2730

  • John Deere
  • Rippers

Contact Your Preferred Store:

John Deere 2730
Key Features & Specs
  • Adjust depth in six seconds on the go
  • In-cab control of each functional area
  • 1/10th-in. (2.5-mm) accuracy
  • Expanded tractor compatibility
  • Working Depth up to 16 in (406 mm)
  • Residue Conditions Heavy
  • Working Speed 5 mph (8 km/h)
  • Residue Management fracture/size/ mix/bury
  • Required HP (PTO)/FT 335 to 620 * (250-462.5 kW)
  • Depth Control TruSet/Single-point

Specifications

Additional Features

Option 1 Hydraulically adjustable finishing attachments
Knife-edge rolling basket
Round-bar rolling basket
Coil-tine harrow

Depth

Maximum operating depth 40.6 cm
16 in.

Depth control

Option 1 Single-point crank
Option 2 TruSet™ tillage

Ground engaging components

Type Wingless, LaserRip™ II points: 12.7 cm
5 in.
17.8 cm
7 in.
25.4 cm
10 in.
Coverboards On parabolic standards: 10.2 cm
4 in.
15.2 cm
6 in.
20.3 cm
8 in.

Hitch

Fore-aft adjustment Hitch turnbuckle
Design Single tube

Horsepower

Horsepower required per standard 25.1-41 kW
34-55 hp

Hydraulics

Option 2 5 SCVs (depth control, front disk, rear conditioner, wingfold, optional rolling baskets) at 17,237 kPa
2,500 psi
for optimum raise times
Option 1 4 SCVs (depth control, front disk, rear conditioner, optional rolling baskets) at 17,237 kPa
2,500 psi
for optimum raise times

Key Specs

Standards Spacing
61 cm
24 in.
Operating speed 8-11.3 km/h
5-7 mph
Working width Option 1: 4.3 m
14 ft
Option 2: 5.5 m
18 ft
Option 3: 5.5 m
Option 4: 6.7 m
22 ft
Option 5: 7.9 m
26 ft
Transport width Option 1: Individual blades: 6.1 m 19.9 ft
Disk gangs: 5.7 m 18.8 ft
Option 2: Individual blades: 6.9 m 22.5 ft
Disk gangs: 6.9 m 22.5 ft
Option 3: Individual blades: 5.7 m 18.8 ft
Disk gangs: 5.8 m 19.1 ft
Option 4: Individual blades: 5.6 m 18.3 ft
Disk gangs: 5.7 m 18.7 ft
Option 5: Individual blades: 5.6 m 18.3 ft
Disk gangs: 5.6 m 18.3 ft
Horsepower required per standard 25.1-41 kW
34-55 hp
Maximum operating depth 40.6 cm
16 in.

Mulching disk components

Front frame angle Fixed: 18 degree (angle)
Bearings Sealed, maintenance-free
Scraper Heavy-duty floating combination scraper (base option)
Type of standard C-spring
Description X-type configuration at front of tool
Rear frame angle Fixed: 18 degree (angle)
Base equipment blades Solid spherical low-concavity disk blades: 660x6 mm
26x0.25 in.
Depth control TruSet in-cab controls
Single-point depth control
Maximum depth 20.3 cm
8 in.
Blade spacing Individual: 45.7 cm
18 in.
Effective - 22.9 cm
9 in.
Disk gang: 27.9 cm
11 in.
Effective: 14 cm
5.5 in.

Rear conditioner

Bearings Sealed, maintenance-free
Description Solid-spherical low concavity closing disks (notched optional)
Adjustments TruSet in-cab controls
Mechanical
Base equipment blades Individual dual mount: 45.7 cm
18 in.

Speed

Operating speed 8-11.3 km/h
5-7 mph

Standards

Spacing 61 cm
24 in.

Standards, Option 1

Type Parabolic with or without wear shins, straight with wear shins
Trip force Cushion-trip standard: 1,859.7 kg
4,100 lb
Trip height Shear bolt protected above: 33 cm
13 in.

Tool

Configuration Disk - Disk - Ripper - Closing Disk - Finishing Attachment
Option 5 Folding 13-standard on spacing of 61 cm
24 in.
Option 4 Folding 11-standard on spacing of 61 cm
24 in.
Option 2 Rigid 9-standard on spacing of 61 cm
24 in.
Option 1 Rigid 7-standard on spacing of 61 cm
24 in.
Option 3 Folding 9-standard on spacing of 61 cm
24 in.

Transport clearance

Standard 33 cm
13 in.

Transport width

Option 3 Individual blades: 5.7 m
18.8 ft
Disk gangs: 5.8 m
19.1 ft
Option 5 Individual blades: 5.6 m
18.3 ft
Disk gangs: 5.6 m
Option 4 Individual blades: 5.6 m
18.3 ft
Disk gangs: 5.7 m
18.7 ft
Option 2 Individual blades: 6.9 m
22.5 ft
Disk gangs: 6.9 m
Option 1 Individual blades: 6.1 m
19.9 ft
Disk gangs: 5.7 m
18.8 ft

Underframe clearance

Maximum 95.25 cm
37.5 in.

Wheels

Type Tandem walk-over wheels

Working width

Option 2 5.5 m
18 ft
Option 5 7.9 m
26 ft
Option 3 5.5 m
18 ft
Option 4 6.7 m
22 ft
Option 1 4.3 m
14 ft