Key Features & Specs
- Reduce service time with Quick Change Knives
- Updated design and styling
- Decreased horsepower and fuel requirements due to lighter weight1
- Easier serviceability with modular-design cutterbar
- Impeller, urethane or V-10 conditioners
- PTO Speed 1,000 rpm only
- Cutting Width 13 ft. (4.0 m)
- Cutting Height 0.63 to 6.7 in. (16 to 170 mm)
- Discs 8
- 1,000-rpm PTO, 1 3/8" shaft 100 to 150 hp (75 to 112 kW)
- 540-rpm PTO, 1 3/8" shaft N/A
Specifications
Dimensions
Standard tires | 11L-15 standard 31x13.5L 15, 8PR |
Transport length | 8.2 m 26.9 ft |
Weight, impeller conditioner | 2,934 kg 6,470 lb With Urethane roll conditioner: 2,996 kg 6,605 lb With V-10 Steel roll conditioner: 3,086 kg 6,805 lb |
Transport width | 4 m 13 ft |
Impeller conditioner
Drive | 3-V powerband belt and sheaves |
Tines type | V-tines |
Number of tines | 72 |
Number of speeds | Two |
Width | 268 cm 106 in. |
Diameter | 59.5 cm 23.4 in. |
Key Specs
Optional hitch | Drawbar swivel |
PTO speed | 1000 rpm |
Standard hitch | Rockshaft swivel |
Transport width | 4 m 13 ft |
Number of disks/knifes | 8 16 |
Cutterbar - cutting width | 4 m 13 ft |
Hydraulic pressure required | 15,513 kPa 2,250 psi |
1000 rpm 1-3/8 in. PTO | 95-150 hp 71-112 kW |
Rolls conditioner
Type of material | Urethane or Steel |
Speed | 800 rpm |
Drive | Telescoping shaft |
Design | Urethane: Recessed cleat, Steel: Intermeshing flutes V-10 |
Width | 279 cm 110 in. |
Diameter | 25.4 cm 10 in. |
Tractor equipment
Standard hitch | Rockshaft swivel |
Tractor connection | 21 spline |
Optional hitch | Drawbar swivel |
Hydraulic pressure required | 15,513 kPa 2,250 psi |
Additional information
Date collected | August 24, 2020 |