Specifications

Blades

Blade tip speed Approximately 18,000 fpm
5486 m/min
Number Three
Thickness 0.25 in.
0.64 cm

Brakes

Dynamic braking Dual hand-controlled levers
Park brake Internal wet disk
Park brake actuation Hand lever

Buyer's note

Warranty 36 months or 1200 hours, whichever comes first.
First 24 months, no hour limitation.

Dimensions

Length Foot platform up, 67.25 in.
171 cm
Foot platform down, 72 in.
183 cm
Width With chute down, 62, 68, 74 in.
157, 173, 188 cm
Weight 1045 lb
474 (48 in.)
1070 lb
485 kg (54 in.)
1095 lb
497 kg (60 in.)
Height 48 in.
122 cm

Drivetrain

Speed and direction control Twin hand-controlled levers
Hydraulic oil cooler Two 8.5 in. (22 cm) fans
Hydraulic pumps 0.79 cu in.
13 cc
Filter Two internal and replaceable
Wheel motors 13 cu in.
213 cc
Transmission Tuff Torq TZT13 IHT
Travel speed Speed range
0-10 mph
0-16.1 km/h
Forward
Infinite, 0-10 mph
Infinite, 0-16.1 km/h
Reverse
Infinite, 0-5 mph
Infinite, 0-8.0 km/h
Hydraulic capacity 6.0 U.S qt
5.7 L

Electrical system

Hour meter Display panel including hour meter, fuel level, engine speed, system voltage, low engine oil pressure indicator, starting interlock indicators (PTO, operator presence, park brake), caution warning, stop warning, and on-board diagnostics
Charge system At 3,600 rpm 20A
Battery voltage 12 V
Operator presence starting system Yes
Cold cranking amp 300 CCA

Engine

Crankcase capacity With filter, 2.2 qt
2.1 L
Air cleaner Heavy-duty canister type with safety element
Manufacturer/Model FX730V
Oil filter Full flow, replaceable
Lubrication Full pressure
Cylinders Two, V-twin
Power Gross at 3,600 rpm: 23.5 hp
17.5 kW
Displacement 44.3 cu in.
726 cc
Cooling Forced air, with integrated clean out ports

Fuel system

Fuel type Gasoline
Fuel tank capacity 12 U.S. gal.
45.3 L
Fuel tank switch/shut-off valve No

Key Specs

Speed range 0-10 mph
0-16.1 km/h
Transmission Tuff Torq TZT13 IHT
Caster wheels 13x5-6
Warranty 36 months or 1200 hours, whichever comes first.
First 24 months, no hour limitation.
Fuel tank capacity 12 U.S. gal.
45.3 L
Blade tip speed Approximately 18,000 fpm
5486 m/min
Engine Manufacturer/model FX730V
Drive wheels 22x10-12 pneumatic (48 in.)
22x12-12 pneumatic (54 in., 60 in.)
22x11N12 Tweel
Mower deck size 48-in. (122-cm) 7Iron™ PRO side-discharge
54-in. (137-cm) 7Iron™ PRO side-discharge
60-in. (152-cm) 7Iron™ PRO side-discharge
Engine power Gross at 3,600 rpm: 23.5 hp
17.5 kW

Mower decks

Deck thickness 7 gauge
0.180 in.
4.6 mm
Discharge Side
Height-of-cut range Increments
0.25 in.
0.64 cm
1.5-5 in.
3.8-12.7 cm
Deck construction 7-Iron™ PRO: one-piece forged steel
Size 48-in. (122-cm) 7Iron™ PRO side-discharge
54-in. (137-cm) 7Iron™ PRO side-discharge
60-in. (152-cm) 7Iron™ PRO side-discharge
Cutting width 48-in. (122-cm) 7Iron™ PRO side-discharge
54-in. (137-cm) 7Iron™ PRO side-discharge
60-in. (152-cm) 7Iron™ PRO side-discharge

PTO

Drive V-belt
Type Electro-magnetic with brake, 125 lb-ft
169 Nm (48 in.)
Electro-magnetic with brake, 200 lb-ft
271 Nm (54 in., 60in.)

Tires

Load rating 4 PR
Drive wheels 22x10-12 pneumatic (48 in.)
22x12-12 pneumatic (54 in., 60 in.)
22x11N12 Tweel

Wheels

Front anti-scalp rollers RH, center, LH
Caster wheel type Flat free
Caster wheels 13x5-6

Additional information

Date collected 28-Aug-2023

John Deere Q820M Image Gallery