Specifications

Brakes

Individual turn brakes Standard
Type Internal wet disk
Master brake Standard, locking

Buyer's notes

Warranty 24 months

Dimensions

Overall height with ROPS folded 59 in.
150 cm
Length Less mower deck, 86.7 in.
220.2 cm
Overall height with ROPS 83.7 in.
213 cm
Overall width 55.5 in.
141 cm
Ground clearance 7 in.
17.8 cm
ROPS Standard (folded)
Wheelbase 49.2 in.
125 cm
ROPS certification 2-POST: OSHA 1928; Canadian Std.: CSA-352; 4-POST: SAE J2194; EU Standard: 86/298/EEC; ISO 21299:2009
Shipping weight Net weight, without mower or fuel, 2,120 lb
962 kg

Drivetrain

Cruise control Optional
Hi/Lo range Yes, Dual speed transmission
Transmission Hydrostatic full time 4WD, on-demand
Speed and direction control Two-pedal foot

Engine

Cylinders Three
Air cleaner Dual element dry type
Manufacturer/model 3TNV88C
Injection Direct
Maximum torque At 1,950 rpm, 80.4 lb-ft
109 Nm
Air restriction indicator Standard
Displacement 100.2 cu in.
1.64 L
Alternator, amp 75 amp
Battery 12 V
Fuel type Diesel (B20 compatible)
Charging system Automotive type
Power
Gross
PS, 37.4 hp
27.5 kW
Fuel tank capacity 16 U.S. gal.
60.6 L
Cooling Liquid
Cooling capacity 8 U.S. qt
7.6 L
Rated engine rpm 3,000 rpm

Hydraulics

Pump capacity 6.3 U.S. gpm
23.8 L/min
Type Open center
Lift cylinders Two
Spool valve Front lift, standard

Key Specs

Engine Power Gross PS: 37.4 hp
27.5 kW
Mower deck Size 60, 72 in.
152, 183 cm
Blade tip speed 18,000 fpm
5,486 m/min
Drive wheels 26x12-12
Warranty 24 months
Transmission Hydrostatic full time 4WD, on-demand
Speed range 0-15 mph
0-24 km/h
Fuel tank capacity 16 U.S. gal.
60.6 L
Engine Manufacturer/model 3TNV88C
Caster wheels Flat free, 11x4-5

Mower deck (rear discharge)

Caster wheels Type
Flat free
Size
11x4-5
Cutting width 62, 72 in.
157, 183 cm
Cutting height 1-6 in.
2.54-15.24 cm

Mower decks

Size 60, 72 in.
152, 183 cm
Rear anti-scalp rollers Yes, gauge wheels
Caster wheels Type
Flat free
Size
11x4-5
Belt tensioning Spring loaded
Deck offset Yes
Deck thickness 7 gauge
0.18 in.
4.6 mm
Construction One-piece stamped steel; 7-Iron PRO
Front anti-Scalp rollers Yes, gauge wheels
Blade tip speed 18,000 fpm
5,486 m/min
Cutting height 1-6 in.
2.54-15.24 cm

Steering

Type Hydraulic cylinder
Turns lock-to-lock 2 maximum, 1.5 minimum

Tires

Drive wheels 26x12-12
Steering 20x10-10

Travel speed

Speed range 0-15 mph
0-24 km/h
4-wheel drive

Weight transfer

Type Optional hydraulic

Additional information

Date collected 05-Jan-2018