Specifications

Capacities

Fuel tank e23™: 463 L
122 U.S. gal.
IVT: 513 L
135 U.S. gal.
Cooling system

44.5 L
11.8 U.S. gal.
Crankcase oil volume 23 L
6.1 U.S. gal.
Diesel exhaust fluid (DEF) tank 26.2 L
6.9 U.S. gal.
Transmission-hydraulic system 160 L
42.3 U.S. gal.

Dimensions

Wheelbase 2,925 mm
115.2 in.
Drawbar clearance Group 48 rear tires: 415 mm
16.3 in.
Group 49 rear tires: 461 mm
18.1 in.
Overall length 5,540 mm
218 in.

Drawbar

Maximum vertical load Standard: Category 3: 1,837 kg
4,050 lb
Optional: Category 3 with heavy-duty support: 4,536 kg
10,000 lb
Drawbar category Standard: Category 4

Electrical system

Type of bulb in headlight (Halogen, Zenon, LED)
Standard: 65-W halogen
Available: LED
Total cold cranking amps With two 925 CCA group 31 batteries: 1850 CCA
Alternator size Standard: 210 amp
Optional: 250 amp
Working lights Standard: 18 halogen
Available: 18 LED or 22 LED
Type of bulb in beacon (Halogen, Zenon, LED)
Battery options 12 V

Engine performance

Engine peak torque At 1600 rpm: 1,452 Nm
1,071 lb-ft
Rated power ECE-R120: 228 kW
310 hp
Maximum engine power ECE-R120: 251 kW
341 hp
Rated PTO power (hp SAE) 193 kW
260 hp
PTO torque rise 40 percent
Power boost 22.4 kW
30 hp

Engine specifications

Description John Deere PowerTech™ PVS (B20 Diesel Compatible) 9.0L
Rated speed 2100 rpm
Aspiration Single turbocharger, variable geometry turbo
Engine type Diesel, in-line, 6-cylinder, wet-sleeve cylinder liners with 4 valves in head
After treatment type Diesel oxidation catalyst (DOC)/diesel particulate filter (DPF)
Emission level Final Tier 4
Displacement 9 L
549 cu in.
Engine family JJDXL09.0308

Front axle

Front axle differential lock 1300 Series MFWD: Limited slip
TLS: Limited slip
TLS with front brakes: Full-locking electrohydraulic (actuated at same time as rear diff lock)
Type Standard: 1300 Series MFWD: tread range 1524 to 2235 mm
60 to 88 in.
Optional: TLS: Tread range 1524 to 2235 mm
TLS with front brakes available with 40 km/h
24.9 mph
TLS with front brakes standard with 50 km/h
31 mph

Front hitch

Standard lift capacity 5,200 kg
11,464 lb
Category Category 3N, ground engaging
Electric power Seven-pin connector
Front power take-off (PTO) Available
Optional: 44.45 mm (1.75 in.), 20 spline, 1,000 rpm, counter-clockwise rotation (when facing PTO)
35 mm (1.375 in.) 21 spline, 1,000 rpm, counter-clockwise rotation (when facing PTO)
35 mm (1.375 in.) 6 spline, 1,000 rpm, counter-clockwise rotation (when facing PTO)**
PTO speed 1,000 PTO rpm at 1940 engine rpm

Hydraulic system

Available flow at a single rear SCV 132 L/min
35 gpm
Number of front selective control valves (SCVs) One with front hitch
Pump rated output Standard: 63 cc: 162 L/min
43 gpm
Optional: 85 cc: 222.3 L/min
59 gpm
Type Closed-center, pressure/flow compensated system with load sensing
SCV control Electronic
Available flow at front SCVs 126 L/min
33 gpm
Number of rear selective control valves (SCVs) Standard: Four SCVs
Optional: Three to six ISO couplers: 12.7 mm
1/2 in.
Five ISO couplers (SCV 1: 19-mm [3/4-in.] couplers, SCV 2-5: 12.7-mm [1/2-in.] coupler)

Key Specs

Base machine weight e23, TLS™, 18.4R46: 10,000 kg
22,000 lb
Transmission type Standard: John Deere e23™ 42 km/h
26 mph
Optional: John Deere e23 transmission 50 km/h
31 mph
John Deere Infinitely Variable Transmission (IVT™) 0.050-42 km/h (0.030-26 mph)
John Deere Infinitely Variable Transmission (IVT) 0.050-50 km/h (0.030- 31 mph)
Rear hitch category (SAE designation) Standard: Category 3N/3 with Quik-Coupler
Optional: Category 3/3N with hook ends
Category 3N/3 with hook ends
Hydraulic pump rated output Standard: 63 cc: 162 L/min
43 gpm
Optional: 85 cc: 222.3 L/min
59 gpm
Engine description John Deere PowerTech™ PVS (B20 Diesel Compatible) 9.0L
Rated PTO power (hp SAE) 193.9 kW
260 hp
Engine displacement 9 L
549 cu in.
Maximum engine power ECE-R120: 251 kW
341 hp
Rated engine power ECE-R120: 228 kW
310 hp

