Specifications

3-point hitch

Type Category 1
Lift capacity, 24-in. behind link arms 1135 kg
2500 lb

Cab

Compliance OSHA, SAE, ASAE
Visibility 360 degree (angle)
Noise rating 78 dBA
Seat equipment Air suspension with swivel
Doors Two
Air conditioning, temperature differential 14.4 °C
58 °F

Dimensions

Front axle clearance 35.1 cm
13.8 in.
Wheelbase 185.5 cm
73 in.
Turning radius without brakes 3.0 m
9.84 ft
Turning radius with brakes 2.8 m
9.19 ft
Approximate shipping weight (open-station; cab) Open operator station (OOS) - 1710 kg
3770 lb
Cab - 2120 kg
4675 lb

Electrical

Battery size 770 CCA
Alternator (12-V) 75 amp
Starter size 2 kW
2.68 hp

Engine

Manufacturer Yanmar
Engine model 4TNV86CHT-MJT
Rated engine speed 2600 rpm
Type Diesel
Injection pump type High pressure common rail direct injection
Aspiration Turbocharged and charge air cooled
Emissions compliance Final Tier 4
Number of cylinders Four
Cylinder liners Cast-in-block
Compression ratio 19.1:1
Lubrication Pressurized
Cooling system Liquid
Air cleaner Dual element with electronic restriction indicator
Bore and stroke 86 x 90 mm
3.4 x 3.54 in.
Family EYDXL2.09HDA
FYDXL2.09HDA
GYDXL2.09HDA
Power take-off (PTO) power PowrReverser transmission: 40.4 kW
54.2 hp
eHydro transmission: 38.7 kW
51.9 hp
Engine power (gross) SAE J1995 rated power: 48.5 kW
65 hp
65.9 PS at 2600 rpm
Cylinders/displacement 4 / 2.091 L
4 / 127.6 cu in.
Fuel tank capacity Rollover protective structure (ROPS) - 56.9 L
15 U.S. gal.
Cab - 52.2 L
13.8 U.S. gal.
Engine torque at rated speed 178 Nm
131.3 lb-ft

Final drive

Type Planetary
Differential lock Yes

Fluid capacities

Crankcase with filter 5.3 L
1.4 qt
Transmission and hydraulic system 47.3 L
12.5 gal.

Fuel system

Type High pressure common rail direct injection

Hydraulics

Type Open center
Draft control sensing Position control
Pump type Single gear
Remote control valves available Up to six rear remotes
Pump rated output Steering
23.5 L/min
6.2 gpm
Implement
42.3 L/min
11.2 gpm
65.8 L/min
17.4 gpm

Key Specs

Hitch type Category 1
Standard transmission; forward/reverse eHydro Transmission (eHST)
Cruise control Standard
Power take-off (PTO) power PowrReverser™ transmission: 40.4 kW
54.2 hp
eHydro™ transmission: 38.7 kW
51.9 hp
Per SAE J1995
Implement hydraulics 42.3 L/min
11.2 gpm
Steering hydraulics 23.5 L/min
6.2 gpm
Wheelbase 185.5 cm
73 in.
Engine power (gross) SAE J1995 rated power: 48.5 kW
65 hp
65.9 PS at 2600 rpm
Approximate shipping weight (open-station; cab) Open operator station (OOS) - 1710 kg
3770 lb
Cab - 2120 kg
4675 lb
Lift capacity, 24-in. behind link arms 1135 kg
2500 lb

Operator station

Platform - flat/straddle Flat
Gear shift location - console/floor PRT - Left-hand side
Rollover protective structure Type
Foldable
Yes

Power take-off (PTO)

Control Independent
Clutch Wet disc
Standard Independent 540 rpm at 2600 rpm
Optional 540E rpm

Tires

Front Farm - 8-16
Turf - 27x10.5-15 or 27x12LL-15
Industrial - 10-16.5
Rear Farm - 13.6-28
Turf - 44x18-20 or 22.5LL-16.1
Industrial - 16.9Lx24
Front tread range 148.1 cm
58.3 in.
Rear tread spacing 137.2 cm
54 in.

Transmission

Final drive Planetary
Brakes Multi-plate wet disc
Steering Hydrostatic power steering
Clutch, wet/dry Wet
Cruise control Standard
Differential lock Yes
Creeper SpeedMatch standard
Standard transmission; forward/reverse eHydro transmission (eHST)
Left-hand reverser PRT only
Transmission gear ranges PRT - 12F/12R eHydro - Infinitely-variable 3 range
Optional transmission; forward/reverse 12/12 PowrReverser transmission (PRT)
Clutch disk diameter wet clutch 129 mm
5.08 in.
Axle capacity Front
1600 kg
3528 lb
Rear
2400 kg
5292 lb