Specifications

3-point hitch

Type Limited Category 1
Lift capacity, 24-in. behind link arms 344 kg
758 lb

Dimensions

Limited slip differential No
Front axle clearance 195 mm
7.7 in.
Approximate shipping weight (open-station; cab) Open station: 656 kg
1446 lb
Cab: Not applicable
Wheelbase 1450 mm
57.1 in.
Turning radius without brakes Outside front tire: 2.51 m
8.2 ft

Electrical

Battery size 500 CCA
Alternator (12-V) 40 amp
Starter size 1.2 kW
1.6 hp

Engine

Engine model 3TNM74F-NCJT
Compression ratio 23.5:1
Air cleaner Dual element
Aspiration Natural
Cooling system Water pump
Injection pump type Indirect injection
Number of cylinders Three
Cylinder liners Cast-in-block
Lubrication Pressurized
Rated engine speed 3200 rpm
Emissions compliance Final Tier 4
Type Diesel
Engine torque at rated speed 47.7 Nm
35.2 lb-ft
Power take-off (PTO) power 11.1 kW
14.9 hp
Engine power (gross) SAE J1995 rated power: 16 kW
21.5 hp
21.8 PS at 3200 rpm
Fuel tank capacity 24 L
6.3 U.S. gal.
Bore and stroke 74 x 77 mm
2.91 x 3.03 in.
Cylinders/displacement Three cylinders: 0.993 L
60.6 cu in.
Manufacturer Yanmar®

Final drive

Type Spur gear
Differential lock Yes

Fluid capacities

Transmission and hydraulic system 12.3 L
3.2 gal.
Crankcase with filter 2.7 L
2.9 qt

Fuel system

Type Indirect injection

Hydraulics

Draft control sensing Select control
Type Open center
Remote control valves available Three
Pump type Single gear
Maximum operating pressure 138 bar
2000 psi
Pump rated output Steering
13.2 L/min
3.5 gpm
Implement
13.2 L/min
3.5 gpm
24 L/min
6.3 gpm

Key Specs

Cruise control No
Hitch type Limited Category 1
Standard transmission; forward/reverse Hydrostatic - two range
Engine power (gross) SAE J1995 rated power: 16 kW
21.5 hp
21.8 PS at 3200 rpm
Power take-off (PTO) power 11.1 kW
14.9 hp
Approximate shipping weight (open-station; cab) Open station: 656 kg
1446 lb
Cab: Not applicable
Lift capacity, 24-in. behind link arms 344 kg
758 lb
Steering hydraulics 13.2 L/min
3.5 gpm
Implement hydraulics 13.2 L/min
3.5 gpm
Wheelbase 1450 mm
57.1 in.

Miscellaneous

Toolbox Yes

Operator station

Gear shift location - console/floor Left-hand side
Platform - flat/straddle One-piece semi flat
Rollover protective structure Type
Foldable
Yes

Power take-off (PTO)

Brake (for mid and rear PTO) Wet disk
Control Independent
Clutch Wet disk
Standard Rear: 540 rpm
Mid: 2100 rpm

Tires

Rear tread spacing 895 mm
35.2 in.
Front tread range 931 mm
36.7 in.
Rear R3 Turf: 26x12-12
R4: 26x12-12
Front R3 Turf: 18x8.50-10
R4: 18x8.5-10

Transmission

Brakes Wet disc (left-hand pedal)
Creeper No
Differential lock Yes
Final drive Spur gear
Left-hand reverser No
Steering Power
Cruise control No
Standard transmission; forward/reverse Hydrostatic - two range
Axle capacity Front
612 kg
1349 lb
Rear
715 kg
1576 lb

John Deere 1023E Image Gallery