Specifications

3-point hitch

Type Category 1
Lift capacity, 24-in. behind link arms 944 kg
2081.2 lb

Dimensions

Approximate shipping weight (open-station; cab) OOS: 1260 kg
2778 lb
Cab: Not applicable
Wheelbase 1574 mm
62 in.
Front axle clearance Minimum: 331 mm
13 in.
Maximum: 353 mm
13.9 in.
Turning radius with brakes 1.63 m
5.3 ft

Electrical

Battery size 600 CCA
Alternator (12-V) 55 amp
Starter size 1.4 kW
1.9 hp

Engine

Aspiration Natural
Number of cylinders Three
Cylinder liners Cast-in-block
Lubrication Pressurized
Air cleaner Dual element
Compression ratio 19.1:1
Injection pump type Direct injection
Engine model 3TNV88F-EPJPT
Emissions compliance Final Tier 4
Rated engine speed 2400 rpm
Cooling system Liquid
Engine power (gross) SAE J1995 rated power: 18.2 kW
24.4 hp
24.7 PS at 2400 rpm
Fuel tank capacity 36.7 L
9.7 U.S. gal.
Power take-off (PTO) power 15.4 kW
20.7 hp
Manufacturer Yanmar®
Engine torque at rated speed 72.4 Nm
53.4 lb-ft
Bore and stroke 88 x 90 mm
3.46 x 3.54 in.
Cylinders/displacement 3 / 1.64 L
3 / 100.2 cu in.

Final drive

Type Spur gear

Fluid capacities

Crankcase with filter 4.5 L
4.8 qt
Transmission and hydraulic system 33 L
34.8 qt

Fuel system

Type Direct injection

Hydraulics

Type Open center
Remote control valves available Up to two (optional)
Pump type Single gear
Draft control sensing Position control
Maximum operating pressure 172 bar
2495 psi
Pump rated output Steering
14.4 L/min
3.8 gpm
Implement
19.2 L/min
5.1 gpm
33.6 L/min
8.9 gpm

Key Specs

Cruise control No
Hitch type Category 1
Standard transmission; forward/reverse 8F/8R synchromesh shuttle shift gear transmission
Engine power (gross) SAE J1995 rated power: 18.2 kW
24.4 hp
24.7 PS at 2400 rpm
Implement hydraulics 19.2 L/min
5.1 gpm
Power take-off (PTO) power 15.4 kW
20.7 hp
Approximate shipping weight (open-station; cab) Open operator station (OOS): 1260 kg
2778 lb
Cab: Not applicable
Steering hydraulics 14.4 L/min
3.8 gpm
Lift capacity, 24-in. behind link arms 944 kg
2081.2 lb
Wheelbase 1574 mm
62 in.

Miscellaneous

Toolbox Yes
12-V Outlet No
Tilt steering wheel No

Operator station

Gear shift location - console/floor Right-hand side
Platform - flat/straddle Straddle
Rollover protective structure Type
Foldable
ASABE S478

Power take-off (PTO)

Control Mechanical
Clutch Transmission
Standard At 2400 rpm: 540 rpm
Brake (for mid and rear PTO) Wet disk

Tires

Rear R1 Bar: 11.2-24
R3 Turf: 41x14-20
R4 Industrial: 15-19.5
Front R1 Bar: 7-14
R3 Turf: 27x8.5-15
R4 Industrial: 25x8.5-14

Transmission

Creeper No
Final drive Spur Gear
Left-hand reverser Yes
Differential lock Yes
Standard transmission; forward/reverse 8F/8R synchromesh shuttle shift gear transmission
Cruise control No
Steering Power steering
Brakes Wet disk
Transmission gear ranges Four gears and two ranges
Axle capacity Front
880 kg
1940 lb
Rear
1600 kg
3527 lb