Specifications

Cutterbar

Type Straight-line knife drive system
Knife speed X Series Combine: 520 cycles/min
S-Series Combine: 490 cycles/min
Base skid shoe height 3.8 cm
1.5 in.
Knife drive Double-cut, dual-drive, shaft-driven cutterbar: 10.2 cm
4 in.
Length 10.7 m
35 ft

Dimensions

Overall operating depth With dividers: 3.2 m
10.6 ft
Platform length 11.5 m
37.8 ft

Draper belts

Cleat height Cross belt cleat height: 19 mm
0.75 in.
Speed control Hydraulic from cab (side belts only)
Belt depth 100 cm
39.8 in.
Width Side belts: 4.4 m
14.3 ft
Center belts: 200 cm
79 in.
Center belt reverse Base

Feed drum

Finger reach 152 mm
6 in.
Drum/auger reverse Base
Number of fingers 18
Diameter 40.6 cm
16 in.
Auger finger platform Triple chevron, retracting
Center cleanout door Base
Feed drum fingers Heavy-duty and round with breakaway notch and retainer
Diameter: 16 mm
0.625 in.
Operating speed Low speed: 200 rpm
High speed: 240 rpm

Header height sensing

Header height sensing off the ground Base
Type Electrohydraulic
Header height sensing on the ground Base

Key Specs

Knife speed X Series Combine: 520 cycles/min
S-Series Combine: 490 cycles/min
Knife drive Double-cut, dual-drive, shaft-driven cutterbar: 10.2 cm
4 in.
Draper belts speed control Hydraulic from cab (side belts only)
Pickup reel operating speeds 8-70 rpm
Cutterbar length 10.7 m
35 ft

Pickup reel

Fingers Base: nylon
Optional: steel
Reel lift Off the cutterbar: 100.6 cm
39.6 in.
Reel resume Base
Number of slats Base: six bat poly
Optional: steel tine
Speed control Hydraulic
Reel fore and aft Fore of the cutterbar: 26.4 cm
10.4 in.
Diameter 106.7 cm
42 in.
Height control Hydraulic
Reel reverse Base
Operating speeds 8-70 rpm

Platform

Type Hinged frame flexible cutterbar

Top auger

Fingered augers Optional
Type Optional: hydraulic drive
250-350 rpm
Size Diameter: 43.2 cm
17 in.

Additional information

Date collected 24 Mar 2021