With the universal Quik-Tatch,™ you can go from skid steer bucket, to forks, to whatever, in just seconds. Each loader model delivers plenty of standard hydraulic power to operate augers, roller levels, trenchers, or power rakes, to list just a few.
Larger entryways with swing-out doors make it easier to get in, get comfortable, and get on with it. Inside, there’s more productivity-enhancing foot- and legroom.
Three-way switchable controls between EH foot, ISO joystick, or H-pattern joystick modes. Includes switchable accelerator/decelerator with right-side foot pedal when operating in ISO or H-pattern joystick-control mode.
Final Tier 4 (FT4)/EU Stage IV diesel engine packs plenty of power and torque.
Unique Tri-Cool design resists debris buildup and employs large coolers for standout performance in severe, high-load conditions. Add a reversible fan in high-debris applications for quick core cleanout.
Factory-installed performance package offers increased productivity and ease-of-use with the following capabilities:
Return to Dig allows the operator to automatically set the bucket or other attachment to his/her designated ready-to-work position.
Return to Carry allows the operator to use joystick detents to automatically reset the boom to a designated ready-to-carry position.
Boom Height Kickout allows the operator to pre-select a specific boom height based on truck/hopper height and use joystick detents to automatically stop at a specific height.
Electronic Self-Level allows the self-level to work on the boom up and down unlike the hydraulic self-level option that works only on boom up.
This option, installed in-factory or in the field, provides cross-slope or roll and mainfall slope or pitch of the machine within the in-cab monitor display.
Easy-to-use
Real-time interface
Roll and pitch viewable as either “absolute” or “relative” values
Roll and pitch viewable in either degrees or percent
CAPACITIES
Fuel Tank, ltr (gallons (US))
96.5 (25.5)
DESCRIPTION
Lift Geometry
Vertical
Proximity Guidance
No
Fleet Management
Yes
Precision Guidance
No
DIMENSIONS
Wheelbase, mm (inches)
1270 (49.9)
Dump Angle, Degrees
48
Reach - Max Dump Height Foundry, mm (inches)
710 (28)
Overall Height, mm (inches)
2190 (86.3)
Width - No Bucket, mm (inches)
1980 (78)
Height to Hinge Pin, mm (inches)
3350 (132)
Ground Clearance, mm (inches)
250 (9.7)
Length - No Bucket, mm (inches)
3100 (122)
Rear Departure Angle, Degrees
29
Length - With Bucket Foundry, mm (inches)
3710 (146)
Rollback - Ground Level, Degrees
35
Dump Height - Maximum Foundry, mm (inches)
2690 (106.1)
DRIVELINE
Drive Chain Rating [ANSI]
100 - HD
Engine Manufacturer
Yanmar
Tire size - Standard
14 - 17.5 - 12 PR Extra Wall
SAE Gross Power, kW (hp)
68 (91.2)
Emission Rating
Tier 4
Engine Model
4TNV94FHT
Max. Gross Torque, Nm (lbf / ft)
382 (281.8)
SAE Net Power, kW (hp)
66 (88.5)
Aspiration
Turbo. Intercooled
Rated Engine Speed, rpm
2500
Displacement, ltr (Inches³)
3.1 (186.3)
PERFORMANCE
Hydraulic Power, kW (hp)
31.402 (42.1)
Rated Operating Capacity - Foundry, kg (lbs)
1362 (3000)
Rated Operating Capacity - Optional Counterweight Foundry, kg (lbs)
Fill out this form to request a quote. A representative will get in touch with you as soon as possible.
Thank you for submitting.
Request Service
Fill out our request form to contact us about service.
Thank you for submitting.
Request Parts
Fill out our request form to contact us about parts.
Thank you for submitting.
Request Used Parts
Fill out our request form to contact us about used parts.
Thank you for submitting.
Request Rental
Fill out our request form to contact us about rentals.
Thank you for submitting.
Contact us about Precision Ag
Fill out our request form to contact us about precision ag technology.
Thank you for submitting.
Contact us
Fill out our contact form and a representative will be back in touch with you soon.
Thank you for submitting.
Learn More About Our Service Programs
Thank you for submitting.
Send us your feedback
We'd love to hear your feedback! Please fill out the form below to share.
Thank you for submitting.
Body Shop
Fill out this form to get in contact with our body shop. A representative will get in touch with you as soon as possible.
Thank you for submitting.
Papé Technician Training Program Interest Application
Thank you for submitting.
Technician Application
Thank you for submitting.
Events, Donations and Sponsorships
Thank you for submitting.
Join The Papé Team
Fill out our career form and a representative will be back in touch with you soon.
Thank you for submitting.
Contact us
Fill out our contact form and a representative will be back in touch with you soon.
Thank you for submitting.
Thank you for coming in, you are important to us! Please fill in your information below and one of our members will help you as soon as we can.
Thank you for submitting.
Thank you for your interest in electrification, you are important to us! Please fill in your information below and one of our members will reach out to you as soon as we can.
Thank you for submitting.
Giveaway Submission
Thank you for submitting.
Vaccination Status Survey
Thank you for submitting.
General Newsletter
Thank you for submitting.
Hawaii Newsletter
Thank you for submitting.
Request Dealer Transfer
Thank you for submitting.
Contact us
Fill out our contact form and a representative will be back in touch with you soon.
Thank you for submitting.
Thank you for your interest in upgrading to a premium John Deere compact utility tractor. Please fill in your information below and a Papé Machinery member will contact you shortly.