg
4050 to 6000 lb
Optional: 2,245 kg
4,950 lb
4,990 kg
11,000 lb

Electrical system

Working lights Standard: 18 halogen
Available: 18 LED
22 LED
Alternator size Standard: 200 amp
Optional: 330 amp
Type of bulb in headlight (Halogen, Zenon, LED)
Standard: halogen, 65 W
Available: LED
Total cold cranking amps 1,850 CCA
Battery options 12 V
Type of bulb in beacon (Halogen, Zenon, LED)

Engine performance

PTO torque rise 40 percent
Maximum engine power ECE-R120: 326 kW
443 hp
Power boost 8 percent
Engine peak torque At 1600 rpm: 1851 Nm
1365 lb-ft
Rated power ECE-R120: 302 kW
410 hp
Rated PTO power (hp SAE) 231 kW
310 hp

Engine specifications

Displacement 9 L
549 cu in.
After treatment type Diesel oxidation catalyst (DOC)/diesel particulate filter (DPF)/selective catalytic reduction (SCR)
Aspiration Dual turbochargers, variable geometry turbo with fixed geometry turbo in series; air-to-air aftercooling and cooled exhaust gas recirculation
Engine type Diesel, in-line, 6-cylinder, wet-sleeve cylinder liners with four valves in head
Rated speed 2100 rpm
Cylinders liners Wet-sleeve
Description John Deere PowerTech™ PSS 9.0 L (B20 diesel compatible)
Engine family JJDXL09.0308
Emission level Final Tier 4

Front axle

Type Standard: ILS
Optional: 1500 Series MFWD
Front axle differential lock 1500 Series MFWD: Full-locking electrohydraulic
ILS: Full-locking electrohydraulic

Front hitch

Front power take-off (PTO) 44 mm (1.75 in.) 20 spline, 1000 rpm
35 mm (1.375 in.) 21 spline, 1000 rpm
35 mm (1.375 in.) 6 spline, 1000 rpm (available dependent on location)
PTO speed 1,000 PTO rpm at 2000 engine rpm
Standard lift capacity Category 3N ground-engaging front hitch: 5200 kg
11,464 lb
Category Category 3N

Hydraulic system

Number of rear selective control valves (SCVs) Standard: 1.3-cm (1/2-in.) ISO couplers: 10
Optional: 1.3-cm (1/2-in.) ISO couplers: 5 and 6 available
1.9-cm (3/4-in.) ISO coupler: 7
SCV control Electronic
Available flow at a single rear SCV 1.3-cm (1/2-in.) couplers: 132 L/min
35 gpm
1.9-cm (3/4-in.) coupler: 159 L/min
42 gpm
Type Closed-center, pressure/flow compensated system with load sensing
Available flow at front SCVs 96 L/min
25 gpm
Pump rated output Standard: 85-cc pump: 227.1 L/min
60 gpm
Optional: 85-cc plus 35-cc dual pump: 321
85 gpm

Key Specs

Maximum engine power ECE-R120: 326 kW
443 hp
Rated PTO power (hp SAE) 231 kW
310 hp
Engine description John Deere PowerTech™ PSS 9.0 L (B20 diesel compatible)
Engine displacement 9 L
549 cu in.
Rear hitch category (SAE designation) Standard: Category 4N/3 standard lift at 610 mm (24 in.) behind hitchpoint: 9072 kg
20,000 lb
Optional: Category 4N/3 at 610 mm (24 in.) behind hitchpoint: 6803 kg
15,000 lb
Base machine weight ILS™/e23: 12,700 kg
28,000 lb
Hydraulic pump rated output Standard: 85-cc pump: 227.1 L/min
60 gpm
Optional: 85-cc plus 35-cc dual pump: 321 L/min
85 gpm
Transmission type Standard: e23™ PowerShift™ with Efficiency Manager™ 40K, 40 km/h (24.9 mph)
Optional: e23 PowerShift with Efficiency Manager 50K, 50 km/h (31 mph)
Rated engine power ECE-R120: 302 kW
410 hp

