Specifications

Capacities

Transmission-hydraulic system 1500 MFWD: 184.6 L
48.8 U.S. gal.
ILS: 207.2 L
54.7 U.S. gal.
Crankcase oil volume 1500 MFWD: 27.6 L
7.3 U.S. gal.
ILS: 25.8 L
6.8 U.S. gal.
Fuel tank 727 L
192 U.S. gal.
CTIS: 651 L
172 U.S. gal.
EVT: 651 L
Cooling system 42.3 L
11.2 U.S. gal.
EVT: 46.9 L
12.4 U.S. gal.
Diesel exhaust fluid (DEF) tank 37.2 L
9.8 U.S. gal.

Dimensions

Overall length 6,636 mm
261.3 in.
Drawbar clearance 376 mm
14.8 in.
Front axle center MFWD: 686 mm
27 in.
ILS: 590 mm
23.2 in.
Wheelbase MFWD: 3,080 mm
121.3 in.
ILS: 3,050 mm
120.1 in.

Drawbar

Maximum vertical load Dependent on drawbar position: 1837 to 2700 kg
4050 to 6000 lb
Optional: 2,245 kg
4,950 lb
4,990 kg
11,000 lb
Drawbar category Standard: Category 4
Optional: Category 4 with heavy-duty support

Electrical system

Total cold cranking amps 1,850 CCA
Battery options 12 V
Alternator size Standard: 200 amp
Optional: 330 amp
Type of bulb in headlight (Halogen, Zenon, LED) Standard: halogen, 65 W
Available: LED
Working lights Standard: 18 halogen
Available: 18 LED
22 LED

Engine performance

PTO torque rise 40 percent
Power boost 8 percent
Engine peak torque At 1600 rpm: 1851 Nm
1365 lb-ft
Maximum engine power ECE-R120: 326 kW
443 hp
Rated power ECE-R120: 302 kW
410 hp
Rated PTO power (hp SAE) 231 kW
310 hp

Engine specifications

After treatment type Diesel oxidation catalyst (DOC)/diesel particulate filter (DPF)/selective catalytic reduction (SCR)
Aspiration Dual turbochargers, variable geometry turbo with fixed geometry turbo in series; air-to-air aftercooling and cooled exhaust gas recirculation
Rated speed 2100 rpm
Cylinders liners Wet-sleeve
Emission level Final Tier 4
Description John Deere PowerTech 9.0 L (B20 diesel compatible)
Engine family MJDXL09.0333
Engine type In-line six, four valve
Displacement 9.0 L
549 cu in.

Front axle

Type Standard: ILS
Optional: 1500 Series MFWD
Front axle differential lock 1500 Series MFWD: Full-locking electrohydraulic
ILS: Full-locking electrohydraulic

Front hitch

PTO speed 1,000 PTO rpm at 2000 engine rpm
Category Category 3N
Standard lift capacity Category 3N ground-engaging front hitch: 5200 kg
11,464 lb
Front power take-off (PTO) 44 mm (1.75 in.) 20 spline, 1000 rpm
35 mm (1.375 in.) 21 spline, 1000 rpm
35 mm (1.375 in.) 6 spline, 1000 rpm (available dependent on location)

Hydraulic system

SCV control Electronic
Type Closed-center, pressure/flow compensated system with load sensing
Available flow at front SCVs 96 L/min
25 gpm
Available flow at a single rear SCV 1.3-cm (1/2-in.) couplers: 132 L/min
35 gpm
1.9-cm (3/4-in.) coupler: 159 L/min
42 gpm
Pump rated output Standard: 85-cc pump: 227.1 L/min
60 gpm
Optional: 85-cc plus 35-cc dual pump: 318 L/min
84 gpm
Number of rear selective control valves (SCVs) Standard: 1.3-cm (1/2-in.) ISO couplers: 4
Optional: 1.3-cm (1/2-in.) ISO couplers: 5 and 6 available
1.9-cm (3/4-in.) ISO coupler: 1

