Specifications

Blades

Length Varies by deck size
Number Three
Blade tip speed Approximately 18,000 fpm
5,486 m/min
Thickness 0.25 in.
0.64 cm

Brakes

Dynamic braking Twin levers
Park brake Internal wet disk integrated in the transmission
Park brake actuation Hand brake

Buyer's note

Warranty 36 months or 1200 hours, whichever comes first
First 24 months, no hour limitation

Dimensions

Width With chute down, 74, 86 in.
188, 218 cm
Height With ROPS up, 73 in.
185 cm
With ROPS down, 47 in.
119 cm
Weight 1,252 to 1,340 lb
568 to 608 kg
Length 84 in.
213 cm

Drivetrain

Wheel motors Tuff Torq heavy-duty integrated piston wheel motor
Speed and direction control Twin levers
Filter Internal, replaceable
Travel speed Speed range
0-10 mph
0-16.1 km/h
Forward
0-10 mph
16.1 km/h
Reverse
0-4.5 mph
0-7.2 km/h
Transmission Hydrostatic
Hydraulic capacity 5.9 U.S. qt
5.6 L

Electrical system

Charge system 20 amp
Battery voltage 12 V
Cold cranking amp 300 amp
Hour meter Standard, digital
Operator presence starting system Brake-N-Go (hand)

Engine

Cylinders Two
Oil filter Full flow, replaceable
Lubrication Full pressure
Cooling Air
Manufacturer/Model FX921V
Power Gross at 3,600 rpm, 31 hp
23.1 kW
Air cleaner Pre-cleaner
Yes
Heavy-duty canister type with safety element
Crankcase capacity With filter, 2 U.S. qt
1.9 L
Displacement 61 cu in.
999 cc

Fuel system

Fuel type Gasoline
Fuel tank switch/shut-off valve Yes
Fuel consumption Under normal conditions, load, operation, and dependent on loads and operating conditions 1.1-1.9 U.S. gal./hr
4.2-7.2 L/hr
Fuel tank capacity 11.5 U.S. gal.
43.5 L

Key Specs

Mower deck Size 60, 72 in.
137, 183 cm
Engine Power Gross at 3,600 rpm: 31 hp
23.1 kW
Drive wheels 24x12-12
Blade tip speed Approximately 18,000 fpm
5,486 m/min
Fuel tank capacity 11.5 U.S. gal.
43.5 L/hr
Caster wheels 13x6.5-6
Warranty 36 months or 1200 hours, whichever comes first
First 24 months, no hour limitation
Transmission Hydrostatic
Engine Manufacturer/model FX921V
Speed range 0-10 mph
0-16.1 km/h

Mower decks

Deck construction 7-Iron PRO, one-piece stamped steel with reinforcements
Size 60, 72 in.
152, 183 cm
Discharge Side, Mulch On Demand™ system
Cutting width 60, 72 in.
152, 183 cm
Height-of-cut range Increments
0.25 in.
0.64 cm
1-5.5 in.
2.54-14 cm
Deck thickness 7 gauge
0.18 in.
4.6 mm

PTO

Drive V-belt
Type Electro-magnetic, 225 lb-ft
305 Nm

Tires

Load rating 4 PR
Drive wheels 24x12-12

Wheels

Caster wheel type Flat free
Front anti-scalp rollers RH, center, LH
Rear anti-scalp rollers Optional
Caster wheels 13x6.5-6

Additional information

Date collected 11-Sep-2018

John Deere Z960M Image Gallery