Specifications

Capacities

Crankcase oil volume 64 L
16.9 U.S. gal.
Fuel tank 1514 L
400 U.S. gal.
Transmission-hydraulic system With 3-point hitch and PTO: 227 L
60 U.S. gal.
Without 3-point hitch and PTO: 220 L
58 U.S. gal.
Cooling system 56.5 L
14.9 U.S. gal.
Diesel exhaust fluid (DEF) tank 120 L
31.7 U.S. gal.

Dimensions

Overall length With front weights, excluding hitch and coupler: 7945 mm
312.8 in.
With front weights, including hitch and coupler: 8427 mm
331.8 in.
Wheelbase 3912 mm
154 in.
Drawbar clearance Group 48 tires: 527 mm
20.7 in.
Approximate shipping weight, Open;Cab 20,856 kg
45,980 lb

Drawbar

Drawbar category Category 4 or Category 5
Maximum vertical load Standard: 2470 kg
5450 lb
Optional: Category 4 with heavy-duty drawbar support: 2470 kg
Category 5 with heavy-duty drawbar support: 5440 kg
12,000 lb

Electrical system

Type of bulb in headlight (Halogen, Zenon, LED) Standard: halogen, 65 W
Optional: LED
Total cold cranking amps 3 x 925 CCA
Total: 2775 CCA
Battery options 12 V
Working lights Standard: 18 halogen
Optional: 18 or 24 LED plus 8 LED convenience lights
Alternator size Standard: 250 amp
Optional: 330 amp

Engine performance

Power boost 10 percent
Rated power 287 kW
390 hp
PTO torque rise 38 percent
Maximum engine power 316 kW
429 hp
Rated PTO power (hp SAE) 249 kW
335 hp
Engine peak torque At 1550 rpm: 1800 Nm
1328 lb-ft

Engine specifications

Description JD14 (B20 diesel compatible)
Aspiration Single wastegated turbocharger with air-to-air aftercooling and cooled exhaust gas recirculation (EGR)
After treatment type Diesel oxidation catalyst (DOC)/selective catalytic reduction (SCR)
Emission level Final Tier 4 (FT4)
Engine type In-line six, four valve
Engine family MJDXL13.5334
Displacement 13.6 L
827 cu in.
Rated speed 2100 rpm
Cylinders liners Wet-sleeve

Front axle

Type Diameter: 120 x 3048 mm
4.72 x 120 in.
Front axle differential lock Full-locking electrohydraulic

Hydraulic system

Type Closed-center, pressure-and-flow compensated
Pump rated output Standard: 208 L/min
55 gpm
Optional: 416 L/min
110 gpm
SCV control Electronic
Available flow at a single rear SCV 1.3-cm (1/2-in.) couplers: 132 L/min
35 gpm
1.9-cm (3/4-in.) couplers: 159 L/min
42 gpm
Number of rear selective control valves (SCVs) Four to eight factory or field installed
Base: four 1.3-cm (1/2-in.) couplers
Optional: five to six 1.3-cm (1/2-in.) couplers factory installed
Optional: three 1.9-cm (3/4-in.) couplers plus five 1.3-cm (1/2-in.) couplers factory installed

Key Specs

Rear hitch category (SAE designation) Category 4N: 6804 kg
15,000 lb
Category 4N: 9072 kg
20,000 lb
Category 4N/4: 6804 kg
Category 4N/4: 9072 kg
Maximum engine power 316 kW
429 hp
Rated engine power 287 kW
390 hp
Rated PTO power (hp SAE) 249 kW
335 hp
Transmission type John Deere e18™ 18-speed PowerShift™ with Efficiency Manager™: 40 km/h
25 mph
Base machine weight 20,856 kg
45,980 lb
Hydraulic pump rated output Standard: 208 L/min
55 gpm
Optional: 416 L/min
110 gpm
Engine description JD14 (B20 diesel compatible)
Engine displacement 13.6 L
827 cu in.

Miscellaneous

Country of manufacture USA

Operator station

Seat Degree of seat swivel, left hand
25 degree (angle)
Degree of seat swivel, right hand
40 degree (angle)
Standard: air suspension
Optional: ActiveSeat™ II
Inner cab volume 3.27 m3
115 cu ft
Cab glass area 6.64 m2
71.47 sq ft
Radio Standard: AM/FM stereo with weatherband, remote controls, auxiliary input jack, four speakers and external antenna
Optional: Touchscreen radio
Instructional seat Standard
Display Standard: Generation 4 4600 CommandCenter™: 25.4 cm
10 in.
Optional: Extended monitor

Precision AG

Telematic Available with JDLink™ hardware, activations, and Ethernet harnesses (availability dependent upon destination)
Remote diagnostics Available with activated JDLink hardware and activations
Guidance Integrated AutoTrac™

Rear axle

Type Diameter: 120 x 3048 mm
4.72 x 120 in.
Final drive type Inboard planetary with double-reduction axle
Rear differential lock Full-locking electrohydraulic

Rear hitch

Maximum lift capacity behind lift points Category 4N/4: 9072 kg
20,000 lb
Hitch category (SAE designation) Category 4N: 6804 kg
15,000 lb
Category 4N: 9072 kg
20,000 lb
Category 4N/4: 6804 kg
Category 4N/4: 9072 kg
Sensing type Electrohydraulic with draft sensing

Rear power take-off (PTO)

Type Independent
44 mm (1.75 in.) 20-spline, 1000 rpm
PTO actuation Electrohydraulic

Serviceability

Interval for engine oil change 500 hours
Interval for hydraulic/transmission oil change 1500 hours
Interval for engine coolant change 6000 hours

Steering

Type Standard: Hydraulic power steering
Optional: ActiveCommand Steering (ACS™)

Tires

Turning radius with brakes Group 48 tires: 6.099 m
20 ft

Transmission

Type John Deere e18 18-speed PowerShift with Efficiency Manager: 40 km/h
25 mph

Weight

Base machine weight 20,856 kg
45,980 lb
Maximum ballast level 27,216 kg
60,000 lb

Additional information

Date collected 22 January 2022