Key Features & Specs
- Full-width feeding pickup
- 540-rpm PTO power shaft
- Deep-flighted auger feeding
- Hydraulic bale tension available
Specifications
Auger
Length | 154.9 cm 61 in. |
Diameter | 41 cm 16 in. |
Bale Chute
Wagon hitch | Optional |
Side bale drop chute | Optional |
Long chute | Optional |
Short chute | Optional |
Bale Ejector
Available | Optional |
Bale size
Length | 30.5 to 127 cm 12 to 50 in. |
Height x width | 36 x 46 cm 14 x 18 in. |
Baler dimensions
Weight empty | 1272 kg 2805 lb |
Length w/ long tongue | 576.5 cm 227 in. |
Width | 274.3 cm 108 in. |
Height | 170.2 cm 67 in. |
Density Control System
Adjustable Hydraulic Bale Density | Optional |
Adjustable Bale Density | Mechanical crank |
Drive mechanism
Plunger | Gear and shaft |
Feeder forks | Gear and shaft |
Driveline | Equal angle 3 joint category 4 |
Pickup | Belt |
Knotters | Gear and shaft |
Drivetrain protection
Knotters | Shear bolt |
Pickup | Belt slip |
Needles | Shear bolt/plunger head stop |
Key Specs
Pickup width | 187.9 cm 74 in. |
Plunger - Strokes/minute | 80 spm |
Bale size | Height x width 36x46 cm 14x18 in. Length 30.5 to 127 cm 12 to 50 in. |
Minimum PTO | 26 kW 35 PTO hp |
Adjustable Hydraulic Bale Density | Optional |
Pickup
Lift control | Crank (hydraulic optional) |
Tooth bars/teeth | 6 bars, 156 teeth |
Pickup width | 187.9 cm 74 in. |
Pickup diameter | 49.5 cm 19.5 in. |
Plunger
Strokes/minute | 80 spm |
Tires
LH Standard tire size | 11L-14, 6 ply |
Gauge Wheels | 1 optional |
Pickup Gauge Wheels Tires Size | 16.5x6.50-8 |
RH Standard tire size | 26x12.0-12, 4 ply |
Tractor requirements
Minimum PTO | 26 kW 35 PTO hp |
PTO speed | 540 rpm |
Typing mechanism
Wire ball capacity | 4 |
Twine type | Plastic or sisal |
Twine capacity | 8 |
Central lube system | Optional |
No. of knotters | 2 |