Specifications

4WD Dimensions

Wheelbase, in. (mm) 2515 mm
99 in.
Wheel Tread, Min. to Max. in. (mm) Standard: 1829-3048 mm
72-120 in.
Optional: 2845-4064 mm
112-160 in.
Unballasted Weight, lb (kg) IVT with: fuel, 113.6 L
30 gal.
Tracks: 635 mm
25 in.
No weights: 16578 kg
36549 lb

Engine

Manufacturer John Deere
Engine family 9.0L: EJDXL09.0301
Aspiration Dual turbochargers, variable geometry turbo with fixed geometry turbo in series
Cylinders/Displacement, cu. in. (L) 6 cylinders/9.0 L
549 cu in.
Cylinder Liners Wet
Fuel tank capacity, US Gal. (L) (Open; Cab) Standard
758 L
200 gal.

Final Drive

Type Inboard planetary
Engage On-the-Go Rear Differential Lock Yes
Axle Type Bar
Brakes, Type and Control Hydraulic wet disc

Hydraulics

Type Closed-center, pressure/flow compensated
Pump Rated Output, GPM (L/min.) Standard
227.1 L/min
60 gpm
Rated Flow @ One SCV, GPM (L/min.) Rear coupler: 12.7 mm
0.5 in.
132 L/min
35 gpm
Rear coupler: 19.1 mm
0.75 in.
153 L/min
40.5 gpm
Maximum Operating Pressure, psi (kPa) 20,400 (+ or - 300) kPa
2958 psi
Hitch Draft Control Load Sense Type Electronic
Remote Control Valves Available Standard: four
Optional: five or six
Hitch Category (SAE Designation) Category 4N/3
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. Standard
Category 4N/3: 6803 kg
15,000 lbOptional
Category 4N/3: 9,702 kg
20,000 lb
Sensing type Electrohydraulic
Joystick SCV control Electrohydraulic optional

Miscellaneous

Country of Manufacture Waterloo, IA USA
Ballasting Restrictions, lb (kg) Refer to operator's manual

Official Test

Nebraska Test number TBD Nebraska Test

Operator Station

Rollover Protective Structure, OOS Gearshift Location - Console/Floor
CommandARM
Cab Doors
left handPlatform - Flat/Straddle
FlatSeat Suspension System
Air standard

Performance

Advertised PTO hp (kW) @ Rated rpm At 2100 per SAE: 229 kW
308 hp
Advertised Engine hp (kW) @ Rated speed At 2100 per 97/68EC PS: 272 kW
370 hp

Power Take-Off (PTO)

Standard 45 mm
1.75 in.
20 spline, 1000 rpm
PTO Speeds @ Engine rpm At 2000 rpm: 1000 rpm
PTO Actuation Electrohydraulic

Standard Tires

Track widths Standard: 635 mm
25 in.
Optional: 406 mm
16 in.
457 mm
18 in.
610 mm
24 in.
762 mm
30 in.

Transmission

Std. Transmission; Forward/Reverse IVT
Reverser Left-hand or Right-hand
On-the-Go Shifting (Yes/No/Partial) Yes
Clutch; Wet/Dry Wet
Creeper IVT