Loaders

Maximum lift height 4,704 mm
185.2 in.
Loader H480
Lift capacity at full height 2,411 kg
5,315 lb

Miscellaneous

Country of manufacture USA

Operator station

Instructional seat Standard
Inner cab volume 3.24 m3
114 cu ft
Cab glass area 6.56 m2
70.61 sq ft
Rollover protective structure, OOS

Display Standard: 4100 Generation 4 CommandCenter™: 17.8 cm
7 in.
Optional: 4600 Generation 4 CommandCenter: 25.4 cm
10 in.
Radio Standard: AM/FM stereo with weatherband, remote controls, auxiliary input jack, four speakers and external antenna
Seat Degree of seat swivel, left hand
25 degree
Degree of seat swivel, right hand
40 degree
Standard: air suspension
Optional: ActiveSeat™ II
Cab suspension Optional

Precision AG

Remote diagnostics ServiceADVISOR™ Remote: available with JDLink hardware and activations
Remote Display Access: available with JDLink hardware and activations
Guidance Integrated AutoTrac™
Telematic JDLink™

Rear axle

Final drive type Inboard planetary three pinion
Rear differential lock Full-locking electrohydraulic
Type Standard: Rack-and-pinion or flange axles
Optional: Diameter: 110 x 2550 mm
4.33 x 100.4 in.
Diameter: 110 x 3010 mm
4.33 x 118.5 in.
Diameter: 120 x 2550 mm
4.72 x 100.4 in.
Diameter: 120 x 3010 mm
4.72 x 118.5 in.
Flanged axle: 335 mm (13.2 in.)

Rear hitch

Maximum lift capacity behind lift points Standard (Category 3): 6,894 kg
15,200 lb
Optional (Category 3N): 7,847 kg
17,300 lb
Standard (Category 3 with hook ends): 6,894 kg
Optional (Category 3N with hook ends): 7,847 kg
Sensing type Electrohydraulic
Hitch category (SAE designation) Standard: Category 3N/3 with Quik-Coupler
Optional: Category 3/3N with hook ends
Category 3N/3 with hook ends

Rear power take-off (PTO)

Type Independent
Standard: 44.45 mm (1.75 in.) 20-spline, 1,000 rpm
Optional: 44.45 mm (1.75 in.), 20-spline, 1,000 rpm capable of 35 mm (1.375 in.) 540/1000 rpm
44.45 mm (1.75 in.) 20-spline, 1000 rpm with 35-mm (1.375-in.) 540E/1000/1000E rpm gearcase
44.45 mm (1.75 in.) 20-spline, 1000 rpm with 35-mm (1.375-in.) 540/540E/1000 rpm gearcase
PTO actuation Electric switch with adjustable modulation
Engine rpm (at rated PTO speeds) 540/1000 PTO rpm at 1950 engine rpm
540E/1000E PTO rpm at 1750 engine rpm

Serviceability

Interval for hydraulic/transmission oil change 1,500 hours
Interval for engine oil change 500 hours
Interval for engine coolant change 6,000 hours

Steering

Type Standard: Hydrostatic power

Tires

Front RCI Group 43/44
Rear RCI Group 48/49
Turning radius with brakes 600/70R30 group 43 tires at 188.2-cm (74.1-in.) spacing, TLS: 6.7 m
22 ft
620/75R30 group 44 tires at 208.3-cm (82-in.) spacing, TLS: 8.7 m
28.5 ft

Transmission

Type Standard: John Deere e23™ 42 km/h
26 mph
Optional: John Deere e23 transmission 50 K
31 mph
John Deere Infinitely Variable Transmission (IVT™) 0.050-42 km/h (0.030-26 mph)
John Deere Infinitely Variable Transmission (IVT) 0.050-50 km/h (0.030- 31 mph)

Weight

Base machine weight

e23, TLS, 18.4R46: 10,000 kg
22,000 lb
Maximum ballast level SAE PTO hp: 61.2 kg
135 lb

Additional information

Date collected 12-Oct-19