Key Features & Specs
- Standard LED headlights and fender lights
- Comfortable, marine-grade seat stays in top condition
- Larger, heavier frame for added stability
- Up to 72" AutoConnect™ mid-mower deck can be installed or removed in under 5 minutes
- 3PT Hitch Category 1
- Cab or Open Station Open Station
-
HP
31.2*
- 2WD or 4WD 4WD
-
PTO HP
24.2
- Transmission Type Hydrostatic
Specifications
3-point hitch
Type | Category 1 |
Lift capacity, 24-in. behind link arms | 615 kg 1356 lb |
Dimensions
Approximate shipping weight (open-station; cab) | Open station: 1306 kg 2879 lb Cab: Not applicable |
Wheelbase | 1723 mm 67.8 in. |
Turning radius with brakes | 2.46 m 8.07 ft |
Electrical
Alternator (12-V) | 85 amp |
Battery size | 500 CCA |
Starter size | 1.4 kW 1.9 hp |
Engine
Compression ratio | 19.1:1 |
Emissions compliance | Final Tier 4 |
Cylinder liners | Cast-in-block |
Aspiration | Natural |
Injection pump type | Direct Injection |
Type | Direct Injection |
Air cleaner | Dual element |
Lubrication | Pressurized |
Rated engine speed | 2500 rpm |
Cooling system | Water pump |
Number of cylinders | Three |
Engine model | 3TNV88C-NJT2 |
Cylinders/displacement | Three cylinders: 1.642 L 100.2 cu in. |
Manufacturer | Yanmar® |
Engine power (gross) | SAE J1995 rated power: 22.9 kW 30.7 hp 31.2 PS at 2500 rpm |
Engine torque at rated speed | 87.5 Nm 64.5 lb-ft |
Bore and stroke | 88x90 mm 3.46x3.54 in. |
Fuel tank capacity | 32 L 8.5 U.S. gal. |
Power take-off (PTO) power | 18 kW 24.2 hp |
Final drive
Type | Spur Gear |
Differential lock | Yes |
Fluid capacities
Crankcase with filter | 4.5 L 4.8 qt |
Fuel system
Type | Direct Injection |
Hydraulics
Draft control sensing | Position control |
Remote control valves available | Up to three |
Type | Open center |
Pump type | Dual gear |
Pump rated output | Steering 15 L/min 4 gpm Implement 20.2 L/min 5.3 gpm 35.2 L/min 9.3 gpm |
Maximum operating pressure | 172 bar 2495 psi |
Key Specs
Standard transmission; forward/reverse | Hydrostatic transmission (HST) |
Cruise control | Standard |
Hitch type | Category 1 |
Implement hydraulics | 20.2 L/min 5.3 gpm |
Lift capacity, 24-in. behind link arms | 615 kg 1356 lb |
Wheelbase | 1723 mm 67.8 in. |
Power take-off (PTO) power | 18 kW 24.2 hp |
Engine power (gross) | SAE J1995 rated power: 22.9 kW 30.7 hp 31.2 PS at 2500 rpm |
Steering hydraulics | 15 L/min 4 gpm |
Approximate shipping weight (open-station; cab) | Open station: 1306 kg 2879 lb Cab: Not applicable |
Miscellaneous
12-V Outlet | Yes |
Toolbox | Yes |
Tilt steering wheel | Yes |
Operator station
Rollover protective structure | Type Foldable ASABE S478 |
Platform - flat/straddle | Semi-flat |
Power take-off (PTO)
Brake (for mid and rear PTO) | Wet disc |
Control | Independent |
Standard | Rear: 543 rpm Mid: 1998 rpm |
Clutch | Wet disc |
Tires
Front | R1 Ag 7.00-12 R3 Turf 23x8.50-14 R4 Industrial 23x8.50-14 R3 Turf Radial 200/60 R15 |
Rear | R1 Ag 12.4-16 R3 Turf 14-17.5 R4 Industrial 14-17.5 R3 Turf Radial 300/70 R20 |
Transmission
Differential lock | Yes |
Standard transmission; forward/reverse | Hydrostatic transmission (HST) |
Cruise control | Standard |
Creeper | No |
Steering | Power steering |
Brakes | Wet disc |
Final drive | Spur gear |
Axle capacity | Front 880 kg 1940 lb Rear 1800 kg 3968 lb |