Specifications

Capacities

Crankcase oil volume 25.7 L
6.8 U.S. gal.
Diesel exhaust fluid (DEF) tank 31.3 L
8.3 U.S. gal.
Transmission-hydraulic system 197 L
52 U.S. gal.
Fuel tank 764 L
202 U.S. gal.
Cooling system 42.3 L
11.2 U.S. gal.

Drawbar

Drawbar category Standard: Category 4
Optional: Category 4 with heavy-duty support
Maximum vertical load Standard: 2245 kg
4950 lb
Optional (dependent on drawbar position): 4990 kg
11,000 lb

Electrical system

Total cold cranking amps 1,850 CCA
Battery options 12 V
Alternator size Standard: 200 amp
Optional: 330 amp
Type of bulb in headlight (Halogen, Zenon, LED) Standard: halogen, 65 W
Available: LED
Working lights Standard: 18 halogen
Available: 18 LED
22 LED

Engine performance

Power boost 10 percent
PTO torque rise 40 percent
Maximum engine power ECE-R120: 275 kW
374 hp
Rated power ECE-R120: 250 kW
340 hp
Rated PTO power (hp SAE) 211 kW
284 hp
Engine peak torque At 1600 rpm: 1592 Nm
1174 lb-ft

Engine specifications

After treatment type Diesel oxidation catalyst (DOC)/diesel particulate filter (DPF)/selective catalytic reduction (SCR)
Rated speed 2100 rpm
Cylinders liners Wet-sleeve
Aspiration Single, variable geometry turbo; air-to-air aftercooling and cooled exhaust gas recirculation
Emission level Final Tier 4
Engine family MJDXL09.0333
Description John Deere PowerTech 9.0 L (B20 diesel compatible)
Engine type In-line six, four valve
Displacement 9.0 L
549 cu in.

Hydraulic system

SCV control Electronic
Type Closed-center, pressure/flow compensated system with load sensing
Available flow at a single rear SCV 1.3-cm (1/2-in.) couplers: 132 L/min
35 gpm
1.9-cm (3/4-in.) coupler: 159 L/min
42 gpm
Pump rated output Standard: 85-cc pump: 227.1 L/min
60 gpm
Number of rear selective control valves (SCVs) Standard: 1.3-cm (1/2-in.) ISO couplers: 4
Optional: 1.3-cm (1/2-in.) ISO couplers: 5 and 6 available
1.9-cm (3/4-in.) ISO coupler: 1

Key Specs

Transmission type Standard: e23™ PowerShift™ with Efficiency Manager™ 40K, 40 km/h
24.9 mph
Optional: John Deere AutoPowr™ IVT™ 40K, 0.05-42 km/h
0.03-26 mph
Rear hitch category (SAE designation) Standard: Category 4N/3 standard lift at 610 mm (24 in.) behind hitch point: 9072 kg
20,000 lb
Optional: Category 4N/3 at 610 mm (24 in.) behind hitch point: 6803 kg
15,000 lb
Rated PTO power (hp SAE) 211 kW
284 hp
Engine displacement 9.0 L
549 cu in.
Base machine weight e23, 63.5-cm (25-in.) tracks: 15,600 kg
34,400 lb
Maximum engine power ECE-R120: 275 kW
374 hp
Hydraulic pump rated output Standard: 85-cc pump: 227.1 L/min
60 gpm
Engine description John Deere PowerTech™ 9.0 L (B20 diesel compatible)
Rated engine power ECE-R120: 250 kW
340 hp

Miscellaneous

Country of manufacture USA

Operator station

Cab suspension Standard: four-post cab suspension
Radio Standard: AM/FM stereo with weatherband, remote controls, auxiliary input jack, four speakers and external antenna
Instructional seat Standard
Display Standard: 4600 Generation 4 CommandCenter™: 25.4 cm
10 in.
Inner cab volume 3.24 m3
114 cu ft
Seat Degree of seat swivel, left hand
25 degree (angle)
Degree of seat swivel, right hand
40 degree (angle)
Standard: air suspension
Cab glass area 6.52 m2
70.18 sq ft

Precision AG

Remote diagnostics JDLink hardware standard
Telematic JDLink™ hardware standard, activations, and Ethernet harnesses (availability dependent upon destination)
Guidance Integrated AutoTrac™

Rear axle

Final drive type Inboard planetary three pinion

Rear hitch

Sensing type Electrohydraulic
Hitch category (SAE designation) Standard: Category 4N/3 standard lift at 610 mm (24 in.) behind hitch point: 9072 kg
20,000 lb
Optional: Category 4N/3 at 610 mm (24 in.) behind hitch point: 6803 kg
15,000 lb
Maximum lift capacity behind lift points Standard (at 610-mm [24-in.] behind hitch point): 12,124 kg
26,729 lb

Rear power take-off (PTO)

Multispeed PTO option availability Available: 45-mm (1.75-in.), 1000-rpm and 1000E economy rpm PTO, in-cab shiftable
PTO actuation Electrohydraulic with adjustable modulation
Engine rpm (at rated PTO speeds) IVT: 1,000 PTO rpm at 2,000 engine rpm, 1,000 ECO PTO at 1594 engine rpm, 540 PTO rpm at 1,814 engine rpm
e23 PowerShift: 1,000 PTO rpm at 1,995 engine rpm, 1,000 ECO PTO at 1,590 engine rpm, 540 PTO rpm at 1,810 engine rpm
Type Independent
Standard: 44 mm (1.75 in.) 20-spline, 1,000 rpm
Optional: 44 mm (1.75 in.), 20-spline, 1,000 rpm capable of 35 mm (1.375 in.) 540/1000 rpm
44 mm (1.75 in.) 20-spline, 1,000 rpm/1,000E rpm

Serviceability

Interval for engine coolant change 6,000 hours
Interval for hydraulic/transmission oil change 1,500 hours
Interval for engine oil change 500 hours

Steering

Type Standard: Hydraulic power-steering with electric pump backup

Tracks

Mid-rollers Three
Drive type Camso® 4500 and 6500 General Ag Series - friction drive track belts
Tread spacing Standard: 1828.8 to 3048 mm
72 to 120 in.
Track width Standard: 635 mm
25 in.
Available: 419 mm
16.5 in.
457 mm
18 in.
609 mm
24 in.
762 mm
30 in.

Transmission

Type Standard: e23 PowerShift with Efficiency Manager 40K, 40 km/h
24.9 mph
Optional: John Deere AutoPowr IVT 40K, 0.05-42 km/h
0.03-26 mph

Weight

Maximum permissible weight 18,200 kg
40,100 lb
Base machine weight e23, 63.5-cm (25-in.) tracks: 15,600 kg
34,400 lb
Maximum ballast level 17,700 kg
39,000 lb

Additional information

Date collected 12 January 2022