Key Features & Specs
- 7-Iron™ PRO Mowing Deck
- Mulch On Demand™ Available
- Gasoline Engine
- California CARB Approved
- 7-Iron™ PRO Mulch On Demand deck options n/a
- Rear Discharge Deck options n/a
- HP* 23.5 (17.5 kW)
- Fuel options Gasoline
- 7-Iron™ PRO side discharge deck options 48", 54"
- 7-Iron™ II side discharge deck options n/a
Specifications
Blades
Length | Varies by deck size |
Number | Three |
Blade tip speed | Approximately 18,000 fpm 5,486 m/min |
Thickness | 0.25 in. 0.64 cm |
Brakes
Dynamic braking | Twin levers |
Park brake | Internal wet disk integrated in the transmission |
Park brake actuation | Hand brake |
Buyer's note
Warranty | 36 months or 1200 hours, whichever comes first First 24 months, no hour limitation |
Dimensions
Length | 84 in. 213 cm |
Width | With chute down, 62, 68, 74 in. 157, 173, 188 cm |
Weight | 1,220 to 1,283 lb 553 to 582 kg |
Height | With ROPS up, 73 in. 185 cm With ROPS down, 47 in. 119 cm |
Drivetrain
Wheel motors | Tuff Torq heavy-duty integrated piston wheel motor |
Speed and direction control | Twin levers |
Filter | Internal, replaceable |
Transmission | Hydrostatic |
Hydraulic capacity | 5.9 U.S. qt 5.6 L |
Travel speed | Speed range 0-10 mph 0-16.1 km/h Forward 0-10 mph 0-16.1 km/h Reverse 0-4.5 mph 0-7.2 km/h |
Electrical system
Charge system | 20 amp |
Battery voltage | 12 V |
Cold cranking amp | 300 amp |
Hour meter | Standard, digital |
Operator presence starting system | Brake-N-Go (hand) |
Engine
Cylinders | Two |
Oil filter | Full flow, replaceable |
Lubrication | Full pressure |
Cooling | Air |
Power | Gross at 3,600 rpm: 23.5 hp 17.5 kW |
Manufacturer/Model | FX730V |
Air cleaner | Pre-cleaner Yes Heavy-duty canister type with safety element |
Displacement | 44.3 cu in. 726 cc |
Crankcase capacity | With filter, 2 U.S. qt 1.9 L |
Fuel system
Fuel type | Gasoline |
Fuel tank switch/shut-off valve | Yes |
Fuel tank capacity | 11.5 U.S. gal. 43.5 L |
Fuel consumption | Under normal conditions, load, operation, and dependent on loads and operating conditions 1.1-1.9 U.S. gal./hr 4.2-7.2 L/hr |
Key Specs
Engine Manufacturer/model | FX730V |
Drive wheels | 24x9.5-12 (48 in.), 24x12-12 (54 in., 60 in.) |
Blade tip speed | Approximately 18,000 fpm 5,486 m/min |
Caster wheels | 13x6.5-6 |
Engine Power | Gross at 3,600 rpm: 23.5 hp 17.5 kW |
Fuel tank capacity | 11.5 U.S. gal. 43.5 L |
Warranty | 36 months or 1200 hours, whichever comes first First 24 months, no hour limitation |
Mower deck Size | 48, 54, 60 in. 122, 137, 152 cm |
Transmission | Hydrostatic |
Speed range | 0-10 mph 0-16.1 km/h |
Mower decks
Deck construction | 7-Iron PRO, one-piece stamped steel with reinforcements |
Size | 48, 54, 60 in. 122, 137, 152 cm |
Height-of-cut range | Increments 0.25 in. 0.64 cm 1-5.5 in. 2.54-14 cm |
Cutting width | 48, 54, 60 in. 122, 137, 152 cm |
Deck thickness | 7 gauge 0.18 in. 4.6 mm |
Discharge | Side, Mulch On Demand™ system |
PTO
Drive | V-belt |
Type | Electro-magnetic, 200 lb-ft 271 Nm |
Tires
Load rating | 4 PR |
Drive wheels | 24x9.5-12 (48 in.), 24x12-12 (54 in., 60 in.) |
Wheels
Caster wheel type | Flat free |
Front anti-scalp rollers | RH, center, LH |
Rear anti-scalp rollers | Optional |
Caster wheels | 13x6.5-6 |
Additional information
Date collected | 11-Sep-2018 |