Specifications

Capacities

Transmission-hydraulic system 58 L
15.3 U.S. gal.
Crankcase oil volume 15 L
4 U.S. gal.
Fuel tank 168 L
44.4 U.S. gal.
Cooling system Open station: 18.6 L
4.7 U.S. gal.
Cab: 19.1 L
5 U.S. gal.

Dimensions

Approximate shipping weight, Open;Cab MFWD Cab: 4645 kg
10,240 lb
Wheelbase MFWD: 2450 mm
96.5 in.

Drawbar

Drawbar category Standard: Category 2
Optional: Category 2 heavy duty
Maximum vertical load Standard: Category 2: 1000-1250 kg
2205-2756 lb
Optional: Category 2 heavy duty 1200-1900 kg
2645-4189 lb
Maximum vertical load dependent on drawbar position

Electrical system

Battery options 12 V
Total cold cranking amps 925 CCA
Alternator size 90 amp

Engine performance

PTO torque rise 30 percent
Rated power 97/68EC: 99 kW
135 engine hp
Engine peak torque At 1,600 rpm: 539 Nm
397 lb-ft
Rated PTO power (hp SAE) 86 kW
115 PTO hp

Engine specifications

Rated speed 2200 rpm
Emission level Final Tier 4
Aspiration Turbocharge, wastegate Turbocharger with air to air aftercooling and cooled exhaust gas recirculation
Engine family HJDXLO6.8302
After treatment type DOC/DPF/SCR
Engine type Diesel, in-line, 4-cylinder, wet-sleeve cylinder liners with 4 valves-in-head
Displacement 4.5 L
275 cu in.
Description John Deere PowerTech™ PWS (B20 Diesel Compatible)

Front axle

Type Standard: MFWD
Front axle differential lock 2WD: None
MFWD: limited slip

Hydraulic system

SCV control Mechanical
Number of rear selective control valves (SCVs) Standard: ISO Couplers 2
Optional: ISO Couplers 3
Type Open-center
Gear driven
Pump rated output 36.5 cc pump: 75.7 L/min
20 gpm
Available flow at a single rear SCV 75.7 L/min
20 gpm

Key Specs

Hydraulic pump rated output 36.5 cc pump: 75.7 L/min
20 gpm
Transmission type Standard: John Deere12F/12R PowrReverser™ Transmission: 30 km/h
19 mph
Optional: John Deere 24F/12R PowrReverser Transmission 40 km/h
25 mph
Rear hitch category (SAE designation) Standard: Category 2: 2500 kg (5500 lb) standard lift at 610mm behind hitchpoint
Optional: Category 2: 3318 kg (7300 lb) heavy duty lift at 610mm behind hitchpoint
Engine displacement 4.5 L
275 cu in.
Rated engine power 97/68EC: 99 kW
135 engine hp
Rated PTO power (hp SAE) 86 kW
115 PTO hp
Engine description John Deere PowerTech™ PWS (B20 Diesel Compatible)

Miscellaneous

Country of Manufacture Mexico

Operator station

Instructional seat Optional
Display LCD instrument cluster
Seat Standard: Mechanical suspension cloth seat
Optional: Air suspension

Rear axle

Type Flange
Rear differential lock Full-locking mechanical
Final drive type Inboard planetary

Rear hitch

Sensing type Optional
Hitch category (SAE designation) Standard: Category 2: 2500 kg (5500 lb) standard lift at 610mm behind hitchpoint
Optional: Category 2: 3318 kg (7300 lb) heavy duty lift at 610mm behind hitchpoint
Maximum lift capacity behind lift points Category 2: with heavy duty lift: 3318 kg
7300 lb

Rear power take-off (PTO)

Type Independent
Standard: 35mm (1.375 in) 540 rpm/1000 rpm reversible shaft
Engine rpm (at rated PTO speeds) 2085 engine rpm at 540 rpm PTO
2067 engine rpm at 1000 rpm PTO

Serviceability

Interval for engine coolant change 5,000 hours
Interval for engine oil change 500 hours
Interval for hydraulic/transmission oil change 1,000 hours

Steering

Type Standard: Hydrostatic power

Tires

Wheel tread range MFWD: 1516-2016 mm
59.7-79.4 in.

Transmission

Type Standard: John Deere12F/12R PowrReverser™ Transmission: 30 km/h
19 mph
Optional: John Deere 24F/12R PowrReverser Transmission 40 km/h
25 mph

Weight

Maximum ballast level 6464 kg
14250 lb

Additional information

Date collected 9-Feb-17