Loaders

Loader H480
Maximum lift height 4735 mm
186 in.
Lift capacity at full height 2,486 kg
5469 lb
measured at 800 mm (31.5 in.) ahead of pivot

Miscellaneous

Country of manufacture USA

Operator station

Cab suspension Optional
Display Standard: Generation 4 4100 CommandCenter™ with 17.8-cm (7-in.) display
Optional: Generation 4 4600 CommandCenter with 25.4-cm (10-in.) display
Instructional seat Standard
Cab glass area 6.52 m2
70.18 sq ft
Seat Degree of seat swivel, left hand
25 degree (angle)
Degree of seat swivel, right hand
40 degree (angle)
Standard: air suspension
Optional: ActiveSeat™ II
Rollover protective structure, OOS

Radio Standard: AM/FM stereo with weatherband, remote controls, auxiliary input jack, four speakers and external antenna
Inner cab volume 3.24 m3
114 cu ft

Precision AG

Guidance Integrated AutoTrac™
Telematic Available with JDLink™ hardware, activations, and Ethernet harnesses (availability dependent upon destination)
Remote diagnostics Available with activated JDLink hardware and activations

Rear axle

Rear differential lock Full-locking electrohydraulic
Type Standard: Rack-and-pinion, double flat, or flange axles
Optional: short, double flat axle with single taper hub: Diameter: 120 x 2550 mm
4.72 x 100.4 in.
Long, double flat axle with single taper hub: Diameter: 120 x 3010 mm
4.72 x 118.5 in.
Final drive type Inboard planetary three pinion

Rear hitch

Hitch category (SAE designation) Standard: Category 4N/3 standard lift at 610 mm (24 in.) behind hitchpoint: 9072 kg
20,000 lb
Optional: Category 4N/3 at 610 mm (24 in.) behind hitchpoint: 6803 kg
15,000 lb
Rear axle differential lock Electrohydraulic
Sensing type Electrohydraulic
Maximum lift capacity behind lift points Standard (at 610-mm [24-in.] behind hitch point): 12,124 kg
26,729 lb

Rear power take-off (PTO)

PTO actuation Electrohydraulic with adjustable modulation
Multispeed PTO option availability Available: 45-mm (1.75-in.), 1000-rpm and 1000E economy rpm PTO, in-cab shiftable
Engine rpm (at rated PTO speeds) e23 PowerShift: 1,000 PTO rpm at 1,995 engine rpm, 1,000 ECO PTO at 1,590 engine rpm, 540 PTO rpm at 1,810 engine rpm
Type Independent
Standard: 44 mm (1.75 in.) 20-spline, 1,000 rpm
Optional: 44 mm (1.75 in.) 20-spline, 1,000 rpm/1,000E rpm

Serviceability

Interval for engine coolant change 6,000 hours
Interval for hydraulic/transmission oil change 1,500 hours
Interval for engine oil change 500 hours

Steering

Type Standard: Hydraulic power-steering with electric pump back-up
Optional: ActiveCommand Steering (ACS™) with electric pump back-up

Tires

Wheel tread range 1500 Series MFWD: 1524-3657 mm
60-144 in.
ILS: 1524-3657 mm
Turning radius without brakes ILS with 380/85R34 group 42 tires at 152.4-cm (60-in.) spacing, 5.42 m
17.8 ft

Transmission

Type Standard: e23™ PowerShift™ with Efficiency Manager™ 40K, 40 km/h
24.9 mph
Optional: e23 PowerShift with Efficiency Manager 50K, 50 km/h
31 mph

Weight

Base machine weight

ILS™/e23: 12,700 kg
28,000 lb
Maximum ballast level SAE PTO kW: 88.6 kg
SAE PTO hp: 145 lb

Additional information

Date collected 12-Oct-19