Bargain Barn
Key Features & Specs
- Engine hp1: 341 Max | 310 hp Rated
- Fully integrated precision ag technology
- Choice of e23™ PowerShift or Infinitely Variable Transmission (IVT™)
- Track width options: 16.5-in., 18-in., 24-in. and 30-in.
1Engine power PS (hp ISO) at max engine power speed (ECE-R120). John Deere Standard RES10080, SAE Standards J1995.
- Ride Comfort 4-Post Cab Suspension
- PTO HP Rated: 257 hp (191 kW)
- Transmission e23 23F/11R PowerShift Transmission with Efficiency Manager; IVT available with CommandPRO control
- Hydraulics Closed-center, pressure and flow compensated with 4 standard SCV (5 and 6 available); hydraulic flow up to 84 gpm (318L)
-
Track Width and Tread Spacing
16.5 in., 18 in., 24 in., or 30 in. tracks
76 in., 80 in., 88 in., or 120 in. spacing -
Engine HP¹
Max: 341 hp (251 kW)
Rated: 310 hp (228 kW)
Specifications
Capacities
| Cooling system | 42.3 L 11.2 U.S. gal. |
| Transmission-hydraulic system | 1930-mm and 2032-mm (76-in. and 80-in.) tread: 250 L 66.1 U.S. gal. 2235-mm and 3048-mm (88-in. and 120-in.) tread: 260.6 L 68.8 U.S. gal. |
| Diesel exhaust fluid (DEF) tank | 37.2 L 9.8 U.S. gal. |
| Crankcase oil volume | 26.6 L 7 U.S. gal. |
| Fuel tank | 924 L 244 U.S. gal. |
Dimensions
| Wheelbase | 3235 mm 127.36 in. |
Electrical system
| Total cold cranking amps | 1,850 CCA |
| Battery options | 12 V |
| Alternator size | Standard: 200 amp Optional: 330 amp |
| Working lights | Standard: 18 halogen Available: 18 LED 22 LED |
| Type of bulb in headlight (Halogen, Zenon, LED) | Standard: halogen, 65 W Available: LED |
Engine performance
| Power boost | 10 percent |
| PTO torque rise | 40 percent |
| Rated power | ECE-R120: 228 kW 310 hp |
| Rated PTO power (hp SAE) | 191 kW 257 hp |
| Maximum engine power | ECE-R120: 251 kW 341 hp |
| Engine peak torque | At 1600 rpm: 1452 Nm 1070 lb-ft |
Engine specifications
| Rated speed | 2100 rpm |
| Cylinders liners | Wet-sleeve |
| Emission level | Final Tier 4 |
| After treatment type | Diesel oxidation catalyst (DOC)/diesel particulate filter (DPF)/selective catalytic reduction (SCR) |
| Aspiration | Single, variable geometry turbo; air-to-air aftercooling and cooled exhaust gas recirculation |
| Engine type | In-line six, four valve |
| Engine family | MJDXL09.0333 |
| Description | John Deere PowerTech 9.0 L (B20 diesel compatible) |
| Displacement | 9.0 L 549 cu in. |
Front axle
| Type | 1700 Series MFWD |
| Front axle differential lock | Full-locking electrohydraulic (actuated at same time as rear diff-lock) |
Hydraulic system
| Type | Closed-center, pressure/flow compensated system with load sensing |
| SCV control | Electronic |
| Available flow at front SCVs | 96 L/min 25 gpm |
| Pump rated output | Standard: 85-cc pump: 227.1 L/min 60 gpm Optional: 85-cc plus 35-cc dual pump: 318 L/min 84 gpm |
| Available flow at a single rear SCV | 1.3-cm (1/2-in.) couplers: 132 L/min 35 gpm 1.9-cm (3/4-in.) coupler: 159 L/min 42 gpm |
| Number of rear selective control valves (SCVs) | Standard: 1.3-cm (1/2-in.) ISO couplers: 4 Optional: 1.3-cm (1/2-in.) ISO couplers: 5 and 6 available 1.9-cm (3/4-in.) ISO coupler: 1 |
Key Specs
| Engine description | John Deere PowerTech™ 9.0 L (B20 diesel compatible) |
| Rated engine power | ECE-R120: 228 kW 310 hp |
| Engine displacement | 9.0 L 549 cu in. |
| Base machine weight | e23, 457-mm (18-in.) front/rear and 3048-mm (120-in.) tread: 19,600 kg 43,300 lb |
| Hydraulic pump rated output | Standard: 85-cc pump: 227.1 L/min 60 gpm Optional: 85-cc plus 35-cc dual pump: 318 L/min 84 gpm |
| Maximum engine power | ECE-R120: 251 kW 341 hp |