Key Specs

Rated engine power ECE-R120: 302 kW
410 hp
Rated PTO power (hp SAE) 231 kW
310 hp
Hydraulic pump rated output Standard: 85-cc pump: 227.1 L/min
60 gpm
Optional: 85-cc plus 35-cc dual pump: 318 L/min
84 gpm
Base machine weight ILS™/e23: 12,700 kg
28,000 lb
Maximum engine power ECE-R120: 326 kW
443 hp
Transmission type Standard: e23™ PowerShift™ with Efficiency Manager™ 40K, 40 km/h
24.9 mph
Optional: e23 PowerShift with Efficiency Manager 50K, 50 km/h
31 mph
John Deere eAutoPowr™ EVT 40K, 0.05-42 km/h
0.03-26 mph
John Deere eAutoPowr EVT 50K, 0.05-50 km/h
0.03-31 mph
Engine displacement 9.0 L
549 cu in.
Engine description John Deere PowerTech™ 9.0 L (B20 diesel compatible)
Rear hitch category (SAE designation) Standard: Category 4N/3 standard lift at 610 mm (24 in.) behind hitch point: 9072 kg
20,000 lb
Optional: Category 4N/3 at 610 mm (24 in.) behind hitch point: 6803 kg
15,000 lb

Loaders

Loader 700M

Miscellaneous

Country of manufacture USA

Operator station

Cab suspension Optional
Instructional seat Standard
Radio Standard: AM/FM stereo with weatherband, remote controls, auxiliary input jack, four speakers and external antenna
Inner cab volume 3.24 m3
114 cu ft
Seat Degree of seat swivel, left hand
25 degree (angle)
Degree of seat swivel, right hand
40 degree (angle)
Standard: air suspension
Optional: ActiveSeat™ II
Cab glass area 6.52 m2
70.18 sq ft
Display Standard: 4600 Generation 4 CommandCenter™: 25.4 cm
10 in.

Precision AG

Remote diagnostics JDLink hardware standard
Guidance Integrated AutoTrac™
Telematic JDLink™ hardware standard, activations, and Ethernet harnesses (availability dependent upon destination)

Rear axle

Rear differential lock Full-locking electrohydraulic
Final drive type Inboard planetary three pinion
Type Standard: Rack-and-pinion, double flat, or flange axles
Optional: short, double flat axle with single taper hub: Diameter: 120 x 2550 mm
4.72 x 100.4 in.
Long, double flat axle with single taper hub: Diameter: 120 x 3010 mm
4.72 x 118.5 in.

Rear hitch

Rear axle differential lock Electrohydraulic
Sensing type Electrohydraulic
Maximum lift capacity behind lift points Standard (at 610-mm [24-in.] behind hitch point): 12,124 kg
26,729 lb
Hitch category (SAE designation) Standard: Category 4N/3 standard lift at 610 mm (24 in.) behind hitch point: 9072 kg
20,000 lb
Optional: Category 4N/3 at 610 mm (24 in.) behind hitch point: 6803 kg
15,000 lb

Rear power take-off (PTO)

PTO actuation Electrohydraulic with adjustable modulation
Multispeed PTO option availability Available: 45-mm (1.75-in.), 1000-rpm and 1000E economy rpm PTO, in-cab shiftable
Engine rpm (at rated PTO speeds) e23 PowerShift: 1,000 PTO rpm at 1,995 engine rpm, 1,000 ECO PTO at 1,590 engine rpm, 540 PTO rpm at 1,810 engine rpm
Type Independent
Standard: 44 mm (1.75 in.) 20-spline, 1,000 rpm
Optional: 44 mm (1.75 in.) 20-spline, 1,000 rpm/1,000E rpm

Serviceability

Interval for engine coolant change 6,000 hours
Interval for hydraulic/transmission oil change 1,500 hours
Interval for engine oil change 500 hours

Steering

Type Standard: Hydraulic power-steering with electric pump back-up
Optional: ActiveCommand Steering 2 (ACS™ 2) with electronic backup pump

Tires

Central Tire Inflation System (CTIS) Optional
Wheel tread range 1500 Series MFWD: 1524-3657 mm
60-144 in.
ILS: 1524-3657 mm
Turning radius without brakes 1500 with 420/850R34 Group 43 tires at 182.9-cm (72-in.) spacing: 5.71 m
18.7 ft
ILS with 480/70R34 Group 43 tires at 184.2-cm (72.5-in.) spacing: 6.45 m
21.2 ft

Transmission

Type Standard: e23 PowerShift with Efficiency Manager 40K, 40 km/h
24.9 mph
Optional: e23 PowerShift with Efficiency Manager 50K, 50 km/h
31 mph
John Deere eAutoPowr EVT 40K, 0.05-42 km/h
0.03-26 mph
John Deere eAutoPowr EVT 50K, 0.05-50 km/h
0.03-31 mph

Weight

Maximum permissible weight 20,000 kg
44,100 lb
Base machine weight ILS™/e23: 12,700 kg
28,000 lb
Maximum ballast level 20,000 kg
44,100 lb

Additional information

Date collected 12 January 2022