Specifications

Cutterbar

Cutterbar protection ShearHub
Number of knives 12
Lubrication Hy-Gard oil
Angle range 2-8 degree (angle)
Disk speed 2,650 rpm
Disk drive Gear
Type John Deere
Number of disks 6
Angle adjustment Manual or hydraulic
Cutterbar oil check Combination check, drain plug
Adjustable gauge shoes Yes
Cutting height 2.8-9.8 cm
1.1-3.8 in.
Oil reservoir capacity 7 L
7.4 U.S. qt
Knife tip speed 307 km/h
191 mph
Cutting width 3 m
9.75 ft

Dimensions

Standard tires 11L-15 standard, 31x13.5L optional
31x13.5L 15 optional
Transport length
With equal angle 6.2 m
20.6 ft
Transport width
3 m
9.75 ft
Weight, impeller conditioner 2,130 kg
4,696 lb
With Urethane roll conditioner: 2,272 kg
5,012 lb
With Steel roll conditioner: 2,322 kg
5,120 lb
With Impeller conditioner: 2,130 kg

General

Are wrenches required for adjusting?

Impeller conditioner

Tines type V-tines
Number of tines 45
Drive 3-V powerband belt and sheaves
Number of speeds Two
Width 185.4 cm
73 in.
Diameter 59.4 cm
23.4 in.

Key Specs

PTO speed 540 or 1000 rpm
Optional hitch Equal angle, Rockshaft swivel or Drawbar swivel
Standard hitch Clevis
1000 rpm 1-3/8 in. PTO 65-150 hp
48-112 kW
Cutterbar - cutting width 3 m
9.75 ft
Transport width 3 m
9.75 ft
Number of disks/knifes 6
12
Hydraulic pressure required 13,790 kPa
2,000 psi

Power requirements

PTO speed 540 rpm
540 rpm PTO 65-81 hp
48-60 kW

Rolls conditioner

Design Urethane: Recessed cleat, Steel: Intermeshing flutes V-10
Speed 664 rpm
Drive Telescoping shaft
Type of material Urethane or steel
Width 187.8 cm
73 in.

Tractor equipment

Standard hitch Clevis
Optional hitch Equal angle, Rockshaft swivel or Drawbar swivel
Tractor connection 21 spline
Hydraulic pressure required 13,790 kPa
2,000 psi

Additional information

Date collected August 24, 2020