Papé Machinery Agriculture & Turf

Visit Papé.com

Portal

Papé Machinery Agriculture & Turf

RD30F

John Deere
Draper Platforms

Contact Your Preferred Store:

John Deere RD30F

Key Features & Specs

Harvest crops as close as possible to the ground with the HydraFlex™ cutterbar
Minimize grain loss with a two-speed center feed section
Enable higher harvesting speed without sacrificing cut quality with a 4” double cut, dual drive, shaft driven cutterbar
Get more done by eliminating header calibrations

Width 30 ft.

Specifications

Cutterbar

Knife drive	Double-cut, dual-drive, shaft-driven cutterbar: 10.2 cm 4 in.
Type	Straight-line knife drive system Cutterbar vertical flex: 190 mm 7.5 in.
Length	9.14 m 30 ft
Knife speed	X Series Combine: 520 cycles/min S-Series Combine: 490 cycles/min
Base skid shoe height	3.8 cm 1.5 in.

Dimensions

Platform length	10.07 m 33 ft
Transport width, field position	10.07 m 33 ft
Overall operating depth	With dividers: 2.74 m 9 ft

Draper belts

Cleat height	Cross belt cleat height: 19.05 mm 0.75 in.
Center belt reverse	Base
Width	Cross belt: 101.6 cm 40 in. Center belts: 177.8 cm 70 in.
Operating speed	Side belts (variable): 1-3.5 m/s 3.3-11.5 fps Center belts: 211 m/min 692 fpm Low-speed center belt (fixed): 4.2 m/s 13.8 fps High-speed center belt (fixed): 5.1 m/s 16.7 fps
Belt depth	101.2 cm 39.8 in.
Speed control	Hydraulic from cab (side belts only)

Feed drum

Drum/auger reverse	Base
Number of fingers	21
Finger reach	152 mm 6 in.
Auger finger platform	Triple chevron, retracting
Center cleanout door	Base
Feed drum fingers	Heavy-duty and round with breakaway notch and retainer Diameter: 16 mm 0.625 in.
Operating speed	Low speed: 200 rpm High speed: 240 rpm
Diameter	414 mm 16.3 in.

Header height sensing

Header height sensing off the ground	Optional: three sensors
Type	Electrohydraulic
Header height sensing on the ground	Base

Key Specs

Cutterbar length	9.14 m 30 ft
Knife speed	X Series Combine: 520 cycles/min S-Series Combine: 490 cycles/min
Pickup reel operating speeds	6-70 rpm
Draper belts speed control	Hydraulic from cab (side belts only)
Knife drive	Double-cut, dual-drive, shaft-driven cutterbar: 10.2 cm 4 in.

Pickup reel

Reel fore and aft	35.9 cm 14.1 in.
Height control	Hydraulic
Number of slats	Base: six bat poly Optional: steel tine
Diameter	106.7 cm 42 in.
Fingers	Base: nylon Optional: steel
Fore of the cutterbar	40.6 cm 16 in.
Reel reverse	Base
Speed control	Hydraulic
Operating speeds	6-70 rpm
Reel lift	72 cm 28.3 in.
General	One-piece, poly tine pickup reel with 10-in. (25-cm) tube
Reel resume	Base

Platform

Type

Rigid frame flexible cutterbar

Top auger

Type	Optional: hydraulic drive
Size	45.7 cm 18 in.

Weight

Approximate weight

3447 kg
7600 lb

Additional information

Date collected

15 June 2020

Request a Quote

Fill out this form to request a quote. A representative will get in touch with you as soon as possible.

First Name^* This field is required.

Last Name^* This field is required.

Your Email^* This field is required.

Phone Number^* This field requires 10 digits.

Zipcode^* This field is required.

Location^*

Company

Machine

Additional Comments

Clear all

Request Service

Fill out our request form to contact us about service.

First Name^* This field is required.

Last Name^* This field is required.

Your Email^* This field is required.

Phone Number^* This field requires 10 digits.

Zipcode^* This field is required.

Location^*

Company

Additional Comments

Clear all

Request Parts

Fill out our request form to contact us about parts.

First Name^* This field is required.

Last Name^* This field is required.

Your Email^* This field is required.

Phone Number^* This field requires 10 digits.

Zipcode^* This field is required.

Location^*

Company

Additional Comments

Clear all

Request Used Parts

Fill out our request form to contact us about used parts.

First Name^* This field is required.

Last Name^* This field is required.

Your Email^* This field is required.

Phone Number^* This field requires 10 digits.

Zipcode^* This field is required.

Location^*

Company

Additional Comments

Clear all

Request Rental

Fill out our request form to contact us about rentals.

First Name^* This field is required.

Last Name^* This field is required.

Your Email^* This field is required.

Phone Number^* This field requires 10 digits.

Zipcode^* This field is required.

Location^*

Company

Rental Type

Additional Comments

Clear all

Contact us about Precision Ag

Fill out our request form to contact us about precision ag technology.

First Name^* This field is required.

Last Name^* This field is required.

Your Email^* This field is required.

Phone Number^* This field requires 10 digits.

Zipcode^* This field is required.

Location^*

Company

Additional Comments

Clear all

Contact us

Fill out our contact form and a representative will be back in touch with you soon.

First Name^* This field is required.

Last Name^* This field is required.

Your Email^* This field is required.

Phone Number^* This field requires 10 digits.

Zipcode^* This field is required.

Company

Location^*

Additional Comments

Clear all

Learn More About Our Service Programs

First Name^* This field is required.

