Specifications

Cutterbar

Cutterbar protection ShearHub
Adjustable gauge shoes Yes
Angle adjustment Manual or hydraulic
Type John Deere
Angle range 2-8 degree (angle)
Number of knives 14
Disk speed 2,650 rpm
Number of disks 7
Cutterbar oil check Combination check, drain plug
Disk drive Gear
Lubrication Hy-Gard oil
Cutting width 3.5 m
11.5 ft
Cutting height 2.8-9.8 cm
1.1-3.8 in.
Oil reservoir capacity 8 L
8.5 U.S. qt
Knife tip speed 307 km/h
191 mph

Dimensions

Standard tires 11L-15 standard, 31x13.5L 15 optional
31x13.5L 15 optional
Transport length 6.2 m
20.6 ft
Weight, impeller conditioner 2,233 kg
4,923 lb
With Urethane roll conditioner: 2,388 kg
5,264 lb
With Steel roll conditioner: 2,450 kg
5,400 lb
With Impeller roll conditioner: 2,233 kg
Transport width 3.5 m
11.5 ft

Impeller conditioner

Number of tines 57
Tines type V-tines
Number of speeds Two
Drive 3-V powerband belt and sheaves
Diameter 25.4 cm
10 in.
Width 236 cm
92.7 in.

Key Specs

Optional hitch Equal angle, Rockshaft swivel or Drawbar swivel
Standard hitch Clevis
PTO speed 1000 rpm
Hydraulic pressure required 13,790 kPa
2,000 psi
1000 rpm 1-3/8 in. PTO 90-150 hp
68-112 kW
Cutterbar - cutting width 3.5 m
11.5 ft
Number of disks/knifes 7
14
Transport width 3.5 m
11.5 ft

Rolls conditioner

Speed 664 rpm
Type of material Urethane or Steel
Design Urethane: Recessed cleat, Steel: Intermeshing flutes V-10
Width 236 cm
92.7 in.
Diameter 25.4 cm
10 in.

Tractor equipment

Standard hitch Clevis
Tractor connection 21 spline
Optional hitch Equal angle, Rockshaft swivel or Drawbar swivel
Hydraulic pressure required 13,790 kPa
2,000 psi

Additional information

Date collected August 24, 2020