Specifications

Capacities

Crankcase oil volume 48 L
12.7 U.S. gal.
Fuel tank 1,514 L
400 U.S. gal.
Diesel exhaust fluid (DEF) tank 83 L
22 U.S. gal.
Cooling system 56.5 L
14.9 U.S. gal.
Transmission-hydraulic system With 3-point hitch and PTO: 227 L
60 U.S. gal.
Without 3-point hitch and PTO: 220 L
58 U.S. gal.

Dimensions

Wheelbase 4,128 mm
162.5 in.
Overall length Excluding hitch: 7,637 mm
300.7 in.
Including hitch and coupler: 8,217 mm
323.5 in.
Drawbar clearance 403 mm
15.9 in.
Approximate shipping weight, Open;Cab 24,494 kg
54,000 lb

Drawbar

Drawbar category Standard: Category 5
Optional: Category 5 with heavy duty support
Category 4 conversion kit
Maximum vertical load Standard: 5,440 kg
12,000 lb

Electrical system

Alternator size Standard: 200 amp
Optional: 240 amp
Battery options 12 V
Total cold cranking amps 925 CCA

Engine performance

Rated power 309 kW
420 hp
Rated PTO power (hp SAE) At 2,100 engine rpm: 249 kW
335 hp
Power boost (available in transport and/or mobile PTO applications) 10 percent
Engine peak torque At 1,600 rpm: 1,938 Nm
380 lb-ft
PTO torque rise 38 percent

Engine specifications

Description John Deere PowerTech™ PSS 13.5L (B20 diesel compatible)
Engine type Diesel, in-line, 6-cylinder, wet-sleeve cylinder liners with 4 valves-in-head
Engine family JJDXL13.5310
Rated speed 2,100 rpm
Aspiration Dual series turbocharger with fixed geometry first stage-variable geometry second stage - air-to-air aftercooling and cooled exhaust gas recirculation
Emission level Final Tier 4
After treatment type DOC/DPF/SCR
Displacement 13.5 L
824 cu in.

Front axle

Front axle differential lock Full-locking electrohydraulic

Hydraulic system

Type Closed-center, pressure/flow compensated
Pump rated output Standard: 220 L/min
58 gpm
Optional: 435 L/min
115 gpm
Available flow at a single rear SCV 0.5 in. couplers: 132 L/min
35 gpm
Number of rear selective controls valves (SCVs) Standard: ISO Couplers: 4-6
Optional: ISO Couplers: 7-8 (field installed)
SCV control Electronic

Miscellaneous

Country of manufacture USA

Operator station

Seat ComfortCommand™
Cab suspension Standard
Instuctional seat Standard
Display Standard: 4100 Generation 4 CommandCenter™ with 7 in. display
Optional: 4600 Generation 4 CommandCenter™ with 10 in. display
Radio Standard: AM/FM stereo with weatherband, remote controls, auxiliary input jack, four speakers and external antenna
Inner cab volume 3.597 m3
127 cu ft
Cab glass area 6.52 m2
70.18 sq ft

Precision AG

Guidance AutoTrac™ Ready
Telematic Available with JDLink™ hardware, activations, and Ethernet Harnesses (availability dependent upon destination)
Remote diagnostics Available with activated JDLink hardware and activations

Rear axle

Final drive type Bull gear and double idler with floating pinion
Rear differential lock Full-locking electrohydraulic

Rear hitch

Hitch category (SAE designation) Category 4N/3: 6,804 kg
15,000 lb
Category 4N/3: 9,072 kg
20,000 lb
Category 4N/4: 6,804 kg
Category 4N/4: 9,072 kg
Maximum lift capacity behind lift points Category 4N/4: 9,072 kg
20,000 lb
Sensing type Electrohydraulic with draft sensing

Rear power take-off (PTO)

Type Independent
44 mm (1.75 in.) 20-spline, 1,000 rpm

Serviceability

Interval for engine oil change 400 hours
Interval for hydraulic/transmission oil change 1,500 hours
Interval for engine coolant change 6,000 hours

Standard tires

Front Tracks: 457 mm
18 in.
Tracks: 609 mm
24 in.
Rear Tracks: 457 mm
18 in.
Tracks: 609 mm
24 in.
Wheel tread range NArrow undercarriage: 2032 mm
80 in.
2235 mm
88 in.
3048 mm
120 in.
Turning radius without brakes 6,400 mm
21 ft

Steering

Type Standard: Hydraulic power-steering
Optional: ActiveCommand™ Steering (ACS)

Transmission

Type Standard: John Deere e18™ 18-speed PowerShift with Efficiency Manager™: 40 km/h
25 mph

Weight

Base machine weight 24,494 kg
54,000 lb
Maximum ballast level 28,122 kg
62,000 lb

Additional information

Date collected 23-May-17