Specifications

Capacities

Cooling system 28 L
7.4 U.S. gal.
Transmission-hydraulic system IVT: 60 L
15.9 U.S. gal.
AutoQuad: 53 L
14 U.S. gal.
Diesel exhaust fluid (DEF) tank 13 L
3.4 U.S. gal.
Crankcase oil volume 16 L
4.2 U.S. gal.
Fuel tank 195 L
51.5 U.S. gal.

Dimensions

Front axle center 481 mm
18.9 in.
Overall length 4533 mm
178.5 in.
Approximate shipping weight, Open;Cab 6100 kg
13,448 lb
Overall height 2886 mm
113.6 in.
Wheelbase MFWD: 2580 mm
102 in.
Overall width 1680 mm
66.1 in.

Drawbar

Maximum vertical load Category 2: 1400-2450 kg
3085-5400 lb
Maximum vertical load dependent on drawbar position
Drawbar category Category 2

Electrical system

Total cold cranking amps 1200 CCA
Working lights Standard: 14 halogen
Optional: 12 light-emitting diode (LED) plus two halogen
Battery options 12 V
Type of bulb in headlight (Halogen, Zenon, LED) Standard: 65-W halogen W
Optional: LED
Alternator size Standard: 120 amp
Optional: 250 amp

Engine performance

Engine peak torque At 1600 rpm: 562 Nm
415 lb-ft
Maximum engine power PS (hp ISO) at max engine speed (EU 2016/1628) 97/68EC: 97 kW
130 hp
PTO torque rise 40 percent
Intelligent Power Management (IPM) Transport and/or mobile PTO applications
Additional engine power (hp ISO) at 2100 rpm: 14.9 kW 20 hp
Rated engine power PS (hp ISO) at rated engine speed (EU 2016/1628) 97/68EC: 88 kW
120 hp
Rated PTO power (hp SAE) 68 kW
91 hp
Power boost 10 percent

Engine specifications

After treatment type DOC/DPF/SCR
Displacement 4.5 L
275 cu in.
Description John Deere PowerTech™ PSS
Aspiration Turbocharged, fixed geometry first stage-variable geometry second stage, air-to-air aftercooling and cooled exhaust gas recirculation
Engine family NJDXL06.8324
Rated speed 2100 rpm
Engine type Diesel, in-line, 4-cylinder, wet-sleeve cylinder liners with four valves in head
Emission level Final Tier 4

Front axle

Front axle differential lock MFWD: Limited slip
TLS: Limited slip
TLS with brakes: Full-locking electrohydraulic

Front hitch

PTO speed Engine at PTO speed (1000): 1969 rpm
Electric power Seven-pin electrical socket
Optional: Three-pin and ISOBUS socket
Category Category 3N
Front power take-off (PTO) 1000 rpm, clockwise rotation (from driving position)
Standard lift capacity At hook ends: 3300 kg
7275 lb

Hydraulic system

Pump rated output Standard: 45 cc pump: 114 L/min
30 gpm
Available flow at a single rear SCV 100 L/min
26 gpm
Number of mid selective control valves (SCVs) Up to three
Number of rear selective control valves (SCVs) Standard: Three ISO couplers
Optional: Three to five ISO couplers
SCV control Standard: Mechanical
Optional: Electronic
Type Closed-center, pressure-and-flow compensated
Joystick SCV control Available

Key Specs

Rated engine power PS (hp ISO) at rated engine speed (EU 2016/1628) 97/68EC: 88 kW
120 hp
Rated PTO power (hp SAE) 68 kW
91 hp
Base machine weight 6100 kg
13,448 lb
Engine displacement 4.5 L
275 cu in.
Rear hitch category (SAE designation) Standard: Category 2/3N: 3600 kg
7937 lb
Optional: Category 2/3N: 4100 kg
9039 lb
Engine description John Deere PowerTech™ PSS
Hydraulic pump rated output Standard: 45 cc pump: 114 L/min
30 gpm
Maximum engine power PS (hp ISO) at max engine speed (EU 2016/1628) 97/68EC: 97 kW
130 hp

Loaders

Maximum lift height 620R: 4124 mm
162 in.
640R: 4151 mm
163 in.
Loader 620R
640R
Lift capacity at full height 620R: 2577 kg
5861 lb
640R: 2181 kg
4808 lb

Miscellaneous

Country of manufacture Germany

Operator station

dB(A) rating 71 dB
Cab suspension Optional: Adaptive Hydraulic Cab Suspension Plus (HCS Plus)
Inner cab volume 3.33 m3
117.59 cu ft
Instructional seat Standard
Cab glass area 6.11 m2
65.77 sq ft
Radio Optional
Seat Degree of seat swivel, left hand
CommandARM: 7.5 degree
Degree of seat swivel, right hand
CommandARM: 30 degree
Standard: Air suspension
Optional: Deluxe air suspension

Rear axle

Type Standard: Flange, 1552 mm 61 in.
Optional: Rack and pinion, 2550 mm 100.4 in.
Rack and pinion, 2438 mm 96 in.
Final drive type Inboard planetary three pinion
Differential controls Full-locking electrohydraulic

Rear hitch

Sensing type Electrohydraulic
Maximum lift capacity behind lift points 4100 kg
9039 lb
Rear axle differential lock Electrohydraulic
Hitch category (SAE designation) Standard: Category 2/3N: 3600 kg
7937 lb
Optional: Category 2/3N: 4100 kg
9039 lb
Remote control valves available Available: Remote control switch

Rear power take-off (PTO)

Engine rpm (at rated PTO speeds) 1967 engine rpm at 540 rpm PTO
1496 engine rpm at 540E rpm PTO
1962 engine rpm at 1000 rpm PTO
PTO actuation Electrical modulation
Type Independent
Standard: 540, 540E, 1000 rpm reversible shaft: 35 mm
1.375 in.

Serviceability

Interval for hydraulic/transmission oil change 1,500 hours
Interval for engine coolant change 6,000 hours
Interval for engine oil change 500 hours

Steering

Type Hydrostatic power

Tires

Wheel tread range MFWD: 1524-2235 mm 60-88 in.
TLS: 1524-2235 mm 60-88 in.
Rear 420/85R30 (16.9R-30)

Transmission

Creeper Available with AutoQuad
Reverser Left-hand electrical reverser
Type Standard: IVT, 0.05-42 km/h 0.03-26 mph
Optional: IVT, 0.05-50 km/h 0.03-31 mph
24-speed AutoQuad PLUS ECO (40K)
24-speed AutoQuad PLUS ECO (50K)

Weight

Base machine weight Front axle
2440 kg
5379 lb
Rear axle
3660 kg
8069 lb
Total
TLS, AutoQuad, 600/65R38, 540/65R24, shipping fuel, front weight support: 5470 kg
12,059 lb
TLS, IVT, 600/65R38, 540/65R24, shipping fuel, front weight support: 6091 kg
13,428 lb
6100 kg
13,448 lb
Maximum permissible weight 9950 kg
21,936 lb

Additional information

Date collected 12-Nov-21