4052M

  • John Deere
  • Compact Tractors 4 Series

Contact Your Preferred Store:

John Deere 4052M
Key Features & Specs
  • Turbocharged diesel engine
  • PowrReverser™ or eHydrostatic Transmission options
  • Standard 4-wheel-drive
  • Category 1, 3-point hitch compatible with iMatch™ Quick-Hitch
  • HP 51.5
  • PTO HP 41.2
  • 2WD or 4WD 4WD
  • 3PT Hitch Category 1
  • Cab or Open Station Open Station
  • Transmission Type Hydrostatic – 3 Range or PowrReverser™ 12F/12R

Specifications

3-point hitch

Type Category 1
Lift capacity, 24-in. behind link arms 1135 kg
2500 lb

Dimensions

Turning radius without brakes 3 m
9.84 ft
Front axle clearance 25.1 cm
13.8 in.
Turning radius with brakes 2.8 m
9.19 ft
Approximate shipping weight (open-station; cab) Open station with hydrostatic transmission: 1664 kg
3668 lb
Cab with hydrostatic transmission: Not applicable
Open station with PowrReverser transmission: 1703 kg
3754 lb
Cab with PowrReverser: Not applicable
Wheelbase 185.5 cm
73 in.

Electrical

Battery size 770 CCA
Alternator (12-V) 75 amp
Starter size 2 kW
2.68 hp

Engine

Engine model 4TNV86CT-MJT
Rated engine speed 2600 rpm
Type Diesel
Injection pump type High pressure common rail direct injection
Aspiration Turbocharged
Emissions compliance Final Tier 4
Number of cylinders Four
Cylinder liners Cast-in-block
Compression ratio 19.1:1
Lubrication Pressurized
Cooling system Liquid
Air cleaner Dual element
Engine power (gross) SAE J1995 rated power: 37.9 kW
50.8 hp
51.5 PS at 2600 rpm
Bore and stroke 86 x 90 mm
3.4 x 3.54 in.
Family EYDXL2.09TDA
FYDXL2.09TDA
GYDXL2.09TDA
Engine torque at rated speed 139 Nm
102.5 lb-ft
Fuel tank capacity 56.9 L
15 U.S. gal.
Power take-off (PTO) power 29.2 kW
39.1 hp
Cylinders/displacement 4 / 2.091 L
4 / 127.6 cu in.
Manufacturer Yanmar®

Final drive

Type Planetary
Differential lock Yes

Fluid capacities

Crankcase with filter 5.3 L
1.4 qt
Transmission and hydraulic system 47.3 L
12.5 gal.

Fuel system

Type High pressure common rail direct injection

Hydraulics

Type Open center
Draft control sensing Position control
Remote control valves available Up to three rear remotes
Pump type Single gear
Pump rated output Steering
23.5 L/min
6.2 gpm
Implement
42.3 L/min
11.2 gpm
65.8 L/min
17.4 gpm

Key Specs

Cruise control Optional
Hitch type Category 1
Lift capacity, 24-in. behind link arms 1135 kg
2500 lb
Standard transmission; forward/reverse PowrReverser transmission
Wheelbase 185.5 cm
73 in.
Approximate shipping weight (open-station; cab) Open station with hydrostatic transmission: 1664 kg
3668 lb
Cab with hydrostatic transmission: Not applicable
Open station with PowrReverser transmission: 1703 kg
3754 lb
Cab with PowrReverser: Not applicable
Steering hydraulics 23.5 L/min
6.2 gpm
Power take-off (PTO) power 29.2 kW
39.1 hp
Implement hydraulics 42.3 L/min
11.2 gpm
Engine power (gross) SAE J1995 rated power: 37.9 kW
50.8 hp
51.5 PS at 2600 rpm

Operator station

Platform - flat/straddle Flat
Gear shift location - console/floor PowrReverser - Left-hand side
Rollover protective structure Type
Foldable
Yes

Power take-off (PTO)

Control Position
Clutch Wet disc
Standard Independent 540 rpm at 2600 rpm

Tires

Rear tread spacing 137.2 cm
54 in.
Front tread range 148.1 cm
58.3 in.
Front Farm - 8-16
Turf - 27x10.5-15
Industrial - 10-16.5
Rear Farm - 13.6-28
Turf - 44x18-20 or 22.5LL-16.1
Industrial - 16.9Lx24

Transmission

Final drive Planetary
Brakes Multi-plate wet disc
Steering Hydrostatic power steering
Clutch, wet/dry Wet
Cruise control Optional
Differential lock Yes
Optional transmission; forward/reverse eHydro transmission
Standard transmission; forward/reverse PowrReverser transmission
Left-hand reverser PowrReverser transmission only
Axle capacity Front
1600 kg
3528 lb
Rear
2400 kg
5292 lb
Transmission gear ranges PowrReverser: 12F/12R
eHydro: Infinitely-variable three range
Clutch disk diameter wet clutch 129 mm
5.08 in.