Specifications

3-point hitch

Type Limited Category 1
Lift capacity, 24-in. behind link arms 415 kg
915 lb

Dimensions

Limited slip differential No
Approximate shipping weight (open-station; cab) Open station: 849 kg
1872 lb
Cab: 1085 kg
2392 lb
Wheelbase 1600 mm
63 in.
Turning radius without brakes Outside front tire: 2.51 m
8.2 ft

Electrical

Battery size 500 CCA
Alternator (12-V) 40 amp
Starter size 1.2 kW
1.6 hp

Engine

Cylinder liners Cast-in-block
Aspiration Natural
Air cleaner Dual element
Rated engine speed 3200 rpm
Engine model 3TNV80F-NCJT
Lubrication Pressurized
Cooling system Water pump
Type Diesel
Number of cylinders Three
Emissions compliance Final Tier 4
Injection pump type Indirect injection
Cylinders/displacement Three cylinders: 1.267 L
77 cu in.
Bore and stroke 80 x 84 mm
3.2 x 3.3 in.
Engine torque at rated speed 53.1 Nm
39.1 lb-ft
Manufacturer Yanmar®
Engine power (gross) SAE J1995 rated power: 17.8 kW
23.9 hp
24.2 PS at 3200 rpm
Compression ratio 23.1:01
Fuel tank capacity 20.4 L
5.39 gal.
Power take-off (PTO) power 12.8 kW
17.2 hp

Final drive

Differential lock Yes
Type Spur Gear

Fluid capacities

Crankcase with filter 2.7 L
2.9 qt

Fuel system

Type Indirect injection

Hydraulics

Remote control valves available Two
Pump type Gear
Draft control sensing Position control
Type Open center
Maximum operating pressure 137 bar
1987 psi
Pump rated output Steering
13.25 L/min
3.5 gpm
Implement
13.25 L/min
3.5 gpm
26.5 L/min
7.0 gpm

Key Specs

Cruise control Standard
Hitch type Limited Category 1
Wheelbase 1600 mm
63 in.
Steering hydraulics 13.4 L/min
3.5 gpm
Approximate shipping weight (open-station; cab) Open station: 849 kg
1872 lb
Cab: 1085 kg
2392 lb
Lift capacity, 24-in. behind link arms 415 kg
915 lb
Standard transmission; forward/reverse Hydrostatic - two range
Power take-off (PTO) power 12.8 kW
17.2 hp
Engine power (gross) SAE J1995 rated power: 17.8 kW
23.9 hp
24.2 PS at 3200 rpm
Implement hydraulics 13.4 L/min
3.5 gpm

Miscellaneous

Toolbox Yes
Tilt steering wheel Yes
12-V Outlet Yes

Operator station

Platform - flat/straddle Three-piece semi flat
Gear shift location - console/floor Left-hand side
Rollover protective structure Type
Foldable
OSHA, SAE, ASAE

Power take-off (PTO)

Control Independent
Brake (for mid and rear PTO) Wet disk
Clutch Wet disk
Standard Rear - 540 rpm
Mid - 2100 rpm

Tires

Rear R3 Turf: 12-16.5
R3 Radial: 280/70 R16
R4 Industrial: 12-16.5
Front R3 Turf: 23x8.50-12
R3 Radial: 220/55-R12
R4 Industrial: 23x8.50-12

Transmission

Cruise control Standard
Brakes Wet disc
Differential lock Yes
Left-hand reverser No
Steering Power steering
Final drive Spur Gear
Creeper No
Standard transmission; forward/reverse Hydrostatic - two range
Axle capacity Front
612 kg
1349 lb
Rear
1100 kg
2425 lb