Specifications

Cutterbar

Adjustable gauge shoes Yes
Number of disks 7
Type John Deere
Cutterbar protection ShearHub
Disk drive Gear
Angle adjustment Manual or hydraulic
Lubrication Hy-Gard oil
Angle range 2-8 degree (angle)
Cutterbar oil check Combination check, drain plug
Disk speed 2,650 rpm
Number of knives 14
Cutting width 3.5 m
11.5 ft
Knife tip speed 307 km/h
191 mph
Cutting height 2.0-9.5 cm
0.8-3.8 in.
Oil reservoir capacity 8.5 L
9 U.S. qt

Dimensions

Transport length 6.3 m
20.6 ft
Weight, roll conditioner Swivel 2,978 kg
6,565 lb
Standard tires 11L-15 standard
11L-15, Optional: 31x13.5L 15
Weight, impeller conditioner With Equal angle 2,479 kg
5,465 lb
Swivel 2,762 kg
6,089 lb
With Urethane roll conditioner: 2,633 kg
5,805 lb
Swivel 2,916 kg
6,429 lb
With Steel roll conditioner: Equal angle 2,695 kg
5,941 lb
Transport width 3.5 m
11.5 ft

Impeller conditioner

Drive 3-V powerband belt and sheaves
Number of tines 57
Tines type V-tines
Number of speeds Two
Width 236 cm
92.7 in.
Diameter 60 cm
23.5 in.

Key Specs

Optional hitch Rockshaft swivel or Drawbar swivel
PTO speed 1000 rpm
Standard hitch Equal angle
Hydraulic pressure required 13,790 kPa
2,000 psi
Cutterbar - cutting width 3.5 m
11.5 ft
Transport width 3.5 m
11.5 ft
1000 rpm 1-3/8 in. PTO 90-150 hp
68-112 kW
Number of disks/knifes 7
14

Rolls conditioner

Design Urethane: Recessed cleat, Steel: Intermeshing flutes V-10
Drive Telescoping shaft
Type of material Urethane or Steel
Speed 664 rpm
Width 236 cm
92.7 in.
Diameter 25.4 cm
10 in.

Tractor equipment

Standard hitch Equal angle
Tractor connection 21 spline
Optional hitch Rockshaft swivel or Drawbar swivel
Hydraulic pressure required 13,790 kPa
2,000 psi

Additional information

Date collected August 24, 2020