Specifications

3-point hitch

Type Category 1/Category 2
Lift capacity, 24-in. behind link arms 1135 kg
2500 lb

Dimensions

Turning radius with brakes 2.8 m
9.19 ft
Front axle clearance 35.1 cm
13.8 in.
Turning radius without brakes 3 m
9.84 ft
Wheelbase 185.5 cm
73 in.
Approximate shipping weight (open-station; cab) Open station: 1950 kg
4290 lb
Cab: Not applicable

Electrical

Alternator (12-V) 75 amp
Battery size 770 CCA
Starter size 2 kW
2.68 hp

Engine

Air cleaner Dual element with electronic restriction indicator
Type Diesel
Aspiration Turbocharged and charge air cooled
Emissions compliance Final Tier 4
Number of cylinders Four
Injection pump type High-pressure common rail direct injection
Rated engine speed 2600 rpm
Lubrication Pressurized
Cylinder liners Cast-in-block
Cooling system Liquid
Compression ratio 19.1:1
Engine model 4TNV86CT-MJT
Manufacturer Yanmar®
Bore and stroke 86 x 90 mm
3.4 x 3.54 in.
Engine power (gross) SAE J1995 rated power: 48.5 kW
65 hp
65.9 PS at 2600 rpm
Family EYDXL2.09HDA
FYDXL2.09HDA
GYDXL2.09HDA
Power take-off (PTO) power 38.7 kW
51.9 hp
Fuel tank capacity 56.9 L
15 U.S. gal.
Cylinders/displacement 4 cylinders
2.091 L
127.6 cu in.
Engine torque at rated speed 178 Nm
131.3 lb-ft

Final drive

Type Planetary
Differential lock Yes

Fluid capacities

Transmission and hydraulic system 47.3 L
12.5 gal.
Crankcase with filter 5.3 L
1.4 qt

Fuel system

Type High pressure common rail direct injection

Hydraulics

Remote control valves available Two remotes standard
Draft control sensing Position control
Pump type Single gear
Type Open center
Pump rated output Steering
23.5 L/min
6.2 gpm
Implement
42.3 L/min
11.2 gpm

Key Specs

Standard transmission; forward/reverse eHydro transmission
Cruise control Standard
Hitch type Category 1/Category 2
Engine power (gross) SAE J1995 rated power: 48.5 kW
65 hp
65.9 PS at 2600 rpm
Steering hydraulics 23.5 L/min
6.2 gpm
Power take-off (PTO) power 38.7 kW
51.9 hp
Approximate shipping weight (open-station; cab) Open station: 1950 kg
4290 lb
Cab: Not applicable
Implement hydraulics 42.3 L/min
11.2 gpm
Wheelbase 185.5 cm
73 in.
Lift capacity, 24-in. behind link arms 1135 kg
2500 lb

Operator station

Platform - flat/straddle Flat
Rollover protective structure Type
Foldable
Yes

Power take-off (PTO)

Control Independent
Clutch Wet disc
Standard Independent 540 rpm at 2600 rpm
Optional 540E rpm

Tires

Front R4 Industrial 31.5x13-16.5
Rear R4 Industrial 16.9-24
R4 Industrial 19.5L-24
Rear tread spacing 1375 mm
54.1 in.
1495 mm
58.9 in.
Front tread range 1374.6 mm
54.1 in.

Transmission

Cruise control Standard
Clutch, wet/dry Wet
Standard transmission; forward/reverse eHydro transmission
Final drive Planetary
Differential lock Yes
Steering Hydrostatic power steering
Brakes Multi-plate wet disc
Transmission gear ranges eHydro - Infinitely-variable three range
Creeper SpeedMatch™ standard
Axle capacity Front
1600 kg
3528 lb
Rear
2400 kg
5292 lb
Clutch disk diameter wet clutch 129 mm
5.08 in.