Specifications

Blades

Length Varies by deck size
Number Three
Blade tip speed Approximately 18,000 fpm
5,486 m/min
Thickness 0.25 in.
0.64 cm

Brakes

Dynamic braking Twin levers
Park brake Internal wet disk integrated in the transmission
Park brake actuation Foot brake

Buyer's note

Warranty 36 months or 1500 hours, whichever comes first
First 24 months, no hour limitation

Dimensions

Length 84 in.
213 cm
Weight 1,273 to 1,310 lb
577 to 594 kg
Height With ROPS up, 73 in.
185 cm
With ROPS down, 47 in.
119 cm
Width With chute down, 68, 74 in.
173, 188 cm

Drivetrain

Wheel motors Tuff Torq heavy-duty integrated piston wheel motor
Speed and direction control Twin levers
Filter Internal, replaceable
Transmission Hydrostatic
Travel speed Speed range
0-12 mph
0-19.3 km/h
Forward
0-12 mph
0-19.3 km/h
Reverse
0-4.5 mph
0-7.2 km/h
Hydraulic capacity 5.9 U.S. qt
5.6 L

Electrical system

Charge system 20 amp
Battery voltage 12 V
Cold cranking amp 300 amp
Hour meter Standard, digital
Operator presence starting system Brake-N-Go (foot)

Engine

Cylinders Two
Oil filter Full flow, replaceable
Lubrication Full pressure
Cooling Air
Manufacturer/Model FX801V
Power Gross at 3,600 rpm, 25.5 rpm
19 kW
Displacement 52 cu in.
852 cc
Crankcase capacity With filter, 2 U.S. qt
1.9 L
Air cleaner Pre-cleaner
Yes
Heavy-duty canister type with safety element

Fuel system

Fuel type Gasoline
Fuel tank switch/shut-off valve Yes
Fuel consumption Under normal conditions, load, operation, and dependent on loads and operating conditions 1.1-1.9 U.S. gal./hr
4.2-7.2 L/hr
Fuel tank capacity 11.5 U.S. gal.
43.5 L

Key Specs

Warranty 36 months or 1500 hours, whichever comes first
First 24 months, no hour limitation
Mower deck Size 54, 60 in.
137, 152 cm
Drive wheels 24x12-12
Blade tip speed Approximately 18,000 fpm
5,486 m/min
Caster wheels 13x6.5-6
Engine Power Gross at 3,600 rpm: 25.5 hp
19 kW
Engine Manufacturer/model FX801V
Fuel tank capacity 11.5 U.S. gal.
43.5 L
Speed range 0-12 mph
0-19.3 km/h
Transmission Hydrostatic

Mower decks

Deck construction 7-Iron PRO, one-piece stamped steel with reinforcements
Size 54, 60 in.
137, 152 cm
Height-of-cut range Increments
0.25 in.
0.64 cm
1-5.5 in.
2.54-14 cm
Discharge Side, Mulch On Demand™ system
Deck thickness 7 gauge
0.18 in.
4.6 mm
Cutting width 54, 60 in.
137, 152 cm

PTO

Drive V-belt
Type Electro-magnetic, 225 lb-ft
305 Nm

Tires

Load rating 4 PR
Drive wheels 24x12-12

Wheels

Caster wheel type Flat free
Front anti-scalp rollers RH, center, LH
Rear anti-scalp rollers Optional
Caster wheels 13x6.5-6

Additional information

Date collected 11-Sep-2018

John Deere Z930R Image Gallery