Key Features & Specs
- 34.5-hp (25.7-kW) EFI
- 60” 7Iron™ PRO deck
- Mow up to 12 mph
- Warranty: 36 months or 1500 hours, which ever comes first; First 24 months, no hour limitation**
- HP* 34.5-hp (25.7-kW)
- Features 12-gallon fuel tank, 24" foot platform
- Deck Size 60"
- Fuel Options Gas
- Deck 7Iron™ PRO
Specifications
Blades
Thickness | 0.25 in. 0.64 cm |
Number | Three |
Blade tip speed | Approximately 18,000 fpm 5486 m/min |
Brakes
Park brake | Internal wet disk |
Park brake actuation | Hand lever |
Dynamic braking | Dual hand-controlled levers |
Buyer's note
Warranty | 36 months or 1500 hours, whichever comes first. First 24 months, no hour limitation. |
Dimensions
Weight | 1165 lb 528 kg |
Width | With chute down, 74 in. 188 cm |
Height | 49 in. 124 cm |
Length | Foot platform up, 70 in. 183 cm Foot platform down, 74.75 in. 190 cm |
Drivetrain
Hydraulic pumps | 0.79 cu in. 13 cc |
Filter | Two internal and replaceable |
Travel speed | Speed range 0-12 mph 0-19.3 km/h Forward Infinite, 0-12 mph Infinite, 0-19.3 km/h Reverse Infinite, 0-6 mph Infinite, 0-9.7 km/h |
Hydraulic oil cooler | Two 8.5 in. (22 cm) fans |
Hydraulic capacity | 6.0 U.S qt 5.7 L |
Wheel motors | 13 cu in. 213 cc |
Transmission | Tuff Torq TZT13 IHT |
Speed and direction control | Twin hand-controlled levers |
Electrical system
Operator presence starting system | Yes |
Hour meter | Display panel including hour meter, fuel level, engine speed, system voltage, low engine oil pressure indicator, starting interlock indicators (PTO, operator presence, park brake), caution warning, stop warning, and on-board diagnostics |
Battery voltage | 12 V |
Charge system | At 3,600 rpm 30A |
Cold cranking amp | 300 CCA |
Engine
Cylinders | Two, V-twin |
Displacement | 50.2 cu in. 822 cc |
Lubrication | Full pressure |
Crankcase capacity | With filter, 2.2 qt 2.1 L |
Cooling | Forced air, with integrated clean out ports and oil cooler |
Power | Gross at 3,600 rpm: 34.5 hp 25.7 kW |
Air cleaner | Heavy-duty canister type with safety element |
Oil filter | Full flow, replaceable |
Manufacturer/Model | FX820V EFI |
Fuel system
Fuel tank switch/shut-off valve | No |
Fuel tank capacity | 12 U.S. gal. 45.3 L |
Fuel type | Gasoline |
Key Specs
Engine Manufacturer/model | FX820V EFI |
Speed range | 0-12 mph 0-19.3 km/h |
Blade tip speed | Approximately 18,000 fpm 5486 m/min |
Fuel tank capacity | 12 U.S. gal. 45.3 L |
Caster wheels | 13x5-6 |
Drive wheels | 24x12-12 pneumatic 24x12N12 Tweel |
Transmission | Tuff Torq TZT13 IHT |
Engine power | Gross at 3,600 rpm: 34.5 hp 25.7 kW |
Warranty | 36 months or 1500 hours, whichever comes first. First 24 months, no hour limitation. |
Mower deck size | 60-in. (152-cm) 7Iron™ PRO side-discharge |
Mower decks
Size | 60-in. (152-cm) 7Iron™ PRO side-discharge |
Deck thickness | 7 gauge 0.180 in. 4.6 mm |
Height-of-cut range | Increments 0.25 in. 0.64 cm 1.5-5 in. 3.8-12.7 cm |
Cutting width | 60-in. (152-cm) 7Iron™ PRO side-discharge |
Discharge | Side |
Deck construction | 7-Iron™ PRO: one-piece forged steel |
PTO
Type | Electro-magnetic with brake, 225 lb-ft 305 Nm |
Drive | V-belt |
Tires
Load rating | 4 PR |
Drive wheels | 24x12-12 pneumatic 24x12N12 Tweel |
Wheels
Caster wheel type | Flat free |
Front anti-scalp rollers | RH, center, LH |
Caster wheels | 13x5-6 |
Additional information
Date collected | 28-Aug-2023 |