| Rear hitch category (SAE designation) | Standard: Category 4N/3 standard lift at 610 mm (24 in.) behind hitch point: 9072 kg 20,000 lb Optional: Category 4N/3 at 610 mm (24 in.) behind hitch point: 6803 kg 15,000 lb |
| Rated PTO power (hp SAE) | 191 kW 257 hp |
| Transmission type | Standard: e23™ PowerShift™ with Efficiency Manager™ 40K, 40 km/h 24.9 mph Optional: John Deere AutoPowr™ IVT™ 40K, 0.05-42 km/h 0.03-26 mph |
Miscellaneous
| Country of manufacture | USA |
Operator station
| Radio | Standard: AM/FM stereo with weatherband, remote controls, auxiliary input jack, four speakers and external antenna |
| Cab suspension | Standard: four-post cab suspension |
| Instructional seat | Standard |
| Display | Standard: 4600 Generation 4 CommandCenter™: 25.4 cm 10 in. |
| Seat | Degree of seat swivel, left hand 25 degree (angle) Degree of seat swivel, right hand 40 degree (angle) Standard: air suspension |
| Inner cab volume | 3.24 m3 114 cu ft |
| Cab glass area | 6.52 m2 70.18 sq ft |
Precision AG
| Remote diagnostics | JDLink hardware standard |
| Telematic | JDLink™ hardware standard, activations, and Ethernet harnesses (availability dependent upon destination) |
| Guidance | Integrated AutoTrac™ |
Rear axle
| Rear differential lock | Full-locking electrohydraulic |
| Type | Flange |
| Final drive type | Inboard planetary |
Rear hitch
| Sensing type | Electrohydraulic |
| Maximum lift capacity behind lift points | Standard (at 610-mm [24-in.] behind hitch point): 12,124 kg 26,729 lb |
| Hitch category (SAE designation) | Standard: Category 4N/3 standard lift at 610 mm (24 in.) behind hitch point: 9072 kg 20,000 lb Optional: Category 4N/3 at 610 mm (24 in.) behind hitch point: 6803 kg 15,000 lb |
Rear power take-off (PTO)
| Multispeed PTO option availability | Available: 45-mm (1.75-in.), 1000-rpm and 1000E economy rpm PTO, in-cab shiftable |
| PTO actuation | Electrohydraulic with adjustable modulation |
| Engine rpm (at rated PTO speeds) | IVT: 1,000 PTO rpm at 2,000 engine rpm, 1,000 ECO PTO at 1594 engine rpm, 540 PTO rpm at 1,814 engine rpm e23 PowerShift: 1,000 PTO rpm at 1,995 engine rpm, 1,000 ECO PTO at 1,590 engine rpm, 540 PTO rpm at 1,810 engine rpm |
| Type | Independent Standard: 44 mm (1.75 in.) 20-spline, 1,000 rpm Optional: 44 mm (1.75 in.), 20-spline, 1,000 rpm capable of 35 mm (1.375 in.) 540/1000 rpm 44 mm (1.75 in.) 20-spline, 1,000 rpm/1,000E rpm |
Serviceability
| Interval for engine coolant change | 6,000 hours |
| Interval for hydraulic/transmission oil change | 1,500 hours |
| Interval for engine oil change | 500 hours |
Steering
| Type | Standard: Hydraulic power-steering with electric pump backup |
Tires
| Turning radius without brakes | With 2032-mm (80-in.) tread setting and 419-mm (16.5-in.) front and rear tracks: 6.78 m 22.2 ft With 3048-mm (120-in.) tread setting and 610-mm (24-in.) front and rear tracks: 6.85 m 22.5 ft |
Tracks
| Mid-rollers | Front: Two Rear: Three |
| Drive type | Camso® 4500 and 6500 General Ag Series - reinforced drive lug technology |
| Tread spacing | Available: 1930.4 mm 76 in. 2032 mm 80 in. 2235.2 mm 88 in. 3048 mm 120 in. |
| Track width | Available: 419 mm 16.5 in. 457 mm 18 in. 609 mm 24 in. 762 mm 30 in. |
Transmission
| Type | Standard: e23 PowerShift with Efficiency Manager 40K, 40 km/h 24.9 mph Optional: John Deere AutoPowr IVT 40K, 0.05-42 km/h 0.03-26 mph |
Weight
| Maximum permissible weight | 24,000 kg 53,000 lb |
| Base machine weight | e23, 457-mm (18-in.) front/rear and 3048-mm (120-in.) tread: 19,600 kg 43,300 lb |
| Maximum ballast level | 20,000 kg 44,100 lb |
Additional information
| Date collected | 12 January 2022 |
