John Deere LW11 Series In-Line Bale Wrapper
Agriculture
- Bale push is integrated into machine
- Wrapping cycle shuts down when out of film
- 120 bales per hour
- Central control box operates all hydraulic functions
| Dimensions - Overall machine shipping length | 5 m 16.4 ft |
|---|---|
| Wrapping - Bale guide rollers | Two standard |
| Tires - Size (rear) | 27x10.5 Traction |
| Dimensions - Overall machine width | 2.7 m 9 ft |
| Tires - Size (front) | 11L-15 Implement |
| Wrapping - Wrapping capacity | 120 bales per hour |
| Set-up time - Labor hours | 1 |
| Power - Engine size | 9.7 kW 13 hp |
| Hitch - Length | Adjustable |
| Hitch - Type | Folding |
| Tires - Quantity | Four (two front, two rear) |
| Lighting, marking and safety - Safety tow chain | Standard |
| Weight - Towing unit minimum weight | 1,511.8 kg 3,333 lb |
| Power - Start type | Electric |
| Controls - Lift mechanism | Hydraulic rear axle rotation |
| Power - Engine type | Honda |
| Wrapping - Bale alignment | Fixed bale guides |
| Warranty - Machine | 1 year |
| Controls - Steering | Hydraulic with optional remote control |
| Final bale push off - Bale pusher | Self-contained scissor linkage |
| Power - Alternator size, amp | 18 amp |
| Final bale push off - Unloading | Manual cross tube |
| Wrapping - Cycle time | Adjustable with limit switches |
| Bale capacity - Round bale diameter | 1.7 m 5.5 ft |
| Controls - Power drive | Optional, hydraulic single or dual wheel |
| Dimensions - Overall machine length | 5.5 m 18 ft |
| Lighting, marking and safety - Jack | Standard |
| Lighting, marking and safety - Markings | SMV and reflectors |
| Controls - Type | Electric over hydraulic 12 V |
| Wrapping - Film tensioners | Two aluminum rollers: 76.2 cm 30 in. with stretch: 55 percent |
| Dimensions - Overall machine height | 2.7 m 9 ft |
| Lighting, marking and safety - Transport safety lights | Standard |
| Weight - Weight | 2,268 kg 5,000 lb |
| Wrapping - Hoop speed | Adjustable flow control valve |
| Controls - Hydraulic system | Self-contained |
Featured List
- Wrapping Capacity: 120 bales / hr
- Bale Capacity: 5 ft. 6 in. (1.7 m) round
- Power: 13 hp (9.7 kW)
Featured Content
Adjustable tongue (hitch)
The adjustable tongue (hitch) folds neatly out of the way for wrapping. It is located at the opposite end of where the bales are wrapped.
The adjustable tongue makes moving and repositioning the machine a quick and easy task, saving time and money.
Sensor comprised of silver rod and limit switch
The film wrap sensor automatically shuts down the wrapping cycle when the machine runs out of film or breaks.
Remote steering and shutdown conversion kits allow the operator to steer and start/stop the wrapper from the operator station of the tractor or from the skid steer that is loading the bales into the wrapper.
The first kit listed is a dual-wheel hydraulic power drive conversion kit that allows the wrapper to be driven and powered by its own hydraulic system. Dual drive improves traction in wet and slick conditions.
The second kit listed is a single-wheel hydraulic power drive conversion kit that allows the wrapper to be driven and powered by its own hydraulic system. One rear tire is hydraulically driven.
Assist in difficult field conditions
Traction implement tires make the in-line wrappers sure-footed on wet and uneven terrain to help get the machine where it needs to be for wrapping bales.
The LW11 Series comes standard with the traction implement tires, and they are available on the LW12 Series only when ordered with single- or dual-power drive.
A conversion kit provides night working lights on LW1166 and LW1266 In-Line Bale Wrappers.
14.9-kW (20-hp) Honda® engine
A larger horsepower engine with a high-flow pump provides increased capacity to complete the job faster.
NOTE: LW Series In-Line Bale Wrappers come standard with a 9.7-kW (13-hp) Honda engine.
Single- and dual-power drive
Optional single-power drive
Optional single- or dual-power drives allow the operator to maneuver the unit without attaching it to a tractor. The single-power drive has one rear tire, while the dual-power drive has two rear tires, to provide traction for the unit. These features are great for wet or uneven ground conditions where traction is limited.
Steering remote control
Remotely stops and starts the unit
This remote control allows the operator to steer, start, and stop the machine without using the control panel on the machine.
Twin wrap kit
Twin wrap kit
This kit provides a double layer of wrap, increasing the amount of wrap applied to the bales.
Bale follower
The bale follower allows the in-line wrapper to automatically follow the line of bales next to it.
Work lights
Lights allow operators to work longer hours
For early morning or late-night work, choose between two optional work lights: light-emitting diode (LED) and halogen.
Honda is a trademark of Honda Motor Co., Ltd.
Multipurpose control center
The control box and levers are the control center of the in-line bale wrappers.
Some of the uses include turning the unit on and off, and controlling the bale ramp and bale push.
Optional bale push-off arm
Operator needs to extend arm
The bale push moves the bale to the back of the bale wrapper. From this point, the operator can utilize the optional bale push-off arm to finish the process. The operator moves a lever to extend the arm, and the arm pushes the bale off onto the ground.