Specifications

Brakes

Type Internal wet disk
Individual turn brakes Standard
Master brake Standard, locking

Buyer's notes

Warranty 24 months

Dimensions

ROPS Standard (folding)
ROPS certification 2-POST: OSHA 1928; Canadian Std.: CSA-352; 4-POST: SAE J2194; EU Standard: 86/298/EEC; ISO 21299:2009
Ground clearance 6.5 in.
16.5 cm
Overall width With 23x10.5 tires, 51.7 in.
131.3 cm
Length Less mower deck, 86.7 in.
220.2 cm
Wheelbase 49.2 in.
125 cm
Overall height with ROPS 82.7 in.
210 cm
Overall height with ROPS folded 58 in.
147 cm
Shipping weight Net weight, 2wd without mower or fuel, 1,675 lb
760 kg
Net weight, 4wd without mower or fuel, 1,835 lb
832 kg

Drivetrain

Transmission Hydrostatic 2WD, optional full time or on demand 4WD
Hi/Lo range No, single speed transmission
Speed and direction control Two-pedal foot
Cruise control Optional

Engine

Rated engine rpm 3,000 rpm
Cylinders Three
Injection Indirect
Fuel type Diesel (optional kit permits B20 compatibility)
Cooling Liquid
Air cleaner Dual element dry type
Air restriction indicator Standard
Charging system Automotive type
Alternator, amp 75 amp
Battery 12 V
Manufacturer/model 3TNV80F
Fuel tank capacity 16 U.S. gal.
60.6 L
Maximum torque At 1,900 rpm, 47.2 lb-ft
64 Nm
Cooling capacity 7.5 U.S. qt
7.1 L
Power
Gross
PS, 24.2 hp
17.8 kW
Displacement 77 cu in.
1.26 L

Hydraulics

Type Open center
Spool valve Front lift, standard
Lift cylinders Two
Pump capacity 5.1 U.S. gpm
19.3 L/min

Key Specs

Warranty 24 monhts
Speed range 0-12 mph
0-19.3 km/h
Blade tip speed 18,000 fpm
5,486 m/min
Fuel tank capacity 16 U.S. gal.
60.6 L
Engine Manufacturer/model 3TNV80F
Mower deck Size 60, 72 in.
152, 183 cm
Engine Power Gross PS, 24.2 hp
17.8 kW
Drive wheels 23x10.5-12, Optional: 23x8.5-12
Caster wheels Flat free, 11x4-5
Transmission Hydrostatic 2WD, optional full time or on demand 4WD

Mower deck (rear discharge)

Cutting width 62, 72 in.
157, 183 cm
Cutting height 1-6 in.
2.5-15.2 cm
Caster wheels Type
Flat free
Size
11x4-5

Mower decks

Blade tip speed 18,000 fpm
5,486 m/min
Deck thickness 7 gauge
0.18 in.
4.6 mm
Belt tensioning Spring loaded
Construction One-piece stamped: 7-Iron PRO
Cutting height 1-6 in.
2.54-15.24 cm
Front anti-Scalp rollers Yes, gauge wheels
Caster wheels Type
Flat free
Size
11x4-5
Deck offset Yes
Rear anti-scalp rollers Yes, gauge wheels
Size 60, 72 in.
152, 183 cm

Steering

Type Hydraulic cylinder
Turns lock-to-lock 2 maximum, 1.5 minimum

Tires

Steering 18x8.5-8 (2WD), 18x8.5-10 (4WD)
Drive wheels 23x10.5-12, Optional: 23x8.5-12

Travel speed

Hi forward 0-12 mph
0-19.3 km/h
Hi reverse 0-5 mph
0-8 km/h
4-wheel drive

Weight transfer

Type Optional hydraulic

Additional information

Date collected 21-June-2019