The 54-in. (137-cm) Accel Deep Mower Deck is a stamped-steel, deep, flat-top design that delivers excellent cut quality, productivity, cleanliness, durability, and versatility. Optimal performance and dispersion of clippings is provided, even at faster mowing speeds:
4.83-in. (12.3-cm) depth throughout the entire deck shell for optimum mowing, mulching, and bagging performance
Optional MulchControl™ attachment provides superior mulching performance and versatility.
Stamped-steel design eliminates sharp edges and corners where material can build up and diminish mowing performance
Mower deck is suspended from the vehicle for a smooth and level cut
Adjustable mower wheels, positioned just above ground level, help reduce scalping
Excellent cut quality
54A Mower top
54A Mower underside
Deep mower-deck stamping gives excellent cut quality. It allows the cut and suspended material room to exit the deck without getting recut:
Reducing the amount of re-cutting enables more power to be used to cut incoming grass, which greatly improves mower capacity.
Helps maintain excellent cut quality at faster mowing speeds
Clean flow of material out of discharge area prevents cut material from interfering with cutting the incoming grass, making it possible for the blades to cut incoming material cleanly.
Even in mulching mode, cut evenness is improved compared to other designs because the additional depth allows for continuous circulation, optimal re-cutting, and an even distribution of clippings.
How MulchControl works
MulchControl baffle open
MulchControl baffle closed
MulchControl is an innovative, simple design that is easy to use and maintain:
The MulchControl attachment includes baffles to control the flow of material under the deck.
The MulchControl baffle, or divider, between the left and middle spindles is about half way down. The height is designed to balance the mulching and side-discharge modes.
When the MulchControl baffle is open, the divider between the left and middle spindles passes a portion of the material to the discharge opening, along with the material from the middle and right spindle areas.
When the MulchControl baffle is closed, the material stays within the deck and gets chopped into mulch and deposited in the turf.
Productivity - getting the job done fast
Right side of Accel Deep 54A Mower Deck
Deep mower-deck stamping gives high productivity, which gets the job done fast. It allows the cut and suspended material room to exit the deck quickly, reducing the amount of re-cutting so more power is available to process incoming grass:
Greatly improves mowers capacity to maintain excellent mowing performance in difficult mowing conditions and at higher speeds
Large discharge opening is both high and wide to handle more material:
Gives a smooth, even discharge of clippings at all mowing speeds
Reduces the chance of plugging, especially important when operating in wet, thick, or dense grass and when bagging
The 54A Power Flow™ blower has an inlet housing with over 20 percent greater area than the 54X Power Flow blower used on previous machines.
Cleanliness - for the mower and the operator
Accel Deep 54A Mower Deck
Accel Deep 54A Mower Deck
The flat-top shape of the deck stamping is optimal for keeping itself and the operator clean:
There are few places to catch and hold material on top and underneath the deck.
Top of deck stays cleaner, reducing time and effort needed for cleaning and service
Underside of deck is self-cleaning to maintain optimum performance without build-up of material to interfere with the flow of air and clippings
Less need to clean and remove build-up of material from underside deck
The depth of the Accel Deep mower deck minimizes the amount of material that escapes from the front of the deck
Limited amount of material to drift onto the operator and mower deck
Even for material discharged out the chute, less re-cutting results in larger pieces that are less likely to end up on the operator
Mulching prevents the discharge of material completely and the MulchControl attachment makes mulching a practical solution for most mowing situations.
Cleaning a mower deck, both top and bottom, is one of the most frequent maintenance activities:
The flat-top design reduces places for material to build up and makes material that does collect easy to remove.
Mower wash port
Mower wash port with hose connector
A wash port is provided to make cleaning the underside of the mower deck easy.
Hose connector is included with the mower deck.
Superior durability is designed in
Spindle pocket with flip-up cover
Easy-to-adjust mower wheel and mower side reinforcement
The 54A Mower Deck has strong spindle pockets, to keep the blades aligned, even after years of tough service:
Ribs in the deck shell add strength where it is needed.
The 54A has a 3 percent heavier overall weight than the Edge™ Xtra 54-in. (137-cm) mower deck used on previous machines.
Mower wheels are heavy duty:
Provides greater strength and durability for longer, trouble-free life.
Setting wheels to the correct height for the cutting height quick and easy.
Low-tension belt-drive design reduces the side load on engine lower bearings and mower deck bearings for longer life.
The 54A Mower Deck features a 5/8-in. (16-mm) diameter solid-steel rod side bumper that provides extra strength and protection.
Dual-stage E-coat and powder-paint coatings provide extra protection from rust.
Versatility - easy to change between side discharge, mulch, and bagging modes
The 54A Mower is designed for maximum versatility, providing the greatest ease in changing from one mower discharge mode to another:
With the optional MulchControl attachment installed (along with the special mulching blades), changing from side-discharge to mulching or vice versa is done with the simple flip of a lever.
The Power Flow rear bagger can be used with the MulchControl attachment and blades installed - by simply placing the MulchControl lever in the side-discharge position.