Last Name^* This field is required.

Your Email^* This field is required.

Phone Number^* This field requires 10 digits.

Zipcode^* This field is required.

Company

Location^*

I want to learn more about...^*

Additional Comments

Clear all

Send us your feedback

We'd love to hear your feedback! Please fill out the form below to share.

First Name^* This field is required.

Last Name^* This field is required.

Your Email^* This field is required.

Phone Number^* This field requires 10 digits.

Zipcode^* This field is required.

Location^*

Company

Additional Comments^*

Clear all

Body Shop

Fill out this form to get in contact with our body shop. A representative will get in touch with you as soon as possible.

First Name^* This field is required.

Last Name^* This field is required.

Your Email^* This field is required.

Phone Number^* This field requires 10 digits. This field is required.

Location^*

Make

Model

VIN

Company

Are you currently working with an insurance company? If so, provide the company and claim number.

Description of damage^* This field is required.

How will the truck be brought to the Body Shop? i.e. towed, driven in, other

Do you need assistance with a tow? Yes
No

Clear all

Papé Technician Training Program Interest Application

First Name^* This field is required.

Last Name^* This field is required.

Phone Number^* This field requires 10 digits.

Company

Can this number receive text messages?

Your Email^* This field is required.

Alternative Phone Number This field requires 10 digits.

Address^*

High school/College

Graduation Year

Which Company Technician Program are you looking for?^*
Papé Machinery Construction & Forestry
Papé Machinery Agriculture & Turf
Papé Material Handling
Papé Kenworth

Clear all

Join The Papé Team

Fill out our career form and a representative will be back in touch with you soon.

First Name^* This field is required.

Last Name^* This field is required.

Your Email^* This field is required.

Phone Number^* This field requires 10 digits.

Zipcode^* This field is required.

Location^*

Company

Desired Location^*

Category^*

Additional Comments

Clear all

Contact us

Fill out our contact form and a representative will be back in touch with you soon.

First Name^* This field is required.

Last Name^* This field is required.

Your Email^* This field is required.

Phone Number^* This field requires 10 digits.

Zipcode^* This field is required.

Company

Location^*

Additional Comments

Clear all

Thank you for coming in, you are important to us! Please fill in your information below and one of our members will help you as soon as we can.

First Name^* This field is required.

Last Name^* This field is required.

Your Email^* This field is required.

Phone Number^* This field requires 10 digits.

Zip Code^* This field is required.

Location^*

Company Name

Product(s) I'm interested in

Preferred Contact Method^*
Contact by Phone
Contact by Email

Clear all

Thank you for your interest in electrification, you are important to us! Please fill in your information below and one of our members will reach out to you as soon as we can.

First Name^* This field is required.

Last Name^* This field is required.

Your Email^* This field is required.

Phone Number^* This field requires 10 digits.

Zip Code^* This field is required.

Location^*

Company Name

Product(s) I'm interested in

Preferred Contact Method^*
Contact by Phone
Contact by Email

Clear all

Giveaway Submission

First Name^* This field is required.

Last Name^* This field is required.

Email Address^* This field is required.

Phone Number^* This field is required.

City^* This field is required.

Select State^*

Zip Code^* This field is required.

I am interested in receiving email newsletters about the following products:^* John Deere Lawn or Agriculture
John Deere Construction Equipment
Kenworth Trucks
Hyster®, Yale® or Material Handling
Ditch Witch® Equipment

Clear all

Contact us

Fill out our contact form and a representative will be back in touch with you soon.

First Name^* This field is required.

Last Name^* This field is required.

Your Email^* This field is required.

Phone Number^* This field requires 10 digits.

Street^* This field is required.

City^* This field is required.

State/Province^*

Zipcode^* This field is required.

Company^* This field is required.

Location^*

Annual Revenue^* This field is required.

Vocation^* This field is required.

Gross Vehicle Weight Rating^* This field is required.

Fleet Class^*

Fleet Size^* This field is required.

Additional Comments

Clear all

Thank you for your interest in upgrading to a premium John Deere compact utility tractor. Please fill in your information below and a Papé Machinery member will contact you shortly.

First Name^* This field is required.

Last Name^* This field is required.

Your Email^* This field is required.

Phone Number^* This field requires 10 digits.

Zip Code^* This field is required.

Location^*

Product(s) I'm interested in

Clear all

Change Your Store

Ponderay, ID

Moscow, ID

Tekoa, WA

Colfax, WA

Four Lakes, WA

Walla Walla, WA

Okanogan, WA

Quincy, WA

Fallon, NV

Yerington, NV

Ellensburg, WA

Yakima, WA

Madras, OR

Bend, OR

Snohomish, WA

Merrill, OR

Fall River Mills, CA

Sumner, WA

Mount Vernon, WA

Gresham, OR

Lynden, WA

Poulsbo, WA

Olympia, WA

Donald, OR

Chehalis, WA

Gridley, CA

Chico, CA

Yuba City, CA

Salem, OR

Hillsboro, OR

Robbins, CA

Tangent, OR

Woodland, CA

McMinnville, OR

Shasta Lake, CA

Harrisburg, OR

Eugene, OR

Medford, OR

Colusa, CA

Dixon, CA

Willows, CA

Roseburg, OR

Fernbridge, CA

Hilo, HI

Wailuku, HI

Kailua-Kona, HI

Kapolei, HI

Lihue, HI

Personalize Your Experience

Highlight local Pape offers, dealers, and inventory by entering your ZIP code.

Continue To Site