Specifications

3-point hitch

Lift capacity, 24-in. behind link arms 615 kg
1356 lb
Type Category 1

Dimensions

Wheelbase 172.5 cm
67.9 in.
Turning radius with brakes 2.75 m
9.02 ft
Turning radius without brakes 3 m
9.84 ft
Approximate shipping weight (open-station; cab) 1105 kg
2436 lb

Electrical

Battery size 500 CCA
Alternator (12-V) 85 amp
Starter size 1.4 kW
1.9 hp

Engine

Family GYDXL1.57TDA
Manufacturer Yanmar
Engine model 3TNV88C-NJT
Engine power (gross) 27.4 kW
37.3 hp
SAE J1995 rated power
Power take-off (PTO) power 22.7 kW
30.4 hp
Rated engine speed 2500 rpm
Type Direct Injection
Injection pump type Direct Injection
Aspiration Turbocharged
Emissions compliance Final Tier 4
Cylinders/displacement 3 / 1.568 L
3 / 95.8 cu in.
Number of cylinders Three
Cylinder liners Cast-in-block
Bore and stroke 86x90 mm
3.39x3.54 in.
Compression ratio 19.1:1
Lubrication Pressurized
Cooling system Water pump
Air cleaner Dual element
Engine torque at rated speed 101.4 Nm
74.8 lb-ft
Fuel tank capacity 32 L
8.5 U.S. gal.

Final drive

Type Spur Gear
Differential lock Yes

Fluid capacities

Crankcase with filter 4.5 L
4.8 qt

Fuel system

Type Direct Injection
Fuel consumption <br/>

Hydraulics

Type Open center
Pump type Gear
Maximum operating pressure 172.37 bar
2500 psi
Draft control sensing Position control
Remote control valves available Up to three
Pump rated output Steering<br/>15 L/min<br/>4 gpm<br/>Implement<br/>20.2 L/min<br/>5.3 gpm<br/>35.2 L/min<br/>9.3 gpm

Key Specs

Standard transmission; forward/reverse Hydrostatic transmission (HST)
Implement hydraulics 20.2 L/min<br/>5.3 gpm
Engine power (gross) 27.4 kW<br/>37.3 hp<br/>SAE J1995 rated power
Steering hydraulics 15 L/min<br/>4 gpm
Hitch type Category 1
Lift capacity, 24-in. behind link arms 615 kg<br/>1356 lb
Wheelbase 172.5 cm<br/>67.9 in.
Power take-off (PTO) power 22.7 kW<br/>30.4 hp
Cruise control Standard
Approximate shipping weight (open-station; cab) 1105 kg<br/>2436 lb

Miscellaneous

Toolbox Yes
Tilt steering wheel Yes
12-V Outlet Yes

Operator station

Rollover protective structure Type
Foldable
ASABE S478
Platform - flat/straddle Flat
Gear shift location - console/floor Left-hand side

Power take-off (PTO)

Standard Rear - 540 rpm
Mid - 2000 rpm
Control Independent
Clutch Independent
Brake (for mid and rear PTO) Wet disc

Tires

Front R1 Ag 7.00-12
R3 Turf 23x8.50-14
R4 Industrial 23x8.50-14
R3 Turf Radial 200/60 R15
Rear R1 Ag 12.4-16
R3 Turf 14-17.5
R4 Industrial 14-17.5
R3 Turf Radial 300/70 R20

Transmission

Standard transmission; forward/reverse Hydrostatic transmission (HST)
Final drive Bull Gear
Brakes Wet disc
Steering Power steering
Creeper No
Cruise control Standard
Differential lock Yes
Axle capacity Front<br/>880 kg<br/>1940 lb<br/>Rear<br/>1089 kg<br/>2400 lb<br/>