Key Features & Specs
- Gang angle 21° Front/19° Rear
- Working Widths from 20'9" to 40'8"
- Operating Speeds 7-10 mph
- Working Speed 7 to 10 mph (11.4-16 km/h)
- Required HP (Engine)/FT 8.5 to 11 (20.8-26.95 kw/m)
- Residue Conditions light/medium/heavy
- Working Depth up to 3 in (76 mm)
- Depth Control TruSet/Single point
- Weight /blade 197 lbs to 227 lbs (89.4-103 kg)
Specifications
Key Specs
Operating speed | 11.4-16.1 km/h 7-10 mph |
Transport width | 4.2 m 13.67 ft |
Working depth | Up to 7.6 cm 3 in. |
Horsepower requirement | 193.5-236.8 kW 263-322 hp |
Blade spacing | 18.4 cm 7.25 in. |
Transport height | 4.3 m 14.1 ft |
Machine
Note | Flat bar is not recommended for rocky soil conditions. |
Standards | C-spring |
Rolling basket | Round bar or flat bar (see note below) |
Number of blades | 96 |
Transport width | 4.2 m 13.67 ft |
Weight | 9,227 kg 20,343 lb |
Gang angle | Front: 21 degree (angle) Rear: 19 degree (angle) |
Weight per blade | 95.7 kg 211 lb |
Operating speed | 11.4-16.1 km/h 7-10 mph |
Working depth | Up to 7.6 cm 3 in. |
Horsepower requirement | 193.5-236.8 kW 263-322 hp |
Transport height | 4.3 m 14.1 ft |
Front gang blades | Solid shallow concavity spherical: 559x4.5 mm 22x0.197 in. |
Rear gang blades | Solid shallow concavity 13 wave: 559x4.5 mm 22x0.197 in. |
Blade spacing | 18.4 cm 7.25 in. |