Crankcase oil volume 43.5 L
11.5 U.S. gal.
Fuel tank 1,514 L
400 U.S. gal.
Diesel exhaust fluid (DEF) tank 83 L
22 U.S. gal.
Cooling system 62 L
16.3 U.S. gal.
Transmission-hydraulic system With 3-point hitch and PTO: 227 L
60 U.S. gal.
Without 3-point hitch and PTO: 220 L
58 U.S. gal.


Wheelbase 3912 mm
154 in.
Overall length With front weights, excluding hitch and coupler: 7,697 mm
303 in.
With front weights, including hitch and coupler: 8,416 mm
331.3 in.
Drawbar clearance Group 48 tires: 419.1 mm
16.5 in.
Approximate shipping weight, Open;Cab 19,690 kg
43,420 lb


Drawbar category Category 5
Maximum vertical load 5,440 kg
12,000 lb

Electrical system

Alternator size Standard: 200 amp
Optional: 240 amp
Battery options 12 V
Total cold cranking amps 925 CCA

Engine performance

Rated power 419 kW
570 hp
Rated PTO power (hp SAE) 249 kW
335 hp
Power boost (available in transport and/or mobile PTO applications) 10 percent
Engine peak torque At 1600 rpm: 2,631 Nm
380 lb-ft
PTO torque rise 38 percent

Engine specifications

Description Cummins QSX15 (B20 diesel compatible)
Engine type Diesel, in-line, 6-cylinder, wet-sleeve cylinder liners with 4 valves-in-head
Rated speed 2,100 rpm
Aspiration Single Variable geometry turbocharger with air-to-air aftercooling and cooled exhaust gas recirculation
Emission level Final Tier 4
After treatment type DOC/DPF/SCR
Displacement 14.9 L
912 cu in.

Front axle

Type Standard: Diameter: 120 x 3,048 mm
4.72 x 120 in.
Front axle differential lock Full-locking electrohydraulic

Hydraulic system

Pump rated output Standard: 220 L/min
58 gpm
Optional: 435 L/min
115 gpm
Available flow at a single rear SCV 0.5 in. couplers: 132 L/min
35 gpm
Number of rear selective controls valves (SCVs) Standard: ISO Couplers: 4-6
Optional: ISO Couplers: 7-8 (field installed)
SCV control Electronic


Country of manufacture USA

Operator station

Seat Standard: ComfortCommand™
Optional: ActiveSeat™
Instuctional seat Standard
Display Standard: 4100 Generation 4 CommandCenter™ with 7 in. display
Optional: 4600 Generation 4 CommandCenter with 10 in. display
Radio Standard: AM/FM stereo with weatherband, remote controls, auxiliary input jack, four speakers and external antenna
Inner cab volume 3.597 m3
127 cu ft
Cab glass area 6.52 m2
70.18 sq ft
Rollover protective structure, OOS <br/><br/>

Precision AG

Guidance AutoTrac Ready
Telematic Available with JDLink™ hardware, activations, and Ethernet Harnesses (availability dependent upon destination)
Remote diagnostics Available with activated JDLink™ hardware and activations

Rear axle

Type Standard: Diameter: 120 x 3,048 mm
4.72 x 120 in.
Final drive type Inboard planetary with double-reduction axle
Rear differential lock Full-locking electrohydraulic

Rear hitch

Hitch category (SAE designation) Category 4N/4: 6,804 kg
15,000 lb
Category 4N/4: 9,072 kg
20,000 lb
Maximum lift capacity behind lift points Category 4N/4: 9,072 kg
20,000 lb
Sensing type Electrohydraulic with draft sensing

Rear power take-off (PTO)

Type Independent
44 mm (1.75 in.) 20-spline, 1,000 rpm


Interval for engine oil change 400 hours
Interval for hydraulic/transmission oil change 1,500 hours
Interval for engine coolant change 6,000 hours

Standard tires

Turning radius without brakes Group 47 tires: 6,035 mm
19.8 ft


Type Standard: Hydraulic power-steering
Optional: ActiveCommand™ Steering (ACS)


Type Standard: John Deere e18™ 18-speed PowerShift with Efficiency Manager™: 40 km/h
25 mph


Maximum ballast level 27,216 kg
60,000 lb
Base machine weight <br/><br/>19,690 kg<br/>43,420 lb