Bargain Barn
Key Features & Specs
- Working widths down to 43 inches
- Improved turning radius on the 5GN Series
- FT4 90 hp engine/76 hp PTO
- Two transmissions available: 12F/12R and 24F/12R
- Open Station Yes
- Cab Yes
-
Standard Transmission
12F/12R SyncReverser
- Engine HP 90 hp
-
Optional Transmission
24F/12R PowerReverser
Specifications
Capacities
| Fuel tank | Standard: 73.1 L 19.3 U.S. gal. |
Dimensions
| Overall length | 4319 mm 170 in. |
| Front axle center | Min. 226.1 mm 8.9 in. Max. 266.7 mm 10.5 in. |
| Wheelbase | 2098 mm 82.5 in. |
| Drawbar clearance | Min. 226.1 mm 8.9 in. Max. 266.7 mm 10.5 in. |
Electrical system
| Alternator size | 120 amp |
Engine performance
| Rated PTO power (hp SAE) | 59 kW 79 hp |
| Rated power | 67.1 kW 90 hp |
Engine specifications
| After treatment type | Diesel Oxidation Catalyst (DOC) and Selective Catalyst Reduction (SCR) |
| Engine family | FPTF34 |
| Emission level | Final Tier 4 |
| Cylinders liners | Wet sleeved |
| Aspiration | Turbocharged |
| Rated speed | 2300 rpm |
| Displacement | 4 cylinder: 3.4 L 207 cu in. |
| Description | 3.4L Fiat® Powertrain Technologies |
Front axle
| Front axle differential lock | Self Locking Differential |
| Type | Carraro Drivetech |
Hydraulic system
| SCV control | Mechanical |
| Type | Open Center |
| Number of rear selective control valves (SCVs) | Standard: 2 Optional: 4 |
| Pump rated output | Standard: 96.5 L/min 25.5 gpm Optional: 126.4 33.4 gpm |
| Available flow at a single rear SCV | 41.6 L/min 11 gpm |
Key Specs
| Transmission type | 24F/12R PowrReverser, EH Hi-Lo |
| Rear hitch category (SAE designation) | Category 1/Category 1N |
| Base machine weight | OOS: 2529.7 kg 5577 lb Cab: 2744.7 kg 6051 lb |
| Engine displacement | 4 cylinder: 3.4 L 207 cu in. |
| Rated PTO power (hp SAE) | 59 kW 79 hp |
| Engine description | 3.4L Fiat® Powertrain Technologies |
| Rated engine power | 67.1 kW 90 hp |
| Hydraulic pump rated output | Standard: 96.5 L/min 25.5 gpm Optional: 126.4 L/min 33.4 gpm |
Operator station
| dB(A) rating | 82 |
| Rollover protective structure, OOS | Rigid - foldable - telescopic Rigid, front folding Platform - flat/straddle Straddle Gearshift location - console/floor Floor Yes |
| Seat | OOS: standard: COBO MT SC74 M200 Optional: COBO MT SC74 M97 Cab: standard: COBO MT SC74 M200 |
Rear axle
| Axle type | Flanged |
| Final drive type | Three point inboard planetary drives |
| Differential controls | Multi disk oil cooled design |
| Rear differential lock | Electrohydraulic |
| Type | Carraro Drivetech |
| Brakes, type and control | Multi-disc rear braking |
Rear hitch
| Hitch draft control load sense type | Mechanical |
| Hitch category (SAE designation) | Category 1/Category 1N |
| Sensing type | Top Link Draft Sensing |
| Maximum lift capacity behind lift points | 2549 kg 5620 lb |
Rear power take-off (PTO)
| PTO actuation | Electrohydraulic |
| Type | Standard: 540/540E |
| Engine rpm (at rated PTO speeds) | 540 at 1938 rpm 540E at 1648 rpm |
Serviceability
| Interval for hydraulic/transmission oil change | 750 |
| Interval for engine oil change | 500 |
Steering
| Type | Dynamic Load Sensing, Hydrostatic, Flow Metering |
Tires
| Rear | 260/70 R16 |
| Front | 6.50R16 |
| Turning radius without brakes | 3627 mm 11.9 ft |
Transmission
| Creeper | Yes |
| Type | 24F/12R PowrReverser, EH Hi-Lo |
| Reverser | Yes |
| Clutch; wet/dry | Wet |
Weight
| Base machine weight | OOS: 2529.7 kg 5577 lb Cab: 2744.7 kg 6051 lb |
