Specifications

Capacities

Transmission-hydraulic system With 3-point hitch and PTO: 227 L
60 U.S. gal.
Without 3-point hitch and PTO: 220 L
58 U.S. gal.
Crankcase oil volume 64 L
16.9 U.S. gal.
Diesel exhaust fluid (DEF) tank 120 L
31.7 U.S. gal.
Fuel tank 1514 L
400 U.S. gal.
Cooling system 56.5 L
14.9 U.S. gal.

Dimensions

Overall length Excluding hitch: 8309 mm
327.1 in.
Including hitch and coupler: 8545 mm
336.4 in.
Wheelbase 4125 mm
162.4 in.
Drawbar clearance 311 mm
12.2 in.
Approximate shipping weight, Open;Cab 20,582 kg
45,375 lb

Drawbar

Maximum vertical load 5440 kg
12,000 lb
Drawbar category Category 5

Electrical system

Type of bulb in headlight (Halogen, Zenon, LED) Standard: halogen, 65 W
Optional: LED
Alternator size Standard: 250 amp
Optional: 330 amp
Battery options 12 V
Total cold cranking amps 3 x 925 CCA
Total: 2775 CCA
Working lights Standard: 18 halogen
Optional: 18 or 24 LED plus 8 LED convenience lights

Engine performance

Engine peak torque At 1550 rpm: 2492 Nm
1838 lb-ft
Power boost 10 percent
Rated power 397 kW
540 hp
PTO torque rise 38 percent
Rated PTO power (hp SAE) 249 kW
335 hp
Maximum engine power 437 kW
594 hp

Engine specifications

Engine family MJDXL13.5334
Emission level Final Tier 4 (FT4)
Displacement 13.6 L
827 cu in.
Engine type In-line six, four valve
Aspiration Dual series turbocharger with fixed geometry first stage and wastegated second stage; air-to-air aftercooling and cooled exhaust gas recirculation (EGR)
Cylinders liners Wet-sleeve
After treatment type Diesel oxidation catalyst (DOC)/selective catalytic reduction (SCR)
Rated speed 2100 rpm
Description JD14 (B20 diesel compatible)

Front axle

Front axle differential lock Full-locking electrohydraulic

Hydraulic system

Type Closed-center, pressure-and-flow compensated
SCV control Electronic
Number of rear selective control valves (SCVs) Four to eight factory or field installed
Base: four 1.3-cm (1/2-in.) couplers
Optional: five to six 1.3-cm (1/2-in.) couplers factory installed
Optional: three 1.9-cm (3/4-in.) couplers plus five 1.3-cm (1/2-in.) couplers factory installed
Pump rated output Standard: 208 L/min
55 gpm
Optional: 416 L/min
110 gpm
Available flow at a single rear SCV 1.3-cm (1/2-in.) couplers: 132 L/min
35 gpm
1.9-cm (3/4-in.) couplers: 159 L/min
42 gpm

Key Specs

Transmission type John Deere e18™ 18-speed PowerShift™ with Efficiency Manager™: 40 km/h
25 mph
Hydraulic pump rated output Standard: 208 L/min
55 gpm
Optional: 416 L/min
110 gpm
Engine displacement 13.6 L
827 cu in.
Base machine weight Narrow undercarriage: 24,639 kg
54,320 lb
Wide undercarriage: 25,546 kg
56,320 lb
Rated engine power 397 kW
540 hp
Rear hitch category (SAE designation) Category 4N/N: 6804 kg
15,000 lb
Category 4N/N: 9072 kg
20,000 lb
Engine description JD14 (B20 diesel compatible)
Maximum engine power 437 kW
594 hp
Rated PTO power (hp SAE) 249 kW
335 hp

Miscellaneous

Country of manufacture USA

Operator station

Inner cab volume 3.27 m3
115 cu ft
Instructional seat Standard
Radio Standard: AM/FM stereo with weatherband, remote controls, auxiliary input jack, four speakers and external antenna
Optional: Touchscreen radio
Display Standard: Generation 4 4600 CommandCenter™: 25.4 cm
10 in.
Optional: Extended monitor
Cab glass area 6.64 m2
71.47 sq ft
Seat Degree of seat swivel, left hand
25 degree (angle)
Degree of seat swivel, right hand
40 degree (angle)
Air suspension
Cab suspension Standard

Precision AG

Telematic Available with JDLink™ hardware, activations, and Ethernet harnesses (availability dependent upon destination)
Guidance Integrated AutoTrac™
Remote diagnostics Available with activated JDLink hardware and activations

Rear axle

Final drive type Bull gear and double idler with floating pinion
Rear differential lock Full-locking electrohydraulic

Rear hitch

Hitch category (SAE designation) Category 4N/4: 6804 kg
15,000 lb
Category 4N/4: 9072 kg
20,000 lb
Maximum lift capacity behind lift points Category 4N/4: 9072 kg
20,000 lb
Sensing type Electrohydraulic with draft sensing

Rear power take-off (PTO)

PTO actuation Electrohydraulic
Type Independent
44 mm (1.75 in.) 20-spline, 1000 rpm

Serviceability

Interval for engine oil change 500 hours
Interval for hydraulic/transmission oil change 1500 hours
Interval for engine coolant change 6000 hours

Steering

Type Standard: Hydraulic power steering
Optional: ActiveCommand Steering (ACS®)

Tires

Turning radius with brakes With 76.2 cm (30 in.) track and 221 cm (87 in.) spacing: 6.42 m
21.1 ft

Tracks

Track width Standard: 762 mm
30 in.
Optional: 457, 610, or 914 mm
18, 24, or 36 in.
Drive type Camso® 3500 and 6500 Ag Series - reinforced drive lug technology
Tread spacing Narrow undercarriage: 2032, 2235, or 3048 mm
80, 88, or 120 in.
Wide undercarriage: 2218 or 3048 mm
87 or 120 in.
Mid-rollers Narrow undercarriage: Three
Wide undercarriage: Two

Transmission

Type John Deere e18 18-speed PowerShift with Efficiency Manager: 40 km/h
25 mph

Weight

Base machine weight Narrow undercarriage: 24,639 kg
54,320 lb
Wide undercarriage: 25,546 kg
56,320 lb
Maximum ballast level 28,576 kg
63,000 lb

Additional information

Date collected 22 January 2022