2720

  • John Deere
  • Rippers

Contact Your Preferred Store:

John Deere 2720
Key Features & Specs
  • Bury residue to 15-in. (38.1 cm) depths
  • Improved residue flow in wet conditions
  • The most level soil profile from a ripper
  • Exclusive hydraulic rolling basket option
  • Required HP (PTO)/FT 35 to 55 (26.1-41 kW)/ standard
  • Depth Control Single-point
  • Working Speed 5 to 6 mph (8-9.7 km/h)
  • Working Depth up to 16 in (406 mm)
  • Residue Conditions Heavy
  • Residue Management fracture/size/ mix/bury

Specifications

Additional Features

Option 1 Hydraulically adjustable finishing attachments
Knife-edge rolling basket
Round-bar rolling basket

Depth

Maximum operating depth 40.6 cm
16 in.

Depth control

Option 1 Single-point crank
Option 2 TruSet™ tillage

Ground engaging components

Coverboards Parabolic cushion-trip standards with wear shins and holes to mount coverboards
Type Wingless, LaserRip™ II points: 12.7 cm
5 in.
17.8 cm
7 in.
25.4 cm
10 in.

Hitch

Fore-aft adjustment Hitch turnbuckle
Design Single hitch tube: 15.2x25.4 cm
6x10 in.

Horsepower

Horsepower required per standard 66-75.6 kW
41-47 hp

Hydraulics

Option 1 2 SCVs (depth control, optional rolling baskets) at 17,237 kPa
2,500 psi
for optimum raise times
Option 2 3 SCVs (depth control, wingfold, optional rolling baskets) at 17,237 kPa
2,500 psi
for optimum raise times

Key Specs

Transport width With furrow filler attachment: 5.2-5.6 m
16.9-18.4 ft
Standards Spacing
76.2 cm
30 in.
Maximum operating depth 40.6 cm
16 in.
Operating speed 8-11.3 km/h
5-7 mph
Horsepower required per standard 66-75.6 kW
41-47 hp
Working width 3.8-8.4 m
12.5-27.5 ft

Mulching disk components

Rear frame angle 14-16 degree (angle)
Bearings Sealed, maintenance-free
Type of standard C-spring
Scraper Heavy-duty floating combination scraper (base option)
Description Disk - Shank - Disk configuration
Front frame angle Fixed: 18 degree (angle)
Blade spacing 27.9 cm
11 in.
Depth control TruSet in-cab controls
Single-point depth control
Maximum depth 15.2 cm
6 in.
Base equipment blades Solid spherical low-concavity disk blades: 610x6.5 mm
24x0.256 in.

Speed

Operating speed 8-11.3 km/h
5-7 mph

Standards

Spacing 76.2 cm
30 in.

Standards, Option 1

Type Parabolic with or without wear shins, straight with wear shins
Trip force Cushion-trip standard: 1,859.7 kg
4,100 lb
Trip height Shear bolt protected above: 33 cm
13 in.

Tires

Type Tandem walk-over wheels options dependent on configuration
(4)11L-15 FI D LR tires
(4)340/65R18 Goodyear® tires
(4)340/65R18 Michelin® tires

Tool

Configuration Disk - Ripper - Disk - Conditioner
Option 3 Gang-fold rigid 7-standard on spacing of 76.2 cm
30 in.
Option 4 3-section flex-fold 9-standard on spacing of 76.2 cm
30 in.
Option 5 3-section flex-fold 11-standard on spacing of 76.2 cm
30 in.
Option 2 Rigid 7-standard on spacing of 76.2 cm
30 in.
Option 1 Rigid 5-standard on spacing of 76.2 cm
30 in.

Transport clearance

Standard 25.4 cm
10 in.

Transport width

Option 2 With furrow filler attachment: 6.8 m
22.4 ft
Option 3 With furrow filler attachment: 5.5 m
18 ft
Option 1 With furrow filler attachment: 5.2 m
16.9 ft
Option 4 With furrow filler attachment: 5.6 m
18.4 ft
Option 5 With furrow filler attachment: 5.6 m
18.4 ft

Underframe clearance

Maximum 95.25 cm
37.5 in.

Wheels

Type Walk-Over tandem wheels, 57.2-mm (2.25-in.) diameter plug-in spindles and bolt hubs

Working width

Option 4 6.9 m
22.5 ft
Option 3 5.3 m
17.5 ft
Option 1 3.8 m
12.5 ft
Option 2 5.3 m
17.5 ft
Option 5 8.4 m
27.5 ft