MulchControl option
The MulchControl attachment for the 48A Mower Deck makes mulching more practical for many mowing situations because it not only does an excellent job of mulching but it also allows the mower to be easily converted for times when it is more desirable to side discharge or collect the lawn material. Advantages of mulching grass clippings include:
A beautiful looking lawn
Grass clippings not blown onto the operator, driveways, or flower beds
Less fertilizer use
Elimination of the effort needed to dispose of clippings
MulchControl baffle closed
MulchControl handle
The MulchControl handle is located on top of the mower deck and used to open and close the discharge baffle.
The operator is required to get off of the machine in order to engage or disengage mulch mode.
Changing from mulching to side discharge or vice versa takes only a few seconds.
MulchControl is well-suited to the following mowing situations:
Usually mulch, but side discharge when grass gets too long
Usually side-discharge, but would like to be able to close the chute to control clippings
Always mulch a main lawn, but often side discharge secondary lawns
Bag clippings, but want to go farther before emptying bags
MulchControl puts the operator in control of the clippings. Now the operator can have all the benefits of mulching with the ability to easily change to side discharge or bagging when needed.
While in the side-discharge mode, MulchControl will still mulch about one third of the material. Therefore, the side-discharge mode is essentially a partial-mulch mode. This can be an advantage when side discharging or bagging, as it helps to reduce the amount of material being discharged. Other times this could work as a disadvantage:
When cutting strong southern grasses, such as Zoysia and Bermuda
When cutting in wet, high-growth conditions, such as those found in the Pacific Northwest United States
When optimum bagging and lawn clean-up is desired
7-bu (247-L) Power Flow rear bagger
Optional rear bagger
Power Flow blower
An optional 7-bu (247-L) rear bagger material collection system (MCS) is available. It provides an efficient means of collecting grass clippings and leaves:
The Power Flow blower and chute are easy to install. The Power Flow blower swings out for easy cleanout and cleanup.
The hopper design provides modern styling, great bagging performance, cleaner operation, and easy-to-empty bags:
7-bu (247-L) capacity
Easy-to-attach Power Flow blower (ordered separately)
The tractor is powered by a John Deere iTorque™ power system, a combination of engine features and an exclusive hood design providing superior lugging ability, even cooling, and durability. Key engine features include:
24 hp (17.9 kW)
Large 726 cc displacement
V-twin air-cooled design
Excellent power and performance
Smooth, quiet power
Easy starts
Quality features include:
Cast-iron cylinder liners
Overhead valves
Full-pressure lubrication
Replaceable oil filter
Dual-stage air cleaner
Solenoid-shift starter for easy starts, even in cold weather
Flywheel alternator
A flywheel alternator provides plenty of capacity to quickly recharge the battery and power electrical equipment, such as lights or a sprayer:
15-amp capacity
Regulated to keep the battery at a full charge, without risk of overcharging
Deck-leveling gauge and hex adjusting tool stored under tractor seat
Exact Adjust access holes
A mower deck must be level side-to-side and properly adjusted front-to-rear to give the best cutting performance. A removable on-board deck-leveling gauge and a hex-key tool are provided to make adjustment easy. They are securely stored under the tractor seat.
Exact Adjust leveling ports are provided on each side of the operator platform above the mower-level adjusting bolts. With the hex-shaped tool, they provide convenient access to allow quick and easy adjustment of the mower for the best-cut quality of cut.
The Exact Adjust feature is standard on all Select Series™ X300 and X500 Tractors:
There is no need to reach under the fender deck while making the mower-level adjustment.
On-board deck-leveling gauge, Exact Adjust ports, and the hex tool work together.
Level the mower deck side to side
Set the correct amount of rake (front-to-back deck orientation)
Calibrate the cutting height to the cut-height adjusting knob setting
Exact Adjust simplifies leveling the mower deck if equipped with a Power-Flow™ blower.
To give the best cut, mower level should be adjusted if alternately mowing with and without blower installed. The Exact Adjust feature makes this easy.
Deck-leveling tool placed under deck
Using included ball-hex tool to level mower deck
Consult the operator's manual for the correct adjusting procedures for each tractor model. Basic adjusting steps to properly level the mower deck include:
Park the tractor on a level surface.
Inflate tires to the correct pressure.
Consult the label for the cutting-height knob that is located on the console of the machine. This label shows deck-leveling position and location of deck-leveling adjustment points.
Set mower cutting-height knob to the correct deck-leveling position.
For X300 models, use position 2.75
For all other models, use position 2.5
Adjust mower wheels as necessary so they do not contact the ground surface.
Remove the onboard deck-leveling gauge that is located under the seat.
Using the Exact Adjust ports and tool, adjust mower deck side-to-side level so the deck-leveling gauge just slips under the left and right lower deck rim at the designated adjustment points. The location of adjustment points will vary slightly between decks.
Left- and right-rear adjustment points are under the deck rim near the rear mower wheels, if equipped.
Adjust mower deck front-to-back level, if necessary.
Loosen rear nuts equally on each side of front lift rod.
Turn front nut equally on each side clockwise to raise front of mower or counterclockwise to lower it until gauge just slips under the front adjustment point.
Tighten rear nuts after adjustment is complete.
Return the gauge to its storage position.
NOTE: The adjusting tool supplied with the tractor is an 8-mm ball-hex key, part number M162737. The rounded end allows for some misalignment with the bolt as the deck is adjusted.
Buyer's notes
Notes
Heavy-duty garden tractor transaxle Steering spindle bushings for long life Built-in rear weight bracket
Warranty
4 year/500 hour bumper-to-bumper** (**Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.)
Chassis
Frame
Welded heavy-duty
Primer/paint
E-coat/powder
Weight bracket
Standard rear, optional front - each holds up to four Quik-Tatch weights, 42 lb 19 kg
Receiver hitch
No
Front axle
Cast iron front axle, front wheel ball bearings
Spindle bushings
Metal, replaceable
Front tires
15x6.5-8
Rear tires
24x12-12 turf
Hood material
Molded-in color hood material reduces sound, will not rust or dent
Fender deck material
Stamped steel
Floor mats
Sure-grip rubber
Storage
Yes, under seat and covered toolbox
Service interval decal
Yes
Fender handles/grips
Handles
Cup holder
Yes
Equipment mounting
Yes, heavy duty
Dimensions
Height
45 in. 114.3 cm
Overall length
75 in. 190.5 cm
Wheelbase
51.2 in. 130 cm
Width with mower
68.4 in. 174 cm
Width with mower (deflector raised for storage)
59.4 in. 151 cm
Width without mower
41 in. 104.1 cm
Weight
Mower, no fuel, 756 lb 343 kg
Electrical system
Battery
12 V 500 CCA
Charging system
Flywheel alternator, regulated, 15 amp
Hourmeter
Yes
Headlights
Two standard, incandescent, 27 W
Taillights or reflector
Reflectors
Backup lights
No
Rear work lights
No
12-V outlet
Yes
Engine
Power
24 hp 17.9 kW
Displacement
44.3 cu in. 726 cc
Manufacturer/model
FS730V
Type
Overhead valve, full-pressure lube, oil filter
Cylinders
V-twin, cast-iron liners
Governor
Mechanical
Choke/speed control
Separate levers, automatic choke return
Cooling method
Air
Air cleaner
Dry, replaceable with foam precleaner
Oil drain
No tools
Fuel system
Type
Gasoline
Fuel delivery
Pulse pump and carburetor
Fuel gauge
Gauge on dash
Fuel tank location
Rear
Fuel fill opening
On left fender, 3 in. 7.6 cm
Fuel tank capacity
4.4 U.S. gal. 16.7 L
Lift system
Type
Foot pedal with adjustable spring assist
Hydraulic outlets
No
Mower cut height
13 positions, 1-4 in. 2.5-10.2 cm
Cut height increments
0.25 in. 0.64 cm
Preset cut height
Yes
Mower attachability
Type
Roll under tractor
Front draft arms
Attached with spring pins at two points
Rear draft arms
Quick-pull pins
Mower wheels rotate
Yes, 90 degrees for easy mower removal
Drive system
Dual belt
Mower deck
Type
Side discharge
Cutting width
54 in. 137 cm
Construction
Stamped steel deck shell
Mower deck material
10 gauge 0.135 in. 3.4 mm
Mower wash port
Yes
Mower drive system
Electric power take-off (PTO) clutch, in-line belt
Mower wheels
Four
Mower wheel adjustment
Seven-position, spring-loaded pin
Mower level adjustment
Exact Adjust ports and onboard deck-leveling gauge
Optional equipment
Mowers
54A (standard)
Rear bagger
7, 14, 19 bu 247, 493, 670 L
Powered material collection
Power Flow™ blower
Mulching system
Yes, MulchControl™
Front thatcher
38, 46, 54 in. 96.5, 116.8, 137.2 cm
Front blade
48 in. 121.9 cm
Snow blower
Two-stage, 44 in. 111.8 cm
Rotary tiller
Mechanical, 30 in. 76.2 cm
Sleeve hitch
Yes, implements include box scraper, rear blade, plow, disk, and cultivator
Plow, moldboard
Yes
Box scraper
Yes
Cultivator
Yes
Rear blade
Yes
Sprayer
Tow-behind, 15, 25, 45 U.S. gal. 56.8, 94.6, 170.3 L Mounted, 25 U.S. gal. 94.6 L
Spreader
125, 175 lb 57.7, 79.4 kg Mounted, 125 lb 57.7 kg
Front bumper
Styled bumper option
Brush guard
Yes
Weather protection
Weather enclosure
Sun canopy
Yes
Bucket holder
Yes, double bucket
Grass striping
Lawn striping kit
Tractor shovel
40 in. 101.6 cm
Tow-behind tools
19
Safety
Meets ANSI standard
Yes
Meets OPEI standard
Yes
Backup protection
Reverse Implement Option (RIO)
Safety video
Yes
Seat
Type
Open-back design with grasp
Seat back height
15 in. 38.1 cm
Armrests
No
Fore-aft adjustment
While seated, slide rail, 14-position, 7 in. 17.8 cm
Seat suspension
Tilt, two coil springs, three-position no-tools adjustment for